Middle Back Task Computer Home Office Chair Mesh Swivel Office Visitor Chair with Footrest - Grey Mesh Chromed Base
Model DLS-2204B in the grey mesh chromed base finish. A middle back mesh chair with a footrest on a 340MM nylon base, at 113 to 123 cm overall height. This is the middle back version, the workstation chair of the series, sized to clear a low partition without a headrest. The catalogue lists this one for home office use as a task, visitor, computer and swivel chair. Product size W64*D67*H113-123CM, packed 2pcs/ctn, in a W87*D46*H64CM carton, at 0.256 CBM.
- Mechanism: Swivel tilt mechanism
- Base: 340MM nylon base
- Gas Lift: Class 3
- Armrest: Fixed PP arms
- Product Size: W64*D67*H113-123CM
What This Model Gives You
- Integrated footrest
- Swivel tilt mechanism with Class 3 gas lift
- Two pieces per carton at 0.256 CBM
- 340MM nylon base on this version
- Fixed PP arms
- 340MM nylon base with nylon casters
- Supplied with a class 3 gas lift on model DLS-2204B
Who It Is For
- Home office and gaming retail programmes
- E-commerce reclining chair listings
- Small office comfort positions
Problems It Solves
- Reclining chairs built on undersized bases
- Footrest models with no published carton data
- Home office chairs that cannot recline far enough to rest
Application Scenarios
- Home offices and study rooms
- Gaming and streaming desks
- Manager positions in small offices
How This Chair Is Built
Construction notes carried over from the original factory specification for model DLS-2204B.
Upholstered with mesh on back
Upholstered with fabric on the seat, high quality foam
Fixed arms
Swivel tilt mechanism, wire control tilt locking for backrest. 350MM chromed base
Nylon casters
With footrest
Specification Sheet For Model DLS-2204B
These are the figures we quote from. If a line matters to your tender we can put it on letterhead.
| Model No | DLS-2204B |
|---|---|
| Armrest | Fixed PP arms |
| Mechanism | Swivel tilt mechanism |
| Gas Lift | Class 3 |
| Base | 340MM nylon base |
| Casters | Nylon casters |
| Product Size | W64*D67*H113-123CM |
| Packing | 2pcs/ctn |
| Carton Size | W87*D46*H64CM |
| Package CBM | 0.256 |
Customisation Options
- Mesh colourways including grey and black
- Nylon or chromed base finish
- Retail ready packaging
Use And Care Guide
Recline before extending the footrest.
Check the base fixings after the first month of use.
Keep the footrest mechanism clear of cables under the desk.
How It Compares
| Against the 2207 series | A taller frame at 113 to 123 cm, on the same 340MM base. |
|---|
Other Models In This Family
Middle Back Task Computer Home Office Chair Mesh Swivel Office Visitor Chair with Footrest - Black Mesh Chromed Base
View Specification
Office Furniture Ergonomic Modern Fabric Office Executive Mesh Chair
View Specification
Office Furniture Guangzhou Ergonomic Modern Fabric Office Task Visitore Chair
View Specification
Office Furniture Guangzhou Ergonomic Modern Fabric Office Task Computer Chair
View Specification
Guides Related To This Model
How To Read An Office Chair Specification Sheet
Six lines decide whether a chair survives three years of daily use. Here is what each one means and what to ask when it is missing.
Comparison ArticleMesh Or Leather Office Chairs For Your Market
The choice is usually decided by climate, shipping cost and who signs off the purchase, not by comfort.
Process GuideOffice Chair Mechanisms Explained
Swivel tilt, three position locking, multi-functional, synchronised, self loading and Donati. What each one does and where it belongs.
Questions About Model DLS-2204B
How much room does the footrest need behind the desk?
Allow roughly 40 cm of clear floor in front of the chair when the footrest is extended. Send us your layout if you are fitting a tight home office.
How is model DLS-2204B packed for shipping?
It is packed 2pcs/ctn in a carton of W87*D46*H64CM, which works out at 0.256 CBM per carton. Send your quantity and we will confirm the carton count and total volume.
Which gas lift is fitted to this model?
This model is specified with a Class 3 gas lift. The 41 series description on our old catalogue notes that gas lifts are supplied with an SGS certificate, and we can supply the certificate for your shipment on request.
Can the colour and upholstery be changed on this model?
Yes. Upholstery colour, armrest type and base finish are changed on our own line. Injection moulding, hardware and assembly are all in house, which is why sample lead time stays at 7 days.
What is the minimum order quantity for this model?
Minimum order quantity depends on the colourway and on whether you need customisation. Send the model code and the quantity you have in mind and we will confirm the minimum for that combination.
How long does production take after the order is confirmed?
Mass production runs 30 days. A sample of this model can be produced in 7 days if you want to check it before committing.
Request A Quotation For Middle Back Task Computer Home Office Chair Mesh Swivel Offi
Send the quantity and destination port. You get FOB price minimum order quantity carton count and total CBM.