Truck trailer machinery and parts exporter since 2008
Cargo Trucks

Rear Loading Garbage Compactor Truck with Refuse Collection Truck

A 4x2 rear-loading garbage compactor truck built on the HOWO chassis with a Weichai diesel engine, manual transmission, and Euro 4 emission standard. The 20-ton loading capacity unit features a fully sealed waste tank with a slop tank to contain wastewater from compaction, reducing secondary pollution. It uses a computer-controlled hydraulic system for automated loading and unloading, with dual manual and automatic operation modes for safety and reliability. The 12.00R20 tyres and 4350+1350 mm wheelbase support stable operation on urban and rough municipal routes.

  • Condition New
  • Truck Model HOWO
  • Drive Wheel 4x2
  • Dimensions L x W x H 10510 x 2550 x 3520 mm
  • Wheelbase 4350+1350 mm

Stock number held for this listing: 10077-1-2-1-2

Rear-loading garbage compactor truck parked on a yard, rear view showing compaction mechanism and dumping gear
Rear-loading garbage compactor truck parked on a yard, rear view showing compaction mechanism and dumping gear
Key Benefits

What This Unit Does Well

  • Fully sealed tank and slop tank prevent leakage and secondary pollution during transport
  • Computer-controlled automation allows one driver to manage loading and unloading
  • Dual operation modes (automatic and manual) provide backup in case of system failure
  • High compaction ratio allows twice the payload of non-compacting trucks of similar weight
  • Weichai engine and imported hydraulic components ensure reliable performance under heavy use
  • Manual transmission offers predictable maintenance and lower repair complexity in remote areas
Application Scenarios

Where It Is Used

  • Daily waste collection in urban areas with narrow streets and frequent stops
  • Transfer of mixed municipal waste from residential zones to central disposal sites
  • Operation in coastal or humid regions where corrosion resistance and sealed systems are critical
  • Route-based collection where high payload per trip reduces fuel cost and vehicle count
  • Municipal fleet standardisation on a single chassis and engine family for spare parts
Fit

Who It Is For

  • Municipal waste departments needing reliable, low-maintenance compactor trucks
  • Contractors managing waste transport for construction or industrial sites
  • Private waste haulers operating in markets without strict emission enforcement
  • Fleet managers replacing older compactor trucks with automated, sealed units
  • Procurement teams sourcing trucks with local spare parts availability in Africa and Southeast Asia
Buyer Pain

Problems It Solves

  • Waste leakage and odour during transport due to open or poorly sealed tanks
  • High labour cost from manual loading and unloading in unautomated units
  • Frequent breakdowns from unsealed hydraulic systems in wet or dusty conditions
  • Inconsistent payload due to lack of compaction in non-compacting trucks
  • Lack of dual operation modes leading to downtime when automation fails
Engineering

Technical Features

  • Rear-loading mechanism with hydraulic compaction system and sealed waste tank
  • Weichai diesel engine with Euro 4 emission standard and manual transmission
  • Computer-controlled system for semi-automated and fully automated loading and unloading
  • Slop tank to collect wastewater from compaction process, preventing environmental contamination
  • Double insurance system with automatic and manual operation modes
  • 12.00R20 radial tyres on steel rims with 4350+1350 mm wheelbase for stability and load distribution
Specification

Specification Table for This Listing

Taken from the supplier specification we hold. Anything not listed here is confirmed in writing before order rather than assumed.

Specification of Rear Loading Garbage Compactor Truck with Refuse Collection Truck
ConditionNew
Truck ModelHOWO
Drive Wheel4x2
Dimensions L x W x H10510 x 2550 x 3520 mm
Wheelbase4350+1350 mm
Curb Weight25000 kg
Gross Vehicle Weight25000 kg
Engine ModelWeichai
HorsepowerNot specified
EmissionEuro 4
Fuel TypeDiesel
TransmissionManual
Loading Capacity20 ton
Compaction TypeRear loading with hydraulic compaction
Tank SealingFully sealed with slop tank for wastewater
Operation ModeAutomatic and manual dual mode
Tyre12.00R20
CabStandard single sleeper
Place of OriginShandong, China (Mainland)
Brand NameSinotruk
Certifications Stated by SupplierCCC
Transmission TypeManual
Emission StandardEuro 4
Model NumberHOWO
Materials

