Starter Relay for HINO 0590 017 0715 24V
A 24V starter relay that cross references HINO 0590 017 0715, 05900170715 and 28410-1120, fitted to HINO excavator trucks, engineering vehicles and buses. It controls the high current flow to the starter motor during engine cranking and protects the ignition switch from overload. Supplied in neutral, customised or CHINO branded packaging with a 12 month warranty from B/L date.
MOQ 10 pcs · Free samples, freight at your cost · Neutral or own brand packing · 12 month warranty from B/L date
Key Benefits
- Cross references three HINO OEM numbers so one part covers multiple vehicle builds
- 24V operation matches the commercial vehicle electrical system voltage
- Zinc-plated or white-plated finish resists corrosion in harsh outdoor environments
- Plugs directly into the original loom connector with no rewiring required
- 12 month warranty from B/L date protects against early failure in fleet operations
Application Scenarios
Where It Is Used
- Fleet workshops replacing starter relays on HINO excavator trucks after repeated cranking failures
- Aftermarket distributors stocking HINO electrical components for engineering vehicle fleets
- Repair chains diagnosing no-crank issues on HINO buses and construction vehicles
- OEM and ODM buyers integrating the relay into new vehicle builds with HINO-compatible systems
Who It Is For
- Truck parts importers sourcing HINO OEM replacements
- Aftermarket distributors serving HINO and Komatsu engineering vehicle markets
- Fleet maintenance managers running HINO excavator trucks and buses
- Engineering vehicle repair shops needing reliable starter relays with proven fitment
Problems It Solves
Symptoms on the Vehicle
- Starter motor that does not engage due to a failed relay in the cranking circuit
- Ignition switch damage caused by high current draw when the relay fails open
- Long lead times and high cost of original HINO starter relays from dealers
- Multiple relay part numbers needed for different HINO and Komatsu vehicle models
Technical Features
- 24V commercial vehicle system voltage for reliable cranking in cold conditions
- Zinc-plated or white-plated metal housing for corrosion resistance
- Direct plug-in fit to original loom connector with no rewiring
- Single pole, normally open contact design for standard starter circuit operation
- Sealed construction suitable for cab and engine bay mounting
Specifications
Only values printed on the original product page are listed. Anything not shown here we confirm in writing before you order.
| OEM No | 0590 017 0715, 05900170715, 28410-1120 |
|---|---|
| Type | Starter relay |
| Voltage | 24V |
| Application | HINO, Komatsu excavator truck, engineering vehicle, bus |
| Color | Zinc-plating, white-plating |
| Place of Origin | Ruian, China |
| MOQ | 10 pcs |
| Delivery Time | 7-10 working days |
| Packing | Neutral, customised or CHINO box |
| Warranty | 12 months since B/L date |
| Certification | ISO 9001:2015 |
Materials and Manufacturing
Materials
- Zinc-plated or white-plated steel relay housing
- Copper alloy contact terminals
- Insulated plastic base and cover
- Electromagnetic coil with insulated wire
Quality Control
- 100 percent function test before delivery
- Performance parameters tested in the in-house laboratory
- Component materials sourced from named suppliers under the IATF 16949:2016 documented process
- Production and test steps recorded on video
Manufacturing Process
Terminal stamping and plating
Coil winding and assembly
PCB and contact assembly
Housing moulding and plating
Final relay assembly and potting
Electrical function test
Customization Options
- Neutral packing with no brand marking
- Customer branded box and barcode label
- CHINO branded retail box
- OEM and ODM builds against a sample or drawing
Compared With the Alternatives
| HINO dealer original relay | Same fitment and performance at aftermarket pricing, but without the dealer part number unless branded packaging is ordered |
|---|---|
| Universal 24V starter relay | The original connector and pin layout are preserved; universal relays require wiring adapters and risk incorrect polarity |
| Used or reclaimed relays | New units carry a 12 month warranty from B/L date; reclaimed stock carries no warranty and may have degraded contacts |
Use Guide
- Confirm the vehicle is a 24V system before fitting
- Match the relay housing and pin layout against the original before ordering
- Disconnect the battery, remove the failed relay from the relay panel, and install the replacement in the same orientation
- Test the starter circuit with the ignition switch; ensure the relay engages and the engine cranks properly
- If the starter does not engage, check the battery voltage, ignition switch output, and ground connection before replacing the relay
Also Listed Under
Questions About This Part
Which HINO and Komatsu models does 0590 017 0715 fit?
It is listed for HINO excavator trucks, engineering vehicles, and buses, and for Komatsu excavators. Send us your chassis number and we will confirm fitment before you order.
What is the minimum order quantity?
10 pcs on catalogue items. We accept small trial orders to test the part in your market.
How long is delivery?
7 to 10 working days for stocked fast-moving items. Production orders are confirmed in writing upon order placement.
Can I get the parts in my own packaging?
Yes. We supply neutral packing, your branded box with barcode label, or the CHINO box. Artwork is confirmed before printing.
What warranty do you give?
12 months from the B/L date. If a unit fails within that period due to a manufacturing fault, we take responsibility and respond within 24 hours with a solution within 3 days.
Are samples free?
Yes, the sample is free of charge. We discuss freight cost with you before shipping.
How do you control quality?
Every part is function tested before delivery. Performance parameters are checked in our in-house laboratory. Components come from named suppliers and production follows the IATF 16949:2016 documented process.
Related Products
Ask for a Quote on Starter Relay for HINO 0590 017 0715 24V
Send the number printed on your original unit and a photograph of the connector. We confirm the match before you order and send a free sample first.