- Home
- Products
- USB2.0 SD Card Reader
- 2-In-1 USB 2.0 SD/TF Card Reader
2-In-1 USB 2.0 SD/TF Card Reader
The entry model in the reader range: SD and microSD in one USB 2.0 body, plug and play, built for volume programmes.
Product Overview
Every reader range needs a floor, and this is it: two slots, USB 2.0, no driver, nothing else. It exists for the orders where the reader is a line item in a bundle rather than a product in its own right, which is most of the volume in this category: a reader packed with a memory card, issued with a laptop, or given away at a trade show. The source page publishes the interface and slot arrangement and nothing further, so housing material and certification are confirmed with the specification sheet rather than guessed at here.
Key Benefits
- Lowest unit cost in the reader range, which is what a bundle line item needs
- SD and microSD in one body
- Plug and play with no driver
- Built in our own plant, so volume and lead time are ours to commit to
At A Glance
- Family
- USB 2.0 Card Reader
- Category
- USB2.0 SD Card Reader
- Interface
- USB 2.0
- Card slots
- SD and microSD (TF)
- Slots
- 2-in-1
- Driver
- Not required; plug and play
Who It Is For
- Volume and promotional buyers working to a unit price
- Brands that need an entry SKU beneath a 3.0 model
- Memory card sellers building bundles
- Distributors supplying bulk-packed accessories
Problems It Solves
- A bundle cannot carry the cost of a premium reader
- Cards sold without a reader generate support questions
- Laptops have no card slot
- MicroSD cards need a sleeve without a dedicated slot
Application Scenarios
- Packed in a bundle with a memory card
- Trade show and promotional giveaways
- Issued alongside laptops that have no card slot
- Entry price point on a marketplace listing
Technical Features
- USB 2.0 interface
- Two slots: SD and microSD (TF)
- Plug and play, no driver required
Published Specification
Every row below is reproduced from the factory specification for this model. Rows shown in italics are figures the specification does not publish; we confirm those in writing rather than estimating them here.
| Interface | USB 2.0 |
| Card slots | SD and microSD (TF) |
| Slots | 2-in-1 |
| Driver | Not required; plug and play |
| Housing | Confirmed per order; not published on the source page |
| Packing | Bulk, poly bag or retail pack, per order |
| Certification | Confirmed per order; not published on the source page |
Use Guide
- Plug into any USB-A port
- USB 2.0 is the interface limit; specify the 3.0 reader where speed is part of the offer
- Eject through the operating system before removing the card
- Specify packing early, because bulk and retail packing change the landed cost more than the reader does
Quality Control
- Every unit function-tested on both slots
- Reference-card transfer verified per batch
- Enclosure fit inspected
- Packing count verified per carton
How It Compares With The Alternatives
A technical comparison against other ways of solving the same problem, including the other products in this range. Nothing here is a performance claim against a named competitor product.
| Against the USB 3.0 reader | Cheaper; slower on a full card |
| Against the dual-connector readers | USB-A only, at a lower cost |
| Against the 4-in-1 reader | Two slots instead of four, in a simpler body |
| Against no reader in the bundle | Removes the most common support question after a memory card sale |
Customisation And Supply
- Packing as bulk, poly bag or retail pack, specified per order
- Printed or laser-marked housings where the tooling allows it
- Specification sheet supplied by email before the order, not after it
- Samples of the exact configuration before mass production
- Shipped from Shenzhen, China by sea or air
2-In-1 USB 2.0 SD/TF Card Reader Questions
What is the minimum order quantity?
Can it be supplied unbranded?
Which cards does it take?
Is a driver needed?
Products Buyers Shortlist Alongside This One
2-In-1 USB 2.0 SD/TF Card Reader With Type-C And USB-A Connectors
An aluminium-alloy card reader with a USB-A plug at one end and a Type-C plug at the other, reading SD and microSD cards on a laptop or a phone without an adapter.
See the specification
2-In-1 USB 2.0 SD/TF Card Reader For PC, Laptop And Mac
A dual-connector USB 2.0 reader with SD and microSD slots, specified for PC, laptop and Mac use. Plug and play with no driver.
See the specification
4-In-1 USB-A Micro SD/TF Card Reader 2.0
A four-in-one USB 2.0 reader with a USB-A connector and a micro USB connector, published in black, blue, green and white.
See the specificationRequest 2-In-1 USB 2.0 SD/TF Card Reader
Send the quantity, the destination market and the packing you need. A quotation and the full specification sheet come back by email.