Truck trailer machinery and parts exporter since 2008
Concrete Mixer Trucks

Concrete Cement Mixer Truck Concrete Mixer Truck 6*4 for Sale

A 6x4 concrete mixer truck model ZZ1257N3841W with a WD615.69 turbocharged six-cylinder diesel engine rated at 336HP, paired with the HW15710 ten-speed manual transmission. The unit features a 10m3 agitator drum, HF9 front axle and HC16 rear axle, 12.00R20 radial tyres, and a single sleeper cab with air conditioning.

  • Condition New
  • Warranty 12Months
  • Cab HOWO76(singerbed),with
  • Color white
  • Transmission HW15710(10forward,2rev

Stock number held for this listing: 10239

White 6x4 concrete mixer truck parked on a yard, front three-quarter view showing the cab and drum
White 6x4 concrete mixer truck parked on a yard, front three-quarter view showing the cab and drum
Key Benefits

What This Unit Does Well

  • WD615.69 engine is widely used across Chinese construction fleets, so filters, injectors and oil are readily available in most markets
  • HW15710 transmission with ten forward gears offers smooth shifting under heavy load and consistent speed control during mixing cycles
  • 10m3 drum capacity matches the most common demand for urban concrete delivery and medium-scale construction projects
  • 336HP output provides sufficient torque for climbing gradients with a full drum, even in hot climates
  • Single sleeper cab with air conditioning supports driver comfort during long shifts on multi-stop delivery routes
  • 3200mm wheelbase balances stability during mixing and manoeuvrability in tight construction yards
Application Scenarios

Where It Is Used

  • Urban concrete delivery to high-rise construction sites with narrow access roads and frequent stops
  • Medium-distance haul from batching plant to roadwork zones where consistent mixing is critical
  • Site-to-site transport of ready-mix concrete where the truck must operate on unpaved access roads
  • Contractor fleets standardising on one engine and transmission type to reduce spare parts inventory
Fit

Who It Is For

  • Construction contractors needing reliable, locally supported mixer trucks for urban or regional projects
  • Fleet managers replacing older units with a proven engine and transmission combination
  • Machinery dealers stocking mixer trucks for resale in markets where spare parts availability is a concern
  • Government infrastructure teams procuring vehicles with predictable maintenance and repair cycles
Buyer Pain

Problems It Solves

  • Mixed fleets with different engine models requiring separate filter, injector and oil types
  • Downtime caused by long lead times for imported spare parts from Europe or North America
  • Underpowered trucks that cannot maintain drum rotation speed under full load or on inclines
  • Uncertainty over axle ratios and chassis codes when preparing import documentation or customs clearance
Engineering

Technical Features

  • WD615.69 water-cooled four-stroke six-cylinder in-line diesel engine with turbocharging
  • Direct injection fuel system with rated output of 336HP at 2200rpm
  • HW15710 manual transmission with ten forward gears and two reverse gears
  • ZF8098 steering system with power-assisted steering
  • TOPUNION P68 reducer and Italy ARK PV089 hydraulic pump for drum rotation
  • Italy ARK MF090 hydraulic motor driving the drum agitator
  • HF9 front axle and HC16 rear axle in 6x4 drive layout with 5.73 axle ratio
  • 10m3 agitator drum with 11° slope and discharging remainder ratio below 0.2%
  • Single sleeper cab with factory air conditioning and white paint finish
Specification

Specification Table for This Listing

Taken from the supplier specification we hold. Anything not listed here is confirmed in writing before order rather than assumed.

Specification of Concrete Cement Mixer Truck Concrete Mixer Truck 6*4 for Sale
ConditionNew
Warranty12Months
CabHOWO76(singerbed),withAir-condition
Colorwhite
TransmissionHW15710(10forward,2reverse)
Dimension(L*W*H)8560*2496*3048
Weight25000kg
CertificationISO9001,ISO/TS16949,CCC,
Tire12.00R20(Radial)
Power(W)336hp
EngineWD615.69
ModelZZ1257N3841W
Drive Type6x4
Dimensions L x W x H8560 x 2496 x 3048 mm
Wheelbase3200 mm
Gross Vehicle Weight25000 kg
Kerb Weight10580 kg
Engine ModelWD615.69
Horsepower336 HP
Engine Output247 kW at 2200 rpm
Front AxleHF9
Rear AxleHC16
Axle Ratio5.73
Drum Volume10 m3
Agitating Capacity10 m3
Discharging Remain Ratio< 0.2%
Materials

