Speed Sensor MC867581 for MITSUBISHI 24V 3P
A 24V 3-pin speed sensor that cross references MITSUBISHI MC867581, fitted to MITSUBISHI commercial vehicles. It monitors engine RPM and transmits a pulsed signal to the ECU or dashboard for speed and tachometer display. Supplied in neutral, customised or CHINO branded packaging with a 12 month warranty from B/L date.
MOQ 10 pcs · Free samples, freight at your cost · Neutral or own brand packing · 12 month warranty from B/L date
Key Benefits
- Cross references MITSUBISHI MC867581, ensuring direct fit without modification
- Three-pin connector matches the original loom, eliminating the need for rewiring or adapters
- Plastic housing with silver finish provides corrosion resistance in harsh commercial vehicle environments
- 24V system voltage compatible with heavy-duty MITSUBISHI trucks and buses
- 12 month warranty from B/L date covers failure due to manufacturing defects
- Ships in 7 to 10 working days as a stocked fast-moving item
Application Scenarios
Where It Is Used
- Fleet workshops replacing failed speed sensors on MITSUBISHI trucks after diagnostic trouble codes indicate signal loss
- Aftermarket distributors restocking MITSUBISHI electrical components for mixed fleet service
- OEM and ODM buyers integrating the sensor into new vehicle builds using the original part number
- Repair chains diagnosing tachometer or speedometer failure due to sensor signal dropout
Who It Is For
- Truck parts importers sourcing MITSUBISHI OEM replacements
- Aftermarket distributors serving MITSUBISHI truck and bus fleets
- Fleet maintenance managers maintaining MITSUBISHI commercial vehicles
- Auto electrical repair shops that stock sensors by OEM number and pin count
Problems It Solves
Symptoms on the Vehicle
- Tachometer or speedometer that reads zero or fluctuates due to a failed speed sensor
- Diagnostic trouble codes (DTCs) related to engine speed signal loss in the ECU
- Original MITSUBISHI sensors that are slow to source and expensive through dealer channels
- Mixed MITSUBISHI fleets that would otherwise require multiple part numbers for similar sensors
Technical Features
- 3-pin connector for direct plug-in replacement of the original sensor
- 24V commercial vehicle system voltage for compatibility with MITSUBISHI heavy-duty trucks
- Pulsed signal output to ECU or dashboard for accurate RPM and speed monitoring
- Plastic housing with silver finish for durability and resistance to vibration and moisture
- Designed to fit in engine compartment or transmission housing locations typical for MITSUBISHI models
- Sealed construction suitable for long-term operation in dusty and wet environments
Specifications
Only values printed on the original product page are listed. Anything not shown here we confirm in writing before you order.
| OEM No | MC867581 |
|---|---|
| Reference No | MC867581 |
| Type | Speed sensor |
| Voltage | 24V |
| Pin Number | 3P |
| Application | MITSUBISHI |
| Place of Origin | Ruian, China |
| MOQ | 10 pcs |
| Delivery Time | 7-10 working days |
| Packing | Neutral, customised or CHINO box |
| Warranty | 12 months since B/L date |
| Certification | ISO 9001:2015 |
Materials and Manufacturing
Materials
- Moulded plastic sensor housing
- Silver-colored metal connector terminals
- Internal coil and magnet assembly for signal generation
Quality Control
- 100 percent function test before delivery
- Performance parameters checked in the in-house laboratory
- Component materials sourced from named suppliers under the IATF 16949:2016 documented process
- Production and test steps recorded on video
Manufacturing Process
Terminal stamping and plating
Coil winding and magnet assembly
Housing moulding and finishing
Final assembly and sealing
Electrical function test
Customization Options
- Neutral packing with no brand marking
- Customer branded box and barcode label
- CHINO branded retail box
- OEM and ODM builds against a sample or drawing
Compared With the Alternatives
| MITSUBISHI dealer original sensor | Same fitment and pin pattern at aftermarket pricing, but without the dealer part number on the box unless you order branded packaging |
|---|---|
| Used or reclaimed sensor | New units carry a 12 month warranty from B/L date; reclaimed stock carries no warranty and may have degraded magnetic properties |
Use Guide
- Confirm the vehicle is a 24V system before fitting
- Match the 3-pin connector against the old sensor before ordering
- Disconnect the battery, remove the failed sensor from the engine or transmission housing, and install the replacement in the same orientation
- Test the tachometer and speedometer readings after reconnecting the battery
- If signal is still missing, check the wiring harness and ECU input for faults before condemning the sensor
Also Listed Under
Questions About This Part
Which MITSUBISHI models does MC867581 fit?
It is listed for MITSUBISHI commercial vehicles. Send us your chassis number and we will confirm against the original sensor before you order.
What is the minimum order quantity?
10 pcs on catalogue items. We also accept small trial orders so you can test the part in your own market first.
How long is delivery?
7 to 10 working days for fast moving items held in stock. Production orders take longer and we confirm the date in writing when the order is placed.
Can I get the parts in my own packaging?
Yes. We supply neutral packing, your own branded box with barcode label, or the CHINO box. Artwork is confirmed before printing.
What warranty do you give?
12 months from the B/L date. If a unit fails within that period we take responsibility when the fault is caused by the part, and we reply to any complaint within 24 hours with a solution within 3 days.
Are samples free?
The sample itself is free of charge. We discuss the freight cost with you before shipping.
How do you control quality?
Every part is function tested before delivery and performance parameters are checked in our own laboratory. Components come from named suppliers and production follows the IATF 16949:2016 documented process.
Related Products
Ask for a Quote on Speed Sensor MC867581 for MITSUBISHI 24V 3P
Send the number printed on your original unit and a photograph of the connector. We confirm the match before you order and send a free sample first.