Truck trailer machinery and parts exporter since 2008
Concrete Mixer Trucks

High Performance Concrete Mixer Truck Specifications

A 6x4 concrete mixer truck with a WD615.87 six-cylinder diesel engine rated at 290HP, paired with the HW15710 ten-speed manual gearbox.

  • Condition New
  • Warranty 12Months
  • Cab HOWO70(nobed),withAir-
  • Color White
  • Transmission HW15710(10forward,2rev

Stock number held for this listing: 10246

Side view of the mixer truck highlighting the 1800+3000+1400mm wheelbase and 12.00R20 tyres
Side view of the mixer truck highlighting the 1800+3000+1400mm wheelbase and 12.00R20 tyres
Key Benefits

What This Unit Does Well

  • WD615.87 engine is widely used across Chinese heavy trucks, so filters, injectors and oil are readily available in key export markets
  • HW15710 10-speed gearbox provides stable gear ratios for both loaded hauls and empty returns on uneven terrain
  • 14m3 alloy steel drum with HG700 blade and T510 cylinder material ensures long wear life under abrasive concrete loads
  • Discharge residual rate of ≤0.5% reduces material waste and improves batching accuracy on site
  • 12.00R20 radial tyres offer better load capacity and longer tread life compared to bias-ply tyres on rough roads
  • Air-conditioned HOWO70 cab with no bed is standard for driver comfort during long shifts in hot climates
Application Scenarios

Where It Is Used

  • Concrete delivery to remote construction sites with unpaved access roads and no reliable fuel or spare parts supply
  • High-volume batching operations where low residual discharge ensures full load utilisation and cost control
  • Fleet expansion in markets where local maintenance support is limited and spare parts must be pre-ordered
  • Projects requiring consistent delivery schedules with minimal downtime due to mechanical failure
Fit

Who It Is For

  • Contractors managing multiple construction sites with inconsistent infrastructure and limited access to repair shops
  • Fleet owners replacing older mixers with a model that shares engine and transmission parts with other trucks in their fleet
  • Machinery dealers stocking mixers for resale in African and Middle Eastern markets where parts availability is a key concern
  • Government or engineering teams procuring reliable mixers for public works projects with strict delivery timelines
Buyer Pain

Problems It Solves

  • Mixers that fail due to poor drum wear resistance and high residual rates, leading to material loss and rework
  • Downtime caused by parts that are not stocked locally or take weeks to arrive from Europe or North America
  • Trucks with underpowered engines that struggle on loaded gradients or fail to maintain discharge speed
  • Inconsistent delivery schedules due to unreliable gearboxes or transmission failures on long hauls
Engineering

Technical Features

  • WD615.87 water-cooled six-cylinder inline diesel engine with turbocharging and intercooling
  • HW15710 manual transmission with ten forward gears and two reverse gears
  • HF9 front axle and HC16 rear axle in 6x4 drive layout
  • 14m3 alloy steel mixing drum with T510 cylinder, HG700 blade, and 8mm high-strength head material
  • Italy Bonfiglioli or Germany ZF reducer (pure import) for reliable drum rotation
  • American Sao or Germany Rexroth hydraulic system with pressure water supply
  • 500L water tank with pressure-fed cooling and feeding system
  • Left and right side and cab operation with 180° discharge range and height adjustment
  • Air brake system with directional assistance and leak receiving device
Specification

Specification Table for This Listing

Taken from the supplier specification we hold. Anything not listed here is confirmed in writing before order rather than assumed.

Specification of High Performance Concrete Mixer Truck Specifications
ConditionNew
Warranty12Months
CabHOWO70(nobed),withAir-condition
ColorWhite
TransmissionHW15710(10forward,2reverse)
Dimension(L*W*H)8222*2496*3048
Weight25000kg
CertificationISO9001,ISO/TS16949,CCC,
Tire12.00R20(Radial)
Power(W)290HP
EngineWD615.87
Drive Wheel6x4
Dimensions L x W x H unloaded8222 x 2496 x 3048 mm
Wheelbase1800+3000+1400 mm
Curb Weight25000 kg
Engine ModelWD615.87
Horsepower290 HP
Fuel TypeDiesel
Front AxleHF9
Rear AxleHC16
Tyre12.00R20 (Radial)
Gross Vehicle Weight25000 kg
Maximum Speed75 km/h
Mixer Volume14 m3
Discharge Residual Rate≤ 0.5%
Feeding Speed≥ 3 m3/min
Materials

