Truck trailer machinery and parts exporter since 2008
Concrete Mixer Trucks

High Quality High Power ZZ1257N3847N Concrete Mixer Truck Price

A 6x4 Sinotruck ZZ1257N3847N concrete mixer truck with a WD615.47 turbocharged six-cylinder diesel engine rated at 371HP, paired with the HW19710 ten-speed manual transmission. It features an A7-W single sleeper cab, HF9 front axle and HC16 rear axle with a 5.73 ratio, and 12.00R20 radial tyres. This configuration is designed for heavy-duty construction site operations where consistent mixing and high payload capacity are required.

  • Condition New
  • Warranty 12Months
  • Cab A7-W,singlesleeper
  • Color white
  • Transmission HW19710(10Forward&2rev

Stock number held for this listing: 10230

White Sinotruck ZZ1257N3847N 6x4 concrete mixer truck parked on a yard, front three-quarter view
White Sinotruck ZZ1257N3847N 6x4 concrete mixer truck parked on a yard, front three-quarter view
Key Benefits

What This Unit Does Well

  • 371HP WD615.47 engine is the most commonly used powerplant in Sinotruck mixers, ensuring easy access to filters, injectors and service parts
  • HW19710 ten-speed gearbox provides strong low-end torque for loaded drum rotation and efficient cruising on haul roads
  • 21.44 cubic metre geometric drum volume allows for large batch sizes, reducing the number of trips needed per site
  • 14 cubic metre agitating capacity ensures full mixing performance with minimal residual material after discharge
  • 5.73 rear axle ratio is optimised for heavy loads and sustained drum rotation under full load
  • Single sleeper cab with air conditioning supports driver comfort during long shifts at construction sites
Application Scenarios

Where It Is Used

  • Concrete delivery to large infrastructure projects with limited access roads and tight scheduling
  • High-volume batching at central mixing plants with frequent dispatches to multiple job sites
  • Long hauls between batching plants and remote construction zones where downtime must be minimised
  • Operations in hot climates where air-conditioned cabs are essential for driver retention and safety
Fit

Who It Is For

  • Construction contractors managing multiple site deliveries with tight timelines
  • Fleet operators standardising on one engine and transmission family across their mixer and truck fleet
  • Machinery dealers stocking ready-to-ship mixers for resale in Africa, Southeast Asia and the Middle East
  • Government or engineering procurement teams requiring reliable, high-capacity mixers for public works
Buyer Pain

Problems It Solves

  • Mixed fleets with different engine models requiring separate filter, injector and clutch part inventories
  • Downtime caused by long lead times for spare parts when the original OEM is no longer supported
  • Inconsistent mixing performance due to underpowered engines or mismatched axle ratios
  • Uncertainty over exact chassis and axle codes when preparing import documentation or customs clearance
Engineering

Technical Features

  • WD615.47 water-cooled four-stroke six-cylinder in-line diesel engine with turbocharging
  • Direct injection fuel system with rated output of 371HP at 2200 rpm
  • HW19710 manual transmission with ten forward gears and two reverse gears
  • ZF8 118 steering system for responsive handling under load
  • HF9 front axle and HC16 rear axle in 6x4 drive layout with 5.73 gear ratio
  • 21.44 cubic metre geometric drum volume with 14 cubic metre agitating capacity
  • A7-W single sleeper cab with factory air conditioning and standard white paint finish
Specification

Specification Table for This Listing

Taken from the supplier specification we hold. Anything not listed here is confirmed in writing before order rather than assumed.

Specification of High Quality High Power ZZ1257N3847N Concrete Mixer Truck Price
ConditionNew
Warranty12Months
CabA7-W,singlesleeper
Colorwhite
TransmissionHW19710(10Forward&2reverse)
Dimension(L*W*H)9360*2496*3965
Weight25000kg
CertificationISO9001,ISO/TS16949,CCC,
Tire12.00R20Radialtyre
Power(W)371HP
EngineWD615.47
Truck ModelZZ1257N3847N
Drive Wheel6x4
Dimensions L x W x H unloaded9360 x 2496 x 3965 mm
Gross Vehicle Weight25000 kg
Engine ModelWD615.47
Horsepower371 HP
EmissionNot specified
Fuel TypeDiesel
Steering SystemZF8 118
Front AxleHF9
Rear AxleHC16
Axle Ratio5.73
Tyre12.00R20 Radial
Drum Volume Geometric21.44 m3
Drum Volume Agitating14 m3
Materials

