Cargo Trucks

China Dry Bulk Cement Powder Truck

A 6x4 dry bulk cement powder truck built around the WD615.69 turbocharged six-cylinder diesel, rated 336HP and paired with the HW19710 ten-speed gearbox. The A7-W cab includes a single bed and air conditioning, with a 70° hydraulically tillable tank. It is configured for 35000kg payload and is suited for domestic or regional cement delivery where quick discharge is needed.

Condition New
Drive Wheel 6x4
Dimensions L x W x H 11000x2496x 3900 mm
Wheelbase 5225+1350 mm
Wheel Track Front/Rear 2022/1830 mm

Ask for a Price on WhatsApp Email the Specification

Stock number held for this listing: 10041

White Sinotruk 6x4 cement powder truck, side view

Key Benefits

What This Unit Does Well

WD615.69 engine is a common SINOTRUK powerplant, easing sourcing of filters and injectors
HW19710 ten-forward-gear box provides usable ratios for loaded and unloaded operation
30,000-litre tank capacity reduces the number of return trips to the cement plant
Hydraulic tipping allows rapid discharge of cement powder at construction sites
25000kg tare weight allows for a 35000kg payload capacity
12R22.5 tubeless tyres are a standard size for availability and cost

Application Scenarios

Where It Is Used

Delivery of cement powder to construction sites with limited on-site storage
Transport of dry bulk materials to remote locations with poor road access
Hauling cement from the plant to precast concrete factories
Regional distribution of cement powder to building material suppliers

Fit

Who It Is For

Construction companies with their own transport fleets
Cement plants needing to deliver directly to customers
Logistics companies specialising in dry bulk transport
Building material suppliers requiring a reliable cement delivery service

Buyer Pain

Problems It Solves

Delays caused by slow manual unloading of cement powder
High transport costs due to frequent trips with smaller loads
Damage to cement during loading and unloading
Uncertainty over tank volume and discharge rate specifications

Engineering

Technical Features

WD615.69 water-cooled four-stroke six-cylinder in-line engine with turbocharging and intercooling
Direct injection diesel fuel system rated to Euro II emission
HW19710 manual transmission with ten forward gears and two reverse
ZF 8098 power steering system
9000kg front axle and 2x16000kg rear axles in 6x4 drive layout
70° hydraulically tillable 30,000-litre cement tank

Specification

Specification Table for This Listing

Taken from the supplier specification we hold. Anything not listed here is confirmed in writing before order rather than assumed.

Specification of China Dry Bulk Cement Powder Truck
Condition	New
Drive Wheel	6x4
Dimensions L x W x H	11000x2496x 3900 mm
Wheelbase	5225+1350 mm
Wheel Track Front/Rear	2022/1830 mm
Tare Weight	25000 kg
Payload	35000 kg
Front Axle Load	1x9000 kg
Rear Axle Load	2x16000 kg
Max. Driving Speed	90 km/h
Engine Model	WD615.69
Horse Power	336 HP
Emission	Euro II
Gearbox	HW19710, 10 forward / 2 reverse
Steering Gear	ZF 8098
Fuel Tank Capacity	400 L
Tyre	12R22.5 All tubeless, 11 pieces
Tank Volume	30,000 L
Working Pressure	0.2 Mpa
Horizontal Discharging Distance	25,000 mm
Vertical Discharging Distance	5,000 mm
Air Compressor	WB-10/2, Made in China, 8M3
Transmission Type	Manual
Fuel Type	Diesel
Place of Origin	Shandong, China (Mainland)

Materials

Materials and Build

Welded steel ladder frame chassis
Steel cab shell with factory paint finish
Cast steel front and rear axle housings
12R22.5 radial tubeless tyres on steel rims
Steel cement tank with hydraulic tipping mechanism

Process

How an Order Is Handled

You specify the cement density and discharge point height
We match the chassis code and axle ratio to your route and payload
You confirm the final specification sheet including colour and tank fittings
Unit is prepared, photographed and video recorded before loading
We book RoRo or container shipment and issue the export documents

Quality Control

Checks Before Loading

Chassis, engine and gearbox numbers are photographed and matched to your approved specification
Engine start, gear engagement and hydraulic tipping are recorded on video
Paint, glass and cab trim are checked for transport damage at the loading port
Loading and lashing photos are sent before the vessel departs

Customisation

What Can Be Changed

Cab colour other than the default
Different air compressor capacity
Alternative tyre brands
Additional tool box or storage compartment
Custom painting of the cement tank

Honest Comparison

How It Compares With the Alternatives

Rigid 6x4 cement truck	The tractor-head configuration allows the tank to be swapped for other trailers
Pneumatic cement tanker	Hydraulic tipping is simpler and less prone to blockage than pneumatic discharge

Use Guide

Using It Well

Check tyre pressure before each trip, especially on construction sites
Inspect the hydraulic tipping mechanism for leaks and wear
Use only the recommended cement additives to prevent tank corrosion

Photographs

More Views of This Unit

Photographs held for this listing. Current yard photographs of the specific unit you shortlist are taken fresh before any balance is paid.

Rear view of the cement tanker showing the discharge chute

Close-up of the hydraulic tipping mechanism

The cab interior with single bed and air conditioning

Engine bay showing the WD615.69 diesel engine

The 30,000L cement tank with access ladder

Source Specification

Manufacturer Text We Hold for This Listing

China dry bulk cement powder truck Cabin Driving type 6x4 LHD A7-W cab, with one bed and air condition, 70°hydraulically tillable to the front. Vehicle Main Dimensions Overall dimensions (L x W x H)mm 11000x2496x 3900 Wheel base (mm) 5225+1350 Wheel track (front/rear) (mm) 2022/1830 Weight in KGS Tare Weight 25000 payload 35000 Front axles loading capacity 1x9000 Rear axles loading capacity 2x16000 Max. driving speed ( km/h ) 90 Engine Brand SINOTRUK Model WD615.69 Type 4-stroke direct injection, 6-cylinder in-line with water cooling, turbo-charging and inter-cooling Horse Power(HP) 336 HP Emission standard Euro II Gearbox HW19710, 10-speed forward and 2 reverse gear Clutch Reinforced diaphragm clutch, diameter 430mm Steering Gear ZF 8098,power steering, hydraulic steering with power assistance Oil tank 400 liters Tire 12R22.5 All tubelessTyre, 11 pieces including one spare tire Tank spe

Reproduced from the supplier specification. Figures are confirmed in writing on the proforma invoice before any deposit.

Related Listings