Materials and Build

  • Alloy steel drum body with T510 cylinder and HG700 blade material
  • 8mm high-strength alloy steel head plate for drum end
  • Cast steel HF9 front and HC16 rear axle housings
  • 12.00R20 radial tyres on steel rims
  • Factory-painted white cab shell with air conditioning unit
Process

How an Order Is Handled

  • You provide the project location, site access conditions, and expected daily mix volume
  • You review the final spec sheet, including cab, tyre, and colour before deposit
  • Unit is prepared, engine tested, and drum rotation verified on video before loading
  • We book RoRo or container shipment and issue export documents including commercial invoice and bill of lading
Quality Control

Checks Before Loading

  • Chassis, engine, and gearbox numbers are photographed and matched to the approved specification sheet
  • Engine start, transmission engagement, and hydraulic drum rotation are recorded on video before loading
  • Drum welds, paint, glass, and cab trim are inspected for transport damage at the loading port
  • Loading and lashing photos are sent before the vessel departs
Customisation

What Can Be Changed

  • Cab colour other than white
  • Sleeper layout, single or double bunk (if available in stock)
  • Left hand or right hand drive as required by local registration
  • Tyre brand and spare wheel count
  • Additional water tank or tool box
  • Fifth wheel height adjustment for trailer compatibility
Honest Comparison

How It Compares With the Alternatives

4x2 mixer truckThe 6x4 handles heavier payloads on rough terrain but uses more fuel when running empty
Smaller 9m3 mixer14m3 unit reduces number of trips per day but requires more space for loading and storage
Use Guide

Using It Well

  • Inspect the drum blades and cylinder welds every 500 hours for signs of wear or cracking
  • Keep the water tank clean and the pressure system checked monthly to prevent clogging
  • Order the drum bearing set and hydraulic pump with the truck to avoid delays in the first service
Photographs

More Views of This Unit

Photographs held for this listing. Current yard photographs of the specific unit you shortlist are taken fresh before any balance is paid.

Source Specification

Manufacturer Text We Hold for This Listing

High performance concrete mixer truck specifications Now we have 10 units 6x4 mixer truck and dump truck ready for shipment, which were produced in 2015, price is very good. High performance concrete mixer truck specifications Product Description Product specification: Chassis parameters Name: 14-18 m3 mixer Truck model: Concrete mixer truck Engine: Cummins 360 horsepower Size: 1100x2495x3990mm gearbox Fast 9-speed gearbox Volume: 14m3 mixer Truck Front and rear bridges: 7.5Ton/16ton Total mass: 25000(KG) drive: (6x4) brake: Air brake Wheelbase: 1800+3000+1400 Turn to: Directional assistance axes: 3 Speed: 85(km/h) Number of tires: 12+1 Tires: 12.00-20(Steel tire) Tank parameter Tank body Alloy steel Cylinder material: T510; 6mm Alloy steel Blade material: HG700 Head material: High strength 8mm alloy steel Reducer: Italy Bonfiglioli / PMP, Germany ZF (pure import) Hydraulic system Americ

Reproduced from the supplier specification. Figures are confirmed in writing on the proforma invoice before any deposit.

Related Listings

Other Concrete Mixer Trucks Buyers Compare With This

All 30 Concrete Mixer Trucks Full product index

Buyer Questions

Questions About This Unit

Is this unit new or used

New. All units are brand new with 12-month warranty and are sourced directly from the manufacturer.

Can you supply spare parts for this truck later

Yes. WD615.87 filters, injectors, clutch parts, and drum components are among the most frequently shipped items and can be consolidated with the truck order.

Do you ship by container or RoRo

RoRo is standard for mixers. Container shipment is possible but requires lowering the cab and may affect clearance. We quote both options for landed cost comparison.

What documents do I get for customs

Commercial invoice, packing list, bill of lading, certificate of origin, and any pre-shipment inspection certificate your country requires.

Price This Unit Against Your Port

Send the destination and quantity. A written specification, landed cost and shipping option comes back.