ETL LED Panel Light

ETL 4 inch Square LED panel light

ETL 4 inch Square LED panel light is part of our ETL LED Panel Light range, produced on our own lines in Jiangmen, Guangdong. It runs on 90-130V AC, rated IP30, supplied with ETL / Energy Star documentation.

Model: BL-RF-12A
Input Voltage: 90-130V AC
Output: 80-90lm/W
Protection: IP30
Warranty: 3 to 5 years
Certificates: ETL / Energy Star

Request A Quote Request A Sample

Talk to an engineer on WhatsApp 0086-13902885704 · Manufactured in Jiangmen, Guangdong since 1998

ETL Energy Star

Product Overview

Below are our ETL Control number 5012309 LED panel Light, BL-RF-12A

Key Benefits

Why Buyers Specify The ETL 4 inch Square LED panel light

Save Energy

Ultra-thin Recessed LED Panel light panel uses only 9 Watts, which is equivalent of 27W incandescent bulb. Good replacement decision. With lifespan 50,000 hours can last up to 45,7 years with 3 hours of use per day

Dimmable

This all in one panel with built-in driver uses smooth dimming features from 10-100% in order to control the brightness so you can set your preferred lighting mood throughout the day. Compatible with most LED Triac dimmers

Easy Installation

This low profile downlight led lighting fixture comes with electrical junction box and clips for easy installation. Can be used with new construction mounting plate.

Certification & Warranty

ETL and ENERGY STAR certified for top quality standards and safe operation. This device has IC rated housing and approved to be installed into ceilings with insulated roof space, and can safely be in direct contact with insulation. Also, it is suitable for damp locations. Our fixtures are high quality, energy efficient and they come with a 5-year limited warranty

Wide Application

Ideal for commercial or hospitality using. You can apply these canless LED Recessed panel with J-box at offices, hotels, hallways, meeting rooms, restaurants, metro stations and other commercial place. Also can be used at home. Possible using our slim profile panel at kitchen, bathroom, dining room, basement, balcony, corridor

Specifications

Full published specification for ETL 4 inch Square LED panel light. Ask us on WhatsApp if you need a value confirmed against a specific production batch.

Electrical

Rated Power	9W
Replacement Power	27W
Input Voltage	90-130V AC
Frequency	50/60Hz
Normal current	280-300mA
LED Driver case	Auminum Junction box for North American market
Starting time	<0.5s
Power factor	>0.9
Dimming Type	Triac Dimming （0－100% brightness adjustable）

Light Output

Color temperature	3000K, 4000K, 5000K / 3CCT
Lumen	80-90lm/W
Beam angle	120°

Construction

Lamp Dimension	4 inch or 12012012mm
Hole cutting	105*105mm
Material	Aluminum

Environment

Lifespan	>50,000 h
IP Rate	IP30

Commercial

Model number	BL-RF-12A
Warranty	3 to 5 years
Certificates	ETL / Energy Star

Other Details

Energy consumption	9 Kwh/1000h
Color rendering index	>80 Ra
Color Consistency	< 5 SDCM
Suitable for accent lighting	Yes
Swich cycles	20000
Energy efficiency class	A+
LED-Type	2835SMD
Lamp housing Color	White / Black / Sand nickel
temperature range	-15℃ ~ +50℃

Product Detail Images

Photographs of the actual product as supplied from our Jiangmen factory.

ETL 4 inch Square LED panel light detail 1

ETL 4 inch Square LED panel light detail 2

ETL 4 inch Square LED panel light detail 3

ETL 4 inch Square LED panel light detail 4

ETL 4 inch Square LED panel light detail 5

ETL 4 inch Square LED panel light detail 6

ETL 4 inch Square LED panel light detail 7

Use Guide

Installation details that come straight from this model's own specification.

Waterproof Construction

IP30

Ceiling Cut-out

105*105mm

Compare With Other Models In This Range

Every value below is taken from the published datasheet of each model, so you can line up the differences before you ask for a quotation.

	ETL 4 inch Square LED panel light This product	ETL DLC 2*4 Ft Backlit LED panel light	ETL DLC 2*2 Ft Backlit LED panel light	ETL DLC 1*4 Ft Backlit LED panel light
Input Voltage	90-130V AC	100-277V	100-277V	100-277V
Power	9W	60W	40W	40W
Lumen	80-90lm/W	>120LM/W	>120LM/W	>120LM/W
Protection	IP30	IP30	IP30	IP30
Size	4 inch or 12012012mm	603121330m (1*4' Feet)	60360330m (2*2' Feet)	303121330m (1*4' Feet)

Manufacturing And Quality

How This Product Is Built And Checked

01
Material Inspection

Incoming material is carefully inspected and selected before it reaches the line.
02
Assembly

Our QC team follows every unit along the assembly line on our 6 production lines in Jiangmen.
03
Aging Test

Aging test of more than 24.5 hours is run before shipping.
04
Final Inspection

Load test, high-voltage test, grounding conduction test and install test on the finished light.

Quality Control Process Factory Tour Certification Library

Customization Options

Beauty STC Lighting has concentrated on commercial LED light manