Truck trailer machinery and parts exporter since 2008
Cargo Trucks

Dongfeng Use 12ton Box Truck Left Hand Drive Single Row Van Light Truck Small 4x2 Lorry Cargo Truck for Sale

A 4x2 Dongfeng light cargo truck with a single-row van body, left-hand drive, and a 12-ton payload capacity. Built around a petrol/gasoline engine under 150HP, it features a 3600x1400x1715mm cargo box, manual transmission, and Euro 2 emission standard. Designed for urban and regional delivery in markets where small, reliable vans are needed for daily logistics.

  • Condition New
  • Size 3600x1400x1715mm
  • Horsepower <150hp
  • Truck Model Dongfeng 12ton Box Tru
  • Drive Wheel 4x2

Stock number held for this listing: 11506-1-1-1-1-1-1-1-2

Front three-quarter view of a white Dongfeng 12ton box truck with left-hand drive and single-row van body
Front three-quarter view of a white Dongfeng 12ton box truck with left-hand drive and single-row van body
Key Benefits

What This Unit Does Well

  • Single-row van body maximises cargo space in tight urban routes with minimal turning radius
  • Left-hand drive configuration meets registration requirements in most Commonwealth and Middle Eastern markets
  • Petrol/gasoline engine avoids diesel fuel infrastructure needs in remote or low-infrastructure areas
  • Under 150HP engine reduces insurance and licensing costs in countries with tiered vehicle taxation
  • Euro 2 compliance allows entry into markets where higher emission standards are not enforced
Application Scenarios

Where It Is Used

  • Daily delivery of spare parts and tools to construction sites in urban or semi-urban zones
  • Last-mile distribution of consumer goods in Southeast Asia and Africa with limited road access
  • Mobile repair and maintenance service units operating on unpaved access roads
  • Small-scale freight transport between warehouses and retail outlets in congested city centres
Fit

Who It Is For

  • Fleet owners managing small urban delivery routes with limited vehicle budgets
  • Contractors needing a reliable, low-maintenance van for site logistics and tool transport
  • Parts distributors stocking light trucks for resale in African and South American markets
  • Government agencies procuring low-cost cargo vehicles for local service units
Buyer Pain

Problems It Solves

  • High cost and long lead time for imported light commercial vehicles from Europe or Japan
  • Lack of spare parts availability for foreign-branded vans in remote regions
  • Inflexible vehicle configurations that don't match local road conditions or loading practices
  • Uncertainty over emission compliance when importing into countries with variable standards
Engineering

Technical Features

  • 4x2 drive layout with single-row van body and left-hand drive
  • Petrol/gasoline engine with displacement under 4L and power under 150HP
  • Manual transmission with standard gear shift operation
  • Euro 2 emission standard compliance
  • Cargo box dimensions: 3600 x 1400 x 1715 mm
  • Chassis and body constructed from welded steel with factory paint finish
Specification

Specification Table for This Listing

Taken from the supplier specification we hold. Anything not listed here is confirmed in writing before order rather than assumed.

Specification of Dongfeng Use 12ton Box Truck Left Hand Drive Single Row Van Light Truck Small 4x2 Lorry Cargo Truck for Sale
ConditionNew
Size3600x1400x1715mm
Horsepower<150hp
Truck ModelDongfeng 12ton Box Truck
Drive Wheel4x2
Dimensions L x W x H Cargo Box3600 x 1400 x 1715 mm
Payload Capacity1 - 10 T
Engine TypePetrol / Gasoline
Engine Displacement< 4L
Transmission TypeManual
Emission StandardEuro 2
Fuel TypePetrol / Gasoline
Cab ConfigurationSingle row van
Drive SideLeft hand drive
Place of OriginShandong, China (Mainland)
Brand NameSinotruk
Capacity (Load)1 - 10t
Gasoline Engine Capacity< 4L
Gross Vehicle Weight760
Materials

Materials and Build

  • Welded steel chassis and frame with factory primer and paint
  • Steel van body with riveted or bolted panel joints
  • Petrol engine block and cylinder head in cast iron
  • Manual gearbox with steel gears and alloy shafts
  • Steel wheels with painted rims and rubber tyres
Process

How an Order Is Handled

  • You confirm the vehicle configuration, including cab layout, drive side, and delivery location
  • We check current stock or production schedule and confirm lead time in writing
  • You place a deposit and we issue a proforma invoice with full specification
  • Unit is prepared, photographed, and video recorded before loading
  • We book shipment via nude or waxed transport and provide tracking and export documents
Quality Control

Checks Before Loading

  • Engine start, gear engagement, and brake function are tested and recorded on video
  • Paint, glass, and body panels are checked for damage before loading
  • Chassis number and engine number are matched to the specification sheet
Customisation

What Can Be Changed

  • Left-hand or right-hand drive as per local registration rules
  • Van body colour change from standard white to another factory-available colour
  • Additional tool box or roof rack installation
  • Tyre brand or size change within standard 1400mm width range
  • Optional fifth wheel or towing bracket for future conversion
Honest Comparison

How It Compares With the Alternatives

4x4 light truckThe 4x2 is lighter and cheaper to run on paved roads, but lacks off-road capability
Diesel-powered light truckPetrol engine has lower initial cost and simpler maintenance, but higher fuel cost over time
Use Guide

Using It Well

  • Check oil and coolant levels before each shift, especially in hot climates
  • Use only factory-recommended spark plugs and air filters to maintain emission compliance
  • Keep the fuel tank topped up in high-temperature areas to prevent vapor lock
Photographs

More Views of This Unit

Photographs held for this listing. Current yard photographs of the specific unit you shortlist are taken fresh before any balance is paid.

Source Specification

Manufacturer Text We Hold for This Listing

Dongfeng use 12ton box truck left hand drive Single row van light truck small 4x2 lorry Cargo truck for sale Production Process Packaging & Shipping Package: In nude Shipping:within 45 days after receiving the T/T,allowing partial shipments and transshipment. Company Information WE are doing all series of truck, including Dump truck, Tractor truck, Cargo truck, Concrete mixer and pump truck, Van truck, Semi-trailer truck, Tank truck, Dangerous goods transfer truck, Environment sanitation truck, Road maintenance truck, Fire-extinguishing truck, Aerial platform truck, Wrecker truck, Oil field truck, Vehicles for animal husbandry, Truck crane, New energy series, HIAB crane and etc. Our company was mainly doing all construction machine spare parts, through all staff 'effort and government`s support, We has quickly developed and expansion into overseas market.Now as a special spare parts and

Reproduced from the supplier specification. Figures are confirmed in writing on the proforma invoice before any deposit.

Related Listings

Other Cargo Trucks Buyers Compare With This

All 56 Cargo Trucks Full product index

Buyer Questions

Questions About This Unit

What is the minimum order quantity

One unit is the minimum order. We welcome both single-unit buyers and dealerships.

What is the lead time

Units can be shipped within 45 days after receiving the T/T payment, with partial shipments allowed.

Can you supply spare parts for this truck

Yes. We supply common parts like filters, spark plugs, and brake components, and can consolidate them with the truck order.

How do you ship the truck

We ship in nude or with wax protection. We have long-term partnerships with shipping agents to offer competitive freight rates.

Can you make custom modifications

Yes. We can accommodate custom design requests to meet your specific operational needs.

Price This Unit Against Your Port

Send the destination and quantity. A written specification, landed cost and shipping option comes back.