Materials and Build

  • Welded steel ladder frame chassis in the ZZ1257 series
  • Steel drum shell with wear-resistant lining for high-volume concrete mixing
  • Cast steel HF9 front and HC16 rear axle housings
  • 12.00R20 radial tyres on steel rims with reinforced sidewalls
  • Steel cab shell with factory paint finish, white by default
Process

How an Order Is Handled

  • You provide the site location, typical load weight and frequency of use
  • We confirm the available stock units with matching chassis code, axle ratio and drum condition
  • You review the final specification sheet including cab, colour and tyre type before deposit
  • Unit is prepared, photographed and video recorded before loading
  • We book RoRo or container shipment and issue the export documents your customs needs
Quality Control

Checks Before Loading

  • Chassis, engine and gearbox numbers are photographed and matched to the specification sheet you approved
  • Engine start, transmission engagement and drum rotation are recorded on video before loading
  • Drum lining, cab trim and paint are checked for transport damage at the loading port
  • Loading and lashing photos are sent before the vessel departs
Customisation

What Can Be Changed

  • Cab colour other than the default white
  • Sleeper layout, single or double bunk
  • Left hand or right hand drive as your registration requires
  • Tyre brand and spare wheel count
  • Additional tool box or fifth wheel height adjustment
Honest Comparison

How It Compares With the Alternatives

4x2 mixer truckThe 6x4 provides better traction and axle load distribution for heavy concrete loads, but consumes more fuel when running empty
Smaller 10m3 drum model21.44m3 geometric volume reduces the number of trips needed per site, but requires more space for storage and handling
Use Guide

Using It Well

  • Keep the drum drive chain lubricated and check tension monthly, especially in dusty or wet conditions
Photographs

More Views of This Unit

Photographs held for this listing. Current yard photographs of the specific unit you shortlist are taken fresh before any balance is paid.

Source Specification

Manufacturer Text We Hold for This Listing

High quality high power ZZ1257N3847N concrete mixer truck price Now we have 10 units 6x4 mixer truck and dump truck ready for shipment, which were produced in 2015, price is very good. High quality high power ZZ1257N3847N concrete mixer truck price Product Description Product specification: Model Driving type Engine output Drum volume M3 ZZ1257N384 7N 6 X4 371 hp 10 MAIN SPECIFICATIONS Model ZZ1257N384 7N Steering ZF8 118 Engine Brand SINOTRUK Gross Vehicle Weight 25 000kg WD615.47 Kerb Weight 1 4015 kg Maximum Output 371 HP Tyres 12.00R20 Radial tyre Rated engine power (KW/r/min) 27 3 /2200 Cab A7-W single sleeper Air-condition Transmission HW1 9 710 (10Forward&2reverse) Maximum Speed 75 km/h Front Axle HF9 Geometric volume M3 21.44 Max.loading:9000kg Agitating capacity M3 14 Rear Axle HC16 Ratio:5.73 Discharging remain ration < 0.2% Max.loading:16000kg Overall Dimension ( mm ) 9360*249

Reproduced from the supplier specification. Figures are confirmed in writing on the proforma invoice before any deposit.

Related Listings

Other Concrete Mixer Trucks Buyers Compare With This

All 30 Concrete Mixer Trucks Full product index

Buyer Questions

Questions About This Unit

Is this unit new or used

The unit is new. It is not a used or reconditioned truck. The model is from 2015 production but has never been operated.

What is the lead time

Units in stock can be prepared and loaded within 45 days after receiving the T/T payment. We confirm the exact date in writing with the proforma invoice.

Can you supply spare parts for this truck later

Yes. WD615.47 filters, injectors, clutch parts, drum drive components and axle parts are available and can be consolidated with the truck order.

Do you ship by container or RoRo

The truck is shipped RoRo by default. Container shipment is possible but requires lowering the cab and may affect clearance.

What documents do I get for customs

Commercial invoice, packing list, bill of lading, certificate of origin, and any pre-shipment inspection certificate your country requires.

Price This Unit Against Your Port

Send the destination and quantity. A written specification, landed cost and shipping option comes back.