Flasher Unit for ISUZU 1-82550-299-0 24V 6P
A 24V 6-pin electronic flasher relay that cross references ISUZU 1-82550-299-0, 1825502990, 068300-0460 and 0683000460, fitted to ISUZU trucks and commercial vehicles. It controls the turn signal and hazard light circuits by generating the flashing sequence and provides load protection. Supplied in neutral, customised or CHINO branded packaging with a 12 month warranty from B/L date.
MOQ 10 pcs · Free samples, freight at your cost · Neutral or own brand packing · 12 month warranty from B/L date
Key Benefits
- Cross references four ISUZU part numbers so one line item covers multiple chassis builds
- Six pin flat blade housing matches the original loom connector with no rewiring required
- Electronic timing circuit restores consistent flashing frequency when the original fails
- Built-in load protection prevents damage to the flasher unit and cab fuse box during short circuits
- Ships in 7 to 10 working days as a stocked fast-moving item
- Twelve month warranty from B/L date protects distributor shelf stock
Application Scenarios
Where It Is Used
- Fleet workshops replacing flasher units on ISUZU trucks after signal failure during winter inspections
- Aftermarket distributors restocking ISUZU electrical components for mixed Japanese truck fleets
- Body builders integrating turn signal systems on new ISUZU chassis conversions
- Repair chains diagnosing hazard lights that flash too fast, too slow, or not at all
Who It Is For
- Truck parts importers who buy against ISUZU OEM numbers
- Aftermarket distributors serving Japanese truck fleets
- Fleet maintenance managers running ISUZU trucks and commercial vehicles
- Auto electrical repair shops that stock relays by pin count and voltage
Problems It Solves
Symptoms on the Vehicle
- Turn signals that flash too fast due to a failed timing circuit in the original relay
- Hazard lights that do not flash at all or run continuously
- Original relays that are slow to source and expensive through the dealer network
- Mixed ISUZU fleets that would otherwise need four separate relay part numbers
Technical Features
- Electronic flasher circuit for turn signals and hazard lights in one assembly
- 6-pin flat blade housing to the original ISUZU pattern with no wiring changes
- 24V commercial vehicle system voltage
- Built-in load protection against shorted bulb circuits
- Sealed assembly suitable for cab-mounted relay panels
- Consistent flashing frequency under varying load conditions
Specifications
Only values printed on the original product page are listed. Anything not shown here we confirm in writing before you order.
| OEM No | 1-82550-299-0, 1825502990, 068300-0460, 0683000460 |
|---|---|
| Type | Electronic flasher relay |
| Voltage | 24V |
| Pin Number | 6P |
| Application | ISUZU trucks and commercial vehicles |
| Place of Origin | Ruian, China |
| MOQ | 10 pcs |
| Delivery Time | 7-10 working days |
| Packing | Neutral, customised or CHINO box |
| Warranty | 12 months since B/L date |
| Certification | ISO 9001:2015 |
Materials and Manufacturing
Materials
- Moulded thermoplastic relay housing
- Copper alloy flat blade terminals
- Printed circuit board with electronic timing components
Quality Control
- 100 percent function test before delivery
- Performance parameters checked in the in-house laboratory
- Component materials sourced from named suppliers under the IATF 16949:2016 documented process
- Production and test steps recorded on video
Manufacturing Process
Terminal stamping and plating
PCB assembly and soldering
Housing moulding
Final assembly and potting
Electrical function test
Customization Options
- Neutral packing with no brand marking
- Customer branded box and barcode label
- CHINO branded retail box
- OEM and ODM builds against a sample or drawing
Compared With the Alternatives
| ISUZU dealer original relay | Same fitment and pin pattern at aftermarket pricing, but without the dealer part number on the box unless you order branded packaging |
|---|---|
| Mechanical flasher relay | The electronic unit provides consistent flashing frequency regardless of bulb load; mechanical relays vary with bulb resistance |
| Used or reclaimed relays | New units carry a 12 month warranty from B/L date; reclaimed stock carries none |
Use Guide
- Confirm the truck is a 24V system before fitting
- Match the 6-pin housing against the old relay before ordering
- Isolate the battery, unplug the failed relay from the cab relay panel and fit the replacement in the same orientation
- Test turn signal and hazard light functions including flash rate and return to off position before releasing the vehicle
- If the lights flash erratically, check bulb resistance and earth connections before condemning the relay
Also Listed Under
Questions About This Part
Which ISUZU models does 1-82550-299-0 fit?
It is listed for ISUZU trucks and commercial vehicles. Send us your chassis number and we will confirm against the original relay before you order.
What is the minimum order quantity?
10 pcs on catalogue items. We also accept small trial orders so you can test the part in your own market first.
How long is delivery?
7 to 10 working days for fast moving items held in stock. Production orders take longer and we confirm the date in writing when the order is placed.
Can I get the parts in my own packaging?
Yes. We supply neutral packing, your own branded box with barcode label, or the CHINO box. Artwork is confirmed before printing.
What warranty do you give?
12 months from the B/L date. If a unit fails within that period we take responsibility when the fault is caused by the part, and we reply to any complaint within 24 hours with a solution within 3 days.
Are samples free?
The sample itself is free of charge. We discuss the freight cost with you before shipping.
How do you control quality?
Every part is function tested before delivery and performance parameters are checked in our own laboratory. Components come from named suppliers and production follows the IATF 16949:2016 documented process.
Related Products
Ask for a Quote on Flasher Unit for ISUZU 1-82550-299-0 24V 6P
Send the number printed on your original unit and a photograph of the connector. We confirm the match before you order and send a free sample first.