Materials and Build

  • Welded steel ladder frame chassis in the ZZ1257 series
  • Steel cab shell with factory paint finish, white by default
  • Cast steel HF9 front and HC16 rear axle housings
  • 12.00R20 radial tyres on steel rims
  • Stainless steel agitator drum with internal flighting for even mixing
Process

How an Order Is Handled

  • You provide the project location, typical route profile and expected daily operating hours
  • We confirm the availability of the ZZ1257N3841W model with the specified engine and transmission
  • You review the final specification sheet, including cab layout, tyre count and colour before deposit
  • Unit is prepared, photographed and video recorded before loading, with engine and drum tested
  • We book RoRo or container shipment and issue the export documents your customs needs
Quality Control

Checks Before Loading

  • Chassis, engine and transmission numbers are photographed and matched to the specification sheet you approved
  • Engine start, transmission engagement and drum rotation are recorded on video before loading
  • Paint, glass and cab trim are checked for transport damage at the loading port
  • Loading and lashing photos are sent before the vessel departs
Customisation

What Can Be Changed

  • Cab colour other than the default white
  • Sleeper layout, single or double bunk
  • Left hand or right hand drive as your registration requires
  • Tyre brand and spare wheel count
  • Additional tool box or fifth wheel height adjustment
Honest Comparison

How It Compares With the Alternatives

4x2 mixer truckThe 6x4 handles heavier payloads on uneven terrain but uses more fuel when running empty on paved roads
8m3 drum model10m3 capacity increases delivery volume per trip but requires more engine power and higher maintenance on long hauls
Use Guide

Using It Well

  • Inspect the hydraulic pump and motor seals monthly in dusty or wet environments
  • Keep the drum agitator motor and reducer lubricated according to the manufacturer's manual
  • Order the drum seal kit and hydraulic hoses with the truck to avoid delays in the first service
Photographs

More Views of This Unit

Photographs held for this listing. Current yard photographs of the specific unit you shortlist are taken fresh before any balance is paid.

Source Specification

Manufacturer Text We Hold for This Listing

concrete cement mixer truck concrete mixer truck 6*4 for sale Now we have 10 units 6x4 mixer truck and dump truck ready for shipment, which were produced in 2015, price is very good. concrete cement mixer truck 10m3 concrete mixer truck 6*4 for sale Product Description Product specification: Model Driving type Engine output Drum volume M3 ZZ1257N3841W 6X4 336hp 10 MAIN SPECIFICATIONS Model ZZ1257N3841W Steering ZF8098 Engine Brand new Gross Vehicle Weight 25000kg WD615.69 Kerb Weight 10580kg Maximum Output 336HP Tyres 12.00R20(Radial) Rated engine power (KW/r/min) 247/2200 Reducer TOPUNION P68 Pump Italy ARK PV089 Transmission HW15710(10forward,2reverse) Motor Italy ARK MF090 Front Axle HF9 Geometric volume M3 16.85 Max.loading:9000kg Agitating capacity 10 Rear Axle HC16 Ratio:5.73 Discharging remain ration <0.2 Max.loading:16000kg Cab singer bed Maximum Speed 75 km/h Air-condition Drum

Reproduced from the supplier specification. Figures are confirmed in writing on the proforma invoice before any deposit.

Related Listings

Other Concrete Mixer Trucks Buyers Compare With This

All 30 Concrete Mixer Trucks Full product index

Buyer Questions

Questions About This Unit

Is this unit new or used

The unit is new. The model and engine are current in production, and the truck is built to the latest specification with factory warranty.

Can you supply spare parts for this truck later

Yes. WD615.69 filters, injectors, clutch parts, axle components and hydraulic seals are the parts we ship most frequently and can be consolidated with the truck order.

Do you ship by container or RoRo

Mixer trucks are typically shipped RoRo. Container shipment is possible but requires lowering the cab and may affect clearance; we quote both options for landed cost comparison.

What documents do I get for customs

Commercial invoice, packing list, bill of lading, certificate of origin, and any pre-shipment inspection certificate your country requires.

Price This Unit Against Your Port

Send the destination and quantity. A written specification, landed cost and shipping option comes back.