Truck Starter Relay for MITSUBISHI ME707490 24V 100A
A 24V 100A truck starter relay that cross references MITSUBISHI ME707490, fitted to MITSUBISHI Japan series trucks. It controls the high-current circuit between the battery and the starter motor during engine cranking. Supplied in neutral, customised or CHINO branded packaging with a 12 month warranty from B/L date.
MOQ 10 pcs · Free samples, freight at your cost · Neutral or own brand packing · 12 month warranty from B/L date
Key Benefits
- Cross references MITSUBISHI ME707490 so one part number covers the original fitment
- 100A rated contact capacity handles high cranking loads without overheating
- 24V system voltage matches the MITSUBISHI Japan series electrical architecture
- 100 percent factory test before delivery ensures reliable cranking performance
- Twelve month warranty from B/L date protects against early failure in service
Application Scenarios
Where It Is Used
- Fleet workshops replacing starter relays on MITSUBISHI Japan series trucks after failed starts or intermittent cranking
- Aftermarket distributors stocking MITSUBISHI electrical components for Japanese truck fleets
- OEM and ODM buyers sourcing a direct replacement for MITSUBISHI ME707490 with full traceability
- Repair chains diagnosing no-crank conditions where the starter relay is suspected
Who It Is For
- Truck parts importers who buy against MITSUBISHI OEM numbers
- Aftermarket distributors serving Japanese truck fleets in Europe and Southeast Asia
- Fleet maintenance managers running MITSUBISHI Japan series trucks
- Auto electrical repair shops that stock relays by OEM number and pin count
Problems It Solves
Symptoms on the Vehicle
- Engine cranks slowly or not at all due to a failed starter relay contact or coil
- Original relay unavailable through dealer channels or priced at premium
- Relays that overheat or weld contacts during repeated cranking attempts
- Mixed MITSUBISHI fleets that would otherwise need multiple relay part numbers
Technical Features
- 100A high-current contact rating for reliable starter motor engagement
- 24V commercial vehicle system voltage for compatibility with MITSUBISHI Japan series
- Electromagnetic coil actuation with built-in contact protection
- Sealed relay housing suitable for under-hood or cab-mounted relay panels
- Designed for repeated cranking cycles without degradation
Specifications
Only values printed on the original product page are listed. Anything not shown here we confirm in writing before you order.
| OEM No | ME707490 |
|---|---|
| Reference No | ME707490 |
| Type | Starter relay |
| Voltage | 24V |
| Current Rating | 100A |
| Application | MITSUBISHI Japan series |
| Place of Origin | Ruian, China |
| MOQ | 10 pcs |
| Delivery Time | 7-10 working days |
| Packing | Neutral, customised or CHINO box |
| Warranty | 12 months since B/L date |
| Certification | ISO 9001:2015 |
Materials and Manufacturing
Materials
- Moulded thermoplastic relay housing
- Copper alloy flat blade terminals
- Electromagnetic coil with insulated wire
- Silver alloy contact points for high durability
Quality Control
- 100 percent function test before delivery
- Performance parameters checked in the in-house laboratory
- Component materials sourced from named suppliers under the IATF 16949:2016 documented process
- Production and test steps recorded on video
Manufacturing Process
Terminal stamping and plating
Coil winding and assembly
PCB and contact assembly
Housing moulding
Final assembly and potting
Electrical function test
Customization Options
- Neutral packing with no brand marking
- Customer branded box and barcode label
- CHINO branded retail box
- OEM and ODM builds against a sample or drawing
Compared With the Alternatives
| MITSUBISHI dealer original relay | Same fitment and electrical performance at aftermarket pricing, but without the dealer part number on the box unless branded packaging is ordered |
|---|---|
| Used or reclaimed relays | New units carry a 12 month warranty from B/L date; reclaimed stock carries none and may have degraded contacts or coil |
Use Guide
- Confirm the truck is a 24V system before fitting
- Isolate the battery, unplug the failed relay from the relay panel and fit the replacement in the same orientation
- Test the starter engagement and release function before releasing the vehicle
- If the starter continues to crank after engine start, check the ignition switch and relay return spring before condemning the relay
Also Listed Under
Questions About This Part
Which MITSUBISHI models does ME707490 fit?
It is listed for the MITSUBISHI Japan series. Send us your chassis number and we will confirm against the original relay before you order.
What is the minimum order quantity?
10 pcs on catalogue items. We also accept small trial orders so you can test the part in your own market first.
How long is delivery?
7 to 10 working days for fast moving items held in stock. Production orders take longer and we confirm the date in writing when the order is placed.
Can I get the parts in my own packaging?
Yes. We supply neutral packing, your own branded box with barcode label, or the CHINO box. Artwork is confirmed before printing.
What warranty do you give?
12 months from the B/L date. If a unit fails within that period we take responsibility when the fault is caused by the part, and we reply to any complaint within 24 hours with a solution within 3 days.
Are samples free?
The sample itself is free of charge. We discuss the freight cost with you before shipping.
How do you control quality?
Every part is function tested before delivery and performance parameters are checked in our own laboratory. Components come from named suppliers and production follows the IATF 16949:2016 documented process.
Related Products
Ask for a Quote on Truck Starter Relay for MITSUBISHI ME707490 24V 100A
Send the number printed on your original unit and a photograph of the connector. We confirm the match before you order and send a free sample first.