Laser Marking Machines
Glass Laser Sandblasting Machine
The WH-F1325 and WH-F1530 are large-format fiber laser sandblasting machines designed for paint and mirror removal on glass, as well as surface...
Laser Marking Machines
Mini laser marking machine
The WH-F20 is a compact fiber laser marking machine with a 100 x 100 mm work area and a laser source selectable at 20 W, 30 W or 50 W. It uses a China Raycus fiber laser source and a Beijing SINO galvo head to mark metals such as gold, silver, stainless...
Product Overview
What This Machine Is Built To Do
The WH-F20 is a compact fiber laser marking machine with a 100 x 100 mm work area and a laser source selectable at 20 W, 30 W or 50 W. It uses a China Raycus fiber laser source and a Beijing SINO galvo head to mark metals such as gold, silver, stainless steel, brass, aluminium and steel, plus non-metals including ABS, nylon, PES and PVC. The independent work table and small footprint allow it to fit on a bench or move between sites. It is built for workshops that need permanent marks without the power draw or maintenance burden of larger systems.
- Marks gold, silver, stainless, brass, aluminium and steel from one machine
- 100 x 100 mm marking area suits small parts like jewelry, tools and electronic components
- China Raycus fiber laser source provides stable output for 20 W, 30 W or 50 W options
- Beijing SINO galvo head delivers marking line widths from 0.01 mm to 0.1 mm
- Air cooling eliminates the need for a separate chiller or coolant maintenance
- Power consumption of 0.5 kW per hour reduces operating cost compared to larger lasers
- Maintenance-free within 100,000 hours allows continuous 24-hour operation
Where It Is Used
Application Scenarios
- Jewelry workshops marking gold and silver rings with serial numbers or logos
- Electronics manufacturers marking ABS or PVC components with barcodes or QR codes
- Tool shops engraving stainless steel instruments with part numbers
- Small batch producers marking nylon or PES parts for traceability
- Home workshops needing a compact machine that fits on a standard desk
Buyer Fit
Who It Is For
- Jewelers marking precious metals with fine detail
- Electronics assemblers needing permanent marks on plastic housings
- Tool and die shops marking serial numbers on small metal parts
- Machine dealers stocking compact marking solutions for small workshops
- Manufacturers replacing inkjet or dot peen marking with laser permanence
Process Problems
Problems It Solves
- Inkjet marks fade over time, causing loss of traceability on metal and plastic parts
- Large laser markers consume floor space and power, making them impractical for small shops
- Water-cooled systems require chiller maintenance and coolant changes, adding downtime
- Manual marking methods like dot peen are slow and inconsistent for high-volume small parts
- High power consumption increases operating costs for machines running 24 hours
Engineering
Technical Features
- China Raycus fiber laser source with 10,000 hours service time
- Beijing SINO galvo head for precise beam deflection
- Beijing JCZ control software supporting AI, BMP, PLT and DXF file formats
- Air cooling system for maintenance-free operation
- Independent work table for easy setup and portability
- Compact structure suitable for home or field use
- High electro-optic conversion efficiency with little energy coupling loss
Specifications
Published Figures For Mini laser marking machine
Every value below is taken from the machine data sheet. Where a range is given the exact figure depends on the model and power you order.
| Model | WH-F20 |
|---|---|
| Laser Type | Fiber laser |
| Laser Power | 20 W / 30 W / 50 W |
| Work Size | 100 x 100 mm |
| Software | Beijing JCZ |
| File Formats | AI, BMP, PLT, DXF |
| Marking Line Width | 0.01 mm - 0.1 mm |
| Marking Depth | 0.01 - 2 mm |
| Voltage | AC110/220V, 50Hz/60Hz |
| Cooling Way | Air cooling |
| Power Consumption | 0.5 KW/Hour |
| Package Size | 92 x 46 x 55 cm |
| Laser Source | China Raycus |
| Galvo Head | Beijing SINO |
Materials
Materials It Handles
- Gold
- Silver
- Stainless Steel
- Brass
- Aluminium
- Steel
- ABS
- Nylon
- PES
- PVC
Working Process
From File To Finished Part
Import AI, BMP, PLT or DXF file into Beijing JCZ software
Position part on the independent work table within 100 x 100 mm area
Adjust focus and power settings for material type and desired depth
Run marking process with air-cooled fiber laser source
Inspect mark quality and line width between 0.01 mm and 0.1 mm
Quality Control
Quality Control Before Shipment
- Laser source selected for 10,000 hours service time stability
- Galvo head calibrated for consistent marking line width
- Power output checked for stability across 20 W, 30 W and 50 W settings
- Machine tested for 24-hour operation under severe working conditions
Options
Customisation Options
- Choose 20 W, 30 W or 50 W laser source based on marking speed needs
- Voltage configuration set for AC110V or AC220V markets
- Software language and file format support adjusted for local requirements
- Work table height or fixture options for specific part geometries
Comparison
How It Compares With The Alternatives
| CO2 laser marking machine | Fiber laser marks metals directly and lasts longer, but CO2 is better for thick acrylic or wood |
|---|---|
| Dot peen marking machine | Laser marking is faster and leaves no physical stress on thin parts, though dot peen works on curved surfaces without focus adjustment |
| Large desktop fiber marker | The WH-F20 is portable and uses less power, but large desktop models offer bigger marking areas for oversized parts |
Operating Notes
Use Guide
- Ensure adequate ventilation for air-cooled operation in enclosed spaces
- Clean lens regularly to maintain marking depth and line width accuracy
- Adjust power and frequency settings for non-metals like ABS or PVC to avoid burning
- Use DXF files for vector graphics to ensure sharp edges on metal marks
- Check voltage setting before powering on to match local supply
Buyer Questions
Mini laser marking machine FAQ
What is the maximum marking area?
The standard work size is 100 x 100 mm, which suits small parts like jewelry, tools and electronic components.
Can it mark on plastic?
Yes, it marks on non-metal materials including ABS, Nylon, PES and PVC, in addition to metals like gold, silver and stainless steel.
How long does the laser source last?
The China Raycus fiber laser source has a service time of 10,000 hours and is maintenance-free within 100,000 hours.
What power consumption does it have?
It consumes just 0.5 KW/Hour, making it efficient for continuous operation.
Is it portable?
Yes, the compact structure and independent work table make it easy to carry and suitable for both home and field use.
What file formats are supported?
The Beijing JCZ software supports AI, BMP, PLT and DXF file formats for importing designs.
Related Machines
All machines
Laser Marking Machines
Portable Laser Marking Machine
The WHF-20W and WHF-30W are portable fiber laser marking machines with a 1064 nm source, an 8-inch touch controller and a sandblasted anodized...
Laser Marking Machines
UV Laser Marking Machine
The WH-5W is a desktop UV laser marking machine with a 355 nm wavelength and a JPT laser source, rated at 5 W.
Laser Marking Machines
30W Fiber Laser Marking Machine
The 30W Fiber Laser Marking Machine is a desktop unit with a 1064 nm ±1 nm wavelength and a marking scope selectable from 110 x 110 mm to 175 x 175...
Ask For A Quote On The Mini laser marking machine
Send your material, thickness and daily output. We reply with the exact configuration, packing size and shipping route within 24 hours.