Flasher Unit for MITSUBISHI MC898264 24V 10P
A 24V 10-pin electronic flasher relay assembly that cross references MITSUBISHI MC898264, 066500-3590, MC857355 and 066500-3123, fitted to MITSUBISHI Fuso Canter and other commercial vehicles. It controls the turn signal and hazard light circuits with a solid-state timing function, replacing the mechanical flasher that fails due to contact wear or solder joint fatigue. Supplied in neutral, customised or CHINO branded packaging with a 12 month warranty from B/L date.
MOQ 10 pcs · Free samples, freight at your cost · Neutral or own brand packing · 12 month warranty from B/L date
Key Benefits
- Cross references four MITSUBISHI OEM part numbers so one line item covers multiple chassis variants
- Ten pin housing matches the original loom connector with no rewiring required at the workshop
- Solid-state timing circuit eliminates the flicker and uneven flash rate caused by worn mechanical contacts
- Built-in protection prevents damage to the instrument panel fuse when the flasher is shorted
- Ships in 7 to 10 working days as a stocked fast-moving item
- Twelve month warranty from B/L date protects distributor shelf stock and fleet repair inventory
Application Scenarios
Where It Is Used
- Fleet workshops replacing flasher units on MITSUBISHI Fuso Canter trucks after repeated turn signal failures
- Aftermarket distributors restocking MITSUBISHI electrical components for Japanese commercial vehicle fleets
- Body builders installing new instrument panels on rebuilt MITSUBISHI chassis with no wiring changes
- Repair chains diagnosing hazard lights that flash too fast or not at all due to a failed flasher
Who It Is For
- Truck parts importers who buy against MITSUBISHI OEM numbers
- Aftermarket distributors serving Japanese truck fleets
- Fleet maintenance managers running MITSUBISHI Fuso Canter trucks and delivery vans
- Auto electrical repair shops that stock flashers by pin count and voltage
Problems It Solves
Symptoms on the Vehicle
- Turn signals that flash too rapidly due to worn mechanical contacts in the original flasher
- Hazard lights that fail to operate because the flasher has a cracked solder joint
- Original flashers that are slow to source and expensive through the dealer network
- Mixed MITSUBISHI fleets that would otherwise need four separate flasher part numbers
Technical Features
- Solid-state electronic timing circuit for consistent flash rate and long life
- 10-pin flat blade housing to match the original MITSUBISHI loom connector
- 24V commercial vehicle system voltage for compatibility with heavy-duty electrical systems
- Sealed assembly suitable for mounting in the cab or under the dash
- Integrated circuit protection against short circuits and overloads
Specifications
Only values printed on the original product page are listed. Anything not shown here we confirm in writing before you order.
| OEM No | MC898264, 066500-3590, MC857355, 066500-3123 |
|---|---|
| Type | Electronic flasher relay |
| Voltage | 24V |
| Pin Number | 10P |
| Application | MITSUBISHI Fuso Canter and other commercial vehicles |
| Place of Origin | Ruian, China |
| MOQ | 10 pcs |
| Delivery Time | 7-10 working days |
| Packing | Neutral, customised or CHINO box |
| Warranty | 12 months since B/L date |
| Certification | ISO 9001:2015 |
Materials and Manufacturing
Materials
- Moulded thermoplastic relay housing
- Copper alloy flat blade terminals
- Printed circuit board with timing IC and protection components
Quality Control
- 100 percent function test before delivery
- Performance parameters checked in the in-house laboratory
- Component materials sourced from named suppliers under the IATF 16949:2016 documented process
- Production and test steps recorded on video
Manufacturing Process
Terminal stamping and plating
PCB assembly and soldering
Housing moulding
Final assembly and potting
Electrical function test
Customization Options
- Neutral packing with no brand marking
- Customer branded box and barcode label
- CHINO branded retail box
- OEM and ODM builds against a sample or drawing
Compared With the Alternatives
| MITSUBISHI dealer original flasher | Same fitment and pin pattern at aftermarket pricing, but without the dealer part number on the box unless you order branded packaging |
|---|---|
| Mechanical flasher relay | The solid-state unit has no moving parts and lasts longer; mechanical units fail due to contact wear and solder fatigue |
| Used or reclaimed flashers | New units carry a 12 month warranty from B/L date; reclaimed stock carries none |
Use Guide
- Confirm the truck is a 24V system before fitting
- Match the 10-pin housing against the old relay before ordering
- Isolate the battery, unplug the failed flasher from the cab relay panel and fit the replacement in the same orientation
- Test turn signal and hazard light functions before releasing the vehicle
- If the lights flash erratically, check the bulb wattage and earth connection before condemning the flasher
Also Listed Under
Questions About This Part
Which MITSUBISHI models does MC898264 fit?
It is listed for the MITSUBISHI Fuso Canter and other commercial vehicles. Send us your chassis number and we will confirm against the original relay before you order.
What is the minimum order quantity?
10 pcs on catalogue items. We also accept small trial orders so you can test the part in your own market first.
How long is delivery?
7 to 10 working days for fast moving items held in stock. Production orders take longer and we confirm the date in writing when the order is placed.
Can I get the parts in my own packaging?
Yes. We supply neutral packing, your own branded box with barcode label, or the CHINO box. Artwork is confirmed before printing.
What warranty do you give?
12 months from the B/L date. If a unit fails within that period we take responsibility when the fault is caused by the part, and we reply to any complaint within 24 hours with a solution within 3 days.
Are samples free?
The sample itself is free of charge. We discuss the freight cost with you before shipping.
How do you control quality?
Every part is function tested before delivery and performance parameters are checked in our own laboratory. Components come from named suppliers and production follows the IATF 16949:2016 documented process.
Related Products
Ask for a Quote on Flasher Unit for MITSUBISHI MC898264 24V 10P
Send the number printed on your original unit and a photograph of the connector. We confirm the match before you order and send a free sample first.