Starter Relay for MITSUBISHI ME202582 ME201117 12V 24V 80A 100A
A 12V 24V 80A 100A starter relay assembly that cross references MITSUBISHI ME202582 and ME201117, fitted to Mitsubishi trucks, excavators, engineering vehicles and buses. It controls the high-current circuit between the battery and the starter motor when the ignition switch is activated. Supplied in neutral, customised or CHINO branded packaging with a 12 month warranty from B/L date.
MOQ 10 pcs · Free samples, freight at your cost · Neutral or own brand packing · 12 month warranty from B/L date
Key Benefits
- Cross references two MITSUBISHI OEM part numbers, reducing the need for multiple SKUs in inventory
- Dual voltage compatibility (12V and 24V) supports both light and heavy-duty Mitsubishi commercial vehicles
- 80A and 100A current ratings ensure reliable cranking under high load and cold start conditions
- Zinc-plated or white-plated finish resists corrosion in harsh outdoor and industrial environments
- Plugs directly into the original vehicle harness with no rewiring required at the workshop
- 12 month warranty from B/L date covers failure due to manufacturing defects
Application Scenarios
Where It Is Used
- Fleet workshops replacing failed starter relays on Mitsubishi trucks after repeated cold start failures
- Aftermarket distributors stocking MITSUBISHI electrical components for Japanese truck fleets in Southeast Asia
- Engineering vehicle repair shops servicing excavators and construction machinery with original MITSUBISHI fitment
- OEM and ODM buyers sourcing a direct replacement for MITSUBISHI ME202582 in new vehicle builds
Who It Is For
- Truck parts importers sourcing against MITSUBISHI OEM numbers
- Aftermarket distributors serving Japanese commercial vehicle fleets
- Fleet maintenance managers running Mitsubishi trucks and engineering vehicles
- Repair chains that need reliable starter relays with proven cross-reference data
Problems It Solves
Symptoms on the Vehicle
- Starter motor that fails to engage due to a failed relay in the high-current control circuit
- Intermittent starting caused by a relay with degraded contacts or weak solenoid pull-in
- Original MITSUBISHI relays that are expensive and slow to source through dealer channels
- Mixed fleets requiring two different relays when a single dual-voltage unit can cover both 12V and 24V systems
Technical Features
- High-current switching for 80A and 100A applications in starter circuits
- Dual voltage operation: 12V and 24V compatible for use across different vehicle systems
- Robust solenoid actuation with high pull-in force for reliable engagement
- Zinc-plated or white-plated finish for corrosion resistance in outdoor and industrial environments
- Sealed relay housing protects internal components from dust and moisture
Specifications
Only values printed on the original product page are listed. Anything not shown here we confirm in writing before you order.
| OEM No | ME202582, ME201117 |
|---|---|
| Reference No | ME202582, ME201117 |
| Type | Starter relay |
| Voltage | 12V, 24V |
| Current Rating | 80A, 100A |
| Application | Mitsubishi truck, excavator, engineering vehicle, bus |
| Place of Origin | Ruian, China |
| MOQ | 10 pcs |
| Delivery Time | 7-10 working days |
| Packing | Neutral, customised or CHINO box |
| Warranty | 12 months since B/L date |
| Certification | ISO 9001:2015 |
Materials and Manufacturing
Materials
- Zinc-plated or white-plated steel relay housing
- Copper alloy terminal pins with corrosion-resistant plating
- Solenoid coil with insulated copper wire
- Moulded thermoplastic base and cover
Quality Control
- 100 percent function test before delivery
- Performance parameters tested in the in-house laboratory
- Component materials sourced from named suppliers under the IATF 16949:2016 documented process
- Production and test steps recorded on video
Manufacturing Process
Terminal stamping and plating
Solenoid coil winding and testing
PCB and contact assembly
Housing moulding and surface treatment
Final assembly and potting
Electrical function test
Customization Options
- Neutral packing with no brand marking
- Customer branded box and barcode label
- CHINO branded retail box
- OEM and ODM builds against a sample or drawing
Compared With the Alternatives
| MITSUBISHI dealer original relay | Same fitment and performance at lower cost; no dealer part number on the box unless branded packaging is ordered |
|---|---|
| Used or reclaimed relays | New units carry a 12 month warranty from B/L date; reclaimed stock carries no warranty and may have degraded contacts |
Use Guide
- Confirm the vehicle system voltage is 12V or 24V before fitting
- Isolate the battery, disconnect the failed relay from the starter control panel, and install the replacement in the same orientation
- Test the relay by turning the ignition switch to start; the solenoid should engage with a clear click and the starter motor should crank
- If the relay clicks but the starter does not turn, check the battery voltage, starter motor earth, and high-current cable connections
Also Listed Under
Questions About This Part
Which MITSUBISHI models does ME202582 fit?
It is listed for Mitsubishi trucks, excavators, engineering vehicles and buses. Send us your chassis number and we will confirm fitment before you order.
What is the minimum order quantity?
10 pcs on catalogue items. We also accept small trial orders for testing in your market.
How long is delivery?
7 to 10 working days for fast moving items held in stock. Production orders take longer and we confirm the delivery date in writing when the order is placed.
Can I get the parts in my own packaging?
Yes. We supply neutral packing, your own branded box with barcode label, or the CHINO box. Artwork is confirmed before printing.
What warranty do you give?
12 months from the B/L date. If a unit fails within that period due to manufacturing defect, we take responsibility. We reply to complaints within 24 hours and propose a solution within 3 days.
Are samples free?
The sample itself is free of charge. We discuss the freight cost with you before shipping.
How do you control quality?
Every part is function tested before delivery. Performance parameters are checked in our own laboratory. Components come from named suppliers and production follows the IATF 16949:2016 documented process.
Related Products
Ask for a Quote on Starter Relay for MITSUBISHI ME202582 ME201117 12V 24V 80A 1
Send the number printed on your original unit and a photograph of the connector. We confirm the match before you order and send a free sample first.