Three Ply Tie On Face Mask
Pleated three layer disposable mask fitted with fabric ties instead of earloops.
- Product codeEVT-125
- GroupMedical Disposables
- Supply modelOEM and ODM against your drawing or material specification
- Manufactured inChina, exported through the London company
What EVT-125 Is
The tie on version of the pleated three layer mask. Fabric ties are knotted at the crown and the nape rather than looped over the ears, which gives a closer and adjustable fit and removes pressure from the ears over a long procedure. It is the specification theatre and long procedure staff usually prefer.
Why Buyers Choose This Code
- Adjustable fit that suits a wide range of face shapes
- No pressure on the ears during long procedures
- Ties stay secure when a mask has to be worn for hours
- Same three layer construction as the earloop version
Application Scenarios
- Operating theatres and procedure rooms
- Long duration clinical and laboratory work
- Staff who cannot tolerate earloop pressure
- Distributors stocking both fittings in one own brand range
Who It Is For
- Hospital and surgical buyers
- Clinics running long procedures
- Laboratories and research facilities
- Distributors who need both fittings under one specification
Problems It Solves
- Ear pain and skin damage after hours in earloop masks
- Loose masks on smaller or larger faces that earloops cannot correct
- Two suppliers used because one only offers one fitting
- Ties that pull out of the mask body under tension
How It Is Built
Three layer construction
Pleated body
Fabric ties at crown and nape
Formable nose piece
Tie attachment strength specified and tested
What Is Fixed And What Is Set Per Order
Dimensions, fabric counts, coating layers and packing were never published for this code. They are confirmed per order against an approved reference sample rather than guessed at here.
| Product Code | EVT-125 |
|---|---|
| Product Group | Medical Disposables |
| Product Type | Pleated three ply tie on face mask |
| Fitting | Fabric ties |
| Outer Face | Plain or printed to specification |
| Country of Manufacture | China |
| Supply Model | OEM and ODM against the buyer's drawing or material specification |
| Sizes and Colourways | Confirmed per order against an approved reference sample |
| Packing | Inner and outer counts agreed in writing before production |
Materials
- Nonwoven outer and inner layers
- Filter layer specified per order and per destination market
- Tie tape and nose piece specified at sampling
How The Order Runs
- SpecificationLayer construction and tie specification are agreed in writing.
- FormingLayers are combined, pleated and the nose piece inserted.
- Tie AttachmentTies are attached and the attachment points reinforced.
- Inspection And PackingTie strength is tested and masks are packed to the agreed counts.
Quality Control
- Tie attachment strength tested on samples across the run
- Layer count verified on pulled samples
- Nose piece retention checked on finished masks
- Pack counts verified against the written specification
Certification
The factories behind this catalogue include plants registered to ISO 9001, and one certified to ISO / TS 16949 for automotive components. Those certificates are held by the manufacturing partners rather than by EVT Enterprise Ltd, and the current certificate for the line running your order is confirmed at the time of order.
Reference sample. Production for EVT-125 is checked against a retained physical sample held at the factory and at EVT, not against the photograph on this page.
What Can Be Changed
- Tie length and tape width
- Plain, coloured or printed outer face
- Sterile or non sterile presentation depending on the market
- Pack counts and carton labelling to the buyer's specification
EVT-125 Against The Alternatives
| Alternative | How it compares |
|---|---|
| The earloop mask EVT-123 | Earloops are quicker to fit and cheaper to make. Ties give a closer fit and are what long procedure staff ask for. |
| A visor or face shield | A shield protects against splash but does not filter. The two are used together rather than as alternatives. |
Getting The Best Out Of It
- Tie the upper pair at the crown and the lower pair at the nape
- Form the nose piece before tightening the ties
- Do not hang a used mask around the neck between procedures
- Replace when damp or when the ties have been retied repeatedly
EVT-125 Questions
Why choose ties over earloops?
Fit and comfort over long wear. Ties adjust to the face and take the pressure off the ears.
Is the filter layer the same as the earloop mask?
The construction can be identical. Both are specified per order, so tell us the standard you need and both fittings can be made to it.
Can these be supplied sterile?
Presentation is specified per order and per market. Tell us the requirement before sampling.
What are the ties made from?
Tie tape is specified at sampling along with the attachment method and the strength test.
Related Products
Three Ply Earloop Face Mask
Pleated three layer disposable mask with elastic earloops and a printed outer face.
View product
Nonwoven Surgical Cap
Bouffant nonwoven cap in blue, photographed with a white nonwoven strip cap.
View product
Latex Finger Cots
Natural latex finger cots in a size range, for protecting a single digit rather than the whole hand.
View productRelated Guides
Nonwoven Materials In Medical Disposables
How nonwoven fabrics are made, what the layers in a three ply mask actually do, and which specification points to fix before a disposables order is placed.
Read the guide
Importing Housewares From China A Buyer's Checklist
A working checklist for an import programme: specification, sampling, production, inspection, packing, documents and the reorder, with the traps at each stage.
Read the guideQuote EVT-125
Send the quantity, the destination market and any drawing or competitor sample you already have. That is enough for a working quotation.