Materials and Build

  • Welded steel chassis with reinforced frame for compaction load
  • Sealed stainless steel or coated steel waste tank with slop tank integration
  • Hydraulic cylinders and valves from imported components for high pressure and sealing
  • 12.00R20 radial tyres on steel rims with reinforced sidewalls
  • Steel cab shell with factory paint finish, white by default
Process

How an Order Is Handled

  • You provide the route profile, waste type, and frequency of collection
  • We match a chassis code and axle ratio based on available stock or plant build schedule
  • You confirm the final specification sheet including colour, cab, tyre, and dumping gear before deposit
  • Unit is prepared, photographed, and video recorded before loading
  • We book RoRo or container shipment and issue export documents your customs needs
Quality Control

Checks Before Loading

  • Chassis, engine, and transmission numbers are photographed and matched to the specification sheet you approved
  • Hydraulic system pressure test and compaction cycle are recorded on video before loading
  • Tank seal integrity and slop tank connection are visually inspected at the loading port
  • Loading and lashing photos are sent before the vessel departs
Customisation

What Can Be Changed

  • Cab colour other than the default white
  • Sleeper layout, single or double bunk
  • Left hand or right hand drive as your registration requires
  • Tyre brand and spare wheel count
  • Dumping gear: garbage can or refuse hopper fixed to the dumping mechanism
Honest Comparison

How It Compares With the Alternatives

4x4 compactor truckThe 4x2 has lower fuel consumption and simpler maintenance, but lacks traction on muddy or unpaved routes
Euro 3 emission truckEuro 4 avoids future registration issues in markets with tightening rules, but may require more frequent filter changes
Front-loading compactorRear-loading allows faster loading in tight spaces but requires more precise positioning at collection points
Use Guide

Using It Well

  • Replace hydraulic oil and filters at intervals recommended for Weichai engines and imported components
  • Use both automatic and manual modes periodically to verify system redundancy
  • Keep spare hydraulic hoses and seals on hand to avoid downtime during peak collection periods
Photographs

More Views of This Unit

Photographs held for this listing. Current yard photographs of the specific unit you shortlist are taken fresh before any balance is paid.

Source Specification

Manufacturer Text We Hold for This Listing

Rear Loading Garbage Compactor Truck with Refuse Collection Truck Drive Wheel 6X4 Type Compactor Transmission Type Manual Emission Standard Euro 3 Fuel Type Diesel Size 10510*2550*3520 Gross Vehicle Weight 25000 Place of Origin China Hubei Brand Name SHACMAN Certification CCC Warranty 1 Year Video technical support, Online support Weight (KG) 25000kg Product name Compression Garbage Truck Chassis Brand DongFeng.FAW.Foton.Sino.JAC.Shacman Driving Type 4*2 Loading capacity 20ton Color Customer Requirements WHEELBASE 4350+1350 Tire 12.00R20 Transmission Manual Transmission Emission Euro3/4/5 Engine Weichai 1. The whole truck tank is sealed and the waste water come from the compression process will flow into the slop tank. At this point, our compactor trucks can solve the problem of secondary pollution when doing garbage transportation. 2. Our garbage compactor truck is made up of sealed gar

Reproduced from the supplier specification. Figures are confirmed in writing on the proforma invoice before any deposit.

Related Listings

Other Cargo Trucks Buyers Compare With This

All 56 Cargo Trucks Full product index

Buyer Questions

Questions About This Unit

Is this unit new or used

New. All units are brand new, with factory warranty and full documentation.

What is the lead time

Units in stock can be prepared within 7 days. Build-to-order units depend on the plant schedule, and we confirm a delivery date in writing with the proforma invoice.

Can you supply spare parts for this truck later

Yes. Weichai engine parts, hydraulic components, and compaction system parts are available and can be shipped with the truck or separately.

Do you ship by container or RoRo

Rear-loading compactors are typically shipped RoRo. Container shipment is possible but requires cab lowering and may affect clearance.

What documents do I get for customs

Commercial invoice, packing list, bill of lading, certificate of origin, and CCC certification as standard.

Price This Unit Against Your Port

Send the destination and quantity. A written specification, landed cost and shipping option comes back.