Cargo Trucks
Dongfeng Use 12ton Box Truck Left Hand Drive Single Row Van Light Truck Small
- ConditionNew
- Size3600x1400x1715mm
- Horsepower<150hp
Cargo Trucks
10CBM Swing Arm Garbage Truck Skip Loader Refuse Truck for for Sale
A 4x2 HOWO swing arm garbage truck with a 10CBM sealed compaction body, powered by a Weichai diesel engine, manual transmission, and Euro 4 emission standard. Designed for municipal and industrial waste collection, it compacts refuse to double payload capacity and includes a slop tank to contain wastewater from compression, reducing secondary pollution.
- Condition New
- Truck Model HOWO
- Drive Wheel 4x2
- Dimensions L x W x H 10510 x 2550 x 3520 mm
- Wheelbase 4350+1350 mm
Stock number held for this listing: 10077-1-2
Key Benefits
What This Unit Does Well
- 10CBM sealed compaction tank holds twice the volume of non-compacting trucks of the same weight class
- Weichai engine with Euro 4 emission standard ensures compliance in markets requiring modern emissions
- Manual transmission offers predictable maintenance and lower repair cost in remote areas
- Slop tank captures wastewater from compaction, preventing leaks and secondary contamination
- Double insurance system with automatic and manual operation modes improves reliability during breakdowns
- Computer-controlled system allows full or partial automation, reducing driver workload on loading and unloading
Application Scenarios
Where It Is Used
- Municipal waste collection in cities with narrow streets and limited access to landfill sites
- Industrial site waste transport where high compaction reduces the number of trips needed
- Remote construction or mining camps where waste must be stored and transported without spillage
- Urban areas with strict environmental regulations requiring sealed waste transport and no secondary pollution
Fit
Who It Is For
- Municipal waste management departments sourcing cost-effective, high-capacity refuse trucks
- Contractors managing large-scale construction or industrial projects needing reliable waste transport
- Private waste haulers operating in markets where compaction reduces fuel and labour costs
- Procurement teams importing trucks to regions with limited access to spare parts and technical support
Buyer Pain
Problems It Solves
- Frequent trips caused by low payload capacity in non-compacting trucks increases fuel and labour cost
- Waste leakage and odour during transport due to open or poorly sealed bodies in older models
- Secondary pollution from wastewater escaping during compaction in unsealed systems
- High downtime from complex manual loading processes requiring multiple workers
- Lack of backup operation mode when electronic controls fail in remote locations
Engineering
Technical Features
- 10CBM sealed compaction body with slop tank for wastewater containment
- Weichai diesel engine with Euro 4 emission standard
- Manual transmission with gear shift lever and clutch system
- 4350+1350mm wheelbase for stability and turning radius balance
- 12.00R20 tyres on steel rims for durability on rough roads
- Computer-controlled compaction system with automatic and manual operation modes
- Hydraulic system with imported components for high pressure and reliable sealing
- Swing arm loader with adjustable arm reach for loading from standard 20-ton skip bins
- Double insurance system: automatic mode with manual override for safety and continuity
Specification
Specification Table for This Listing
Taken from the supplier specification we hold. Anything not listed here is confirmed in writing before order rather than assumed.
| Condition | New |
|---|---|
| Truck Model | HOWO |
| Drive Wheel | 4x2 |
| Dimensions L x W x H | 10510 x 2550 x 3520 mm |
| Wheelbase | 4350+1350 mm |
| Curb Weight | 25000 kg |
| Gross Vehicle Weight | 25000 kg |
| Engine Model | Weichai |
| Emission Standard | Euro 4 |
| Fuel Type | Diesel |
| Transmission Type | Manual |
| Loading Capacity | 20 ton |
| Compaction Volume | 10CBM |
| Body Type | Swing Arm Garbage Truck |
| Chassis Brand | DongFeng, FAW, Foton, Sino, JAC, Shacman |
| Tyre Size | 12.00R20 |
| Cab Type | Single sleeper (standard) |
| Dumping Gear | Skip loader or refuse hopper |
| Certifications Stated by Supplier | CCC |
| Place of Origin | Shandong, China (Mainland) |
| Brand Name | Sinotruk |
| Model Number | HOWO |
Materials
Materials and Build
- Galvanised steel compaction body with welded seams and sealed joints
- Cast steel frame for swing arm and loading mechanism
- Hydraulic cylinders and valves made from imported high-pressure components
- Steel chassis frame from DongFeng, FAW, Foton, Sino, JAC or Shacman
- 12.00R20 radial tyres on steel rims with reinforced sidewalls
- Slop tank made from corrosion-resistant steel with internal drainage
Process
How an Order Is Handled
- You send the waste type, route conditions, and required loading method (skip or hopper)
