Office Furniture Manufacturer Middle Back Mesh Task Office Chair
Model DLS-2205M. A compact mesh task family on a 300MM nylon base, with a matching powder coated sled base visitor chair. This is the middle back version, the workstation chair of the series, sized to clear a low partition without a headrest. The catalogue lists this one as a task chair. Product size W60*D62*H112.5-117.5CM, packed 2pcs/ctn, in a W65*D61*H61CM carton, at 0.242 CBM.
- Mechanism: Swivel tilt mechanism
- Base: 300MM nylon base
- Gas Lift: Class 3
- Armrest: Fixed PP arms
- Product Size: W60*D62*H112.5-117.5CM
What This Model Gives You
- Middle back, high back and sled base visitor versions
- Swivel tilt mechanism with Class 3 gas lift on castored models
- Compact 60 x 62 cm footprint for dense layouts
- 300MM nylon base on this version
- Fixed PP arms
- 300MM nylon base with nylon casters
- Supplied with a class 3 gas lift on model DLS-2205M
Who It Is For
- Dense open plan offices and call centres
- Budget conscious corporate fit outs
- Importers building an entry to mid price programme
Problems It Solves
- Chairs too wide for tightly spaced workstations
- Entry programmes with no matching visitor chair
- Base diameter unpublished on budget models
Application Scenarios
- High density open plan floors
- Call centres and data entry rooms
- Meeting rooms with the sled base version
How This Chair Is Built
Construction notes carried over from the original factory specification for model DLS-2205M.
Upholstered with mesh on back
Upholstered with fabric on the seat, high quality foam
Fixed arms
Swivel tilt mechanism 320MM nylon base
Nylon casters
Specification Sheet For Model DLS-2205M
These are the figures we quote from. If a line matters to your tender we can put it on letterhead.
| Model No | DLS-2205M |
|---|---|
| Armrest | Fixed PP arms |
| Mechanism | Swivel tilt mechanism |
| Gas Lift | Class 3 |
| Base | 300MM nylon base |
| Casters | Nylon casters |
| Product Size | W60*D62*H112.5-117.5CM |
| Packing | 2pcs/ctn |
| Carton Size | W65*D61*H61CM |
| Package CBM | 0.242 |
Customisation Options
- Mesh and fabric colourways
- Sled base finish
- Carton marks and private label packaging
Use And Care Guide
Measure workstation pitch before ordering, since this model is chosen for tight layouts.
Set the tilt tension for the heaviest regular user.
Inspect the 300MM base arms every six months in multi shift use.
How It Compares
| Against the 2215 series | A 300MM base and a smaller footprint, which suits dense layouts and a lower price point. |
|---|
Other Models In This Family
Office Furniture Manufacturer Middle Back Mesh Task Visitor Office Chair
View Specification
Office Furniture Manufacturer High Back Mesh Executive Office Chair
View Specification
Office Furniture Ergonomic Modern Fabric Office Executive Mesh Chair
View Specification
Office Furniture Guangzhou Ergonomic Modern Fabric Office Task Visitore Chair
View Specification
Guides Related To This Model
How To Read An Office Chair Specification Sheet
Six lines decide whether a chair survives three years of daily use. Here is what each one means and what to ask when it is missing.
Comparison ArticleMesh Or Leather Office Chairs For Your Market
The choice is usually decided by climate, shipping cost and who signs off the purchase, not by comfort.
Process GuideOffice Chair Mechanisms Explained
Swivel tilt, three position locking, multi-functional, synchronised, self loading and Donati. What each one does and where it belongs.
Questions About Model DLS-2205M
Is a 300MM base large enough for daily office use?
It is appropriate for the middle back task version in normal office use. For heavier users or supervisor positions we would point you at the 340MM base models in the 2210 or 2323 series.
How is model DLS-2205M packed for shipping?
It is packed 2pcs/ctn in a carton of W65*D61*H61CM, which works out at 0.242 CBM per carton. Send your quantity and we will confirm the carton count and total volume.
Which gas lift is fitted to this model?
This model is specified with a Class 3 gas lift. The 41 series description on our old catalogue notes that gas lifts are supplied with an SGS certificate, and we can supply the certificate for your shipment on request.
Can the colour and upholstery be changed on this model?
Yes. Upholstery colour, armrest type and base finish are changed on our own line. Injection moulding, hardware and assembly are all in house, which is why sample lead time stays at 7 days.
What is the minimum order quantity for this model?
Minimum order quantity depends on the colourway and on whether you need customisation. Send the model code and the quantity you have in mind and we will confirm the minimum for that combination.
How long does production take after the order is confirmed?
Mass production runs 30 days. A sample of this model can be produced in 7 days if you want to check it before committing.
Request A Quotation For Office Furniture Manufacturer Middle Back Mesh Task Office C
Send the quantity and destination port. You get FOB price minimum order quantity carton count and total CBM.