- We confirm the chassis brand and engine model available in stock or from the plant
- You approve the final spec sheet including colour, cab type, and dumping gear before deposit
- Unit is prepared, tested, and photographed with video of compaction and hydraulic operation
- We book RoRo or container shipment and provide export documents for customs clearance
Quality Control
Checks Before Loading
- Chassis, engine, and transmission numbers are photographed and matched to the approved spec sheet
- Hydraulic system and compaction cycle are tested and recorded on video before loading
- Seal integrity of the compaction body and slop tank is checked under pressure
- Paint, glass, and cab trim are inspected for damage at the loading port
Customisation
What Can Be Changed
- Cab colour other than standard white
- Single or double sleeper cab configuration
- Left or right hand drive as required by local registration
- Skip loader or refuse hopper as the primary dumping gear
- Additional tool box, spare wheel, or fifth wheel height adjustment
Honest Comparison
How It Compares With the Alternatives
| 4x2 non-compacting garbage truck | The 10CBM compactor carries twice the waste volume per trip, reducing fuel and labour costs despite higher initial price |
|---|---|
| Euro 3 emission truck | Euro 4 avoids restrictions in markets with stricter emissions rules but may require more frequent maintenance on older diesel systems |
| Automatic compaction system | Manual transmission is simpler to repair in remote areas but requires more driver input during loading and unloading |
Use Guide
Using It Well
- Replace hydraulic oil and filters at intervals recommended for Weichai engines, not on a generic schedule
- Inspect the slop tank seal and drainage pipe after each use in high-humidity environments
- Use manual override mode if the computer control system fails during loading to avoid downtime
- Keep spare hydraulic hoses and seals on hand for quick repairs in the field
Photographs
More Views of This Unit
Photographs held for this listing. Current yard photographs of the specific unit you shortlist are taken fresh before any balance is paid.
Source Specification
Manufacturer Text We Hold for This Listing
10CBM Swing Arm Garbage Truck Skip Loader Refuse Truck for for sale Drive Wheel 4X2 Type Compactor Transmission Type Manual Emission Standard Euro 3 Fuel Type Diesel Size 10510*2550*3520 Gross Vehicle Weight 25000 Place of Origin China Hubei Brand Name SHACMAN Certification CCC Warranty 1 Year Video technical support, Online support Weight (KG) 25000kg Product name Compression Garbage Truck Chassis Brand DongFeng.FAW.Foton.Sino.JAC.Shacman Driving Type 4*2 Loading capacity 20ton Color Customer Requirements WHEELBASE 4350+1350 Tire 12.00R20 Transmission Manual Transmission Emission Euro3/4/5 Engine Weichai 1. The whole truck tank is sealed and the waste water come from the compression process will flow into the slop tank. At this point, our compactor trucks can solve the problem of secondary pollution when doing garbage transportation. 2. Our garbage compactor truck is made up of sealed g
Reproduced from the supplier specification. Figures are confirmed in writing on the proforma invoice before any deposit.
Related Listings
Other Cargo Trucks Buyers Compare With This
Cargo Trucks
NEW! China Compressed Type Garbage Truck 6x4 16m3 Garbage Compactor Truck
- ConditionNew
- Truck Model6x4 Compressed Type Garbag
- Drive Wheel6x4
Cargo Trucks
16Ton Chinese 4x2 Hook Lift Garbage Truck
- ConditionNew
- Truck ModelHOWO
- Drive Wheel4x2
Cargo Trucks
Durable and Long Service Life 18CBM+2 Garbage Compression Truck
- ConditionNew
- Truck ModelHOWO
- Drive Wheel4x2
Cargo Trucks
10cbm Garbage Container Truck 6 Wheelers Swing Arm Garbage Truck
- ConditionNew
- Truck Model10cbm garbage container tr
- Drive Wheel4x2
Cargo Trucks
3 Ton 8 Tons China Waste Truck Container Garbage Truck
- ConditionNew
- Truck ModelHOWO
- Drive Wheel4x2
Buyer Questions
Questions About This Unit
Is this truck new or used
All units are new. We confirm the chassis number and engine hours before shipment.
What is the lead time
Units in stock can be loaded within 10 days. Custom builds depend on the plant schedule and are confirmed in writing with the proforma invoice.
Can you supply spare parts later
Yes. Weichai engine parts, hydraulic components, and compaction system parts are available and can be shipped with the truck or separately.
Do you ship by container or RoRo
Trucks are typically shipped RoRo. Container shipment is possible but requires lowering the cab and may affect swing arm clearance.
What documents do I get for customs
Commercial invoice, packing list, bill of lading, certificate of origin, and CCC certificate are included. Pre-shipment inspection certificates are available upon request.
Price This Unit Against Your Port
Send the destination and quantity. A written specification, landed cost and shipping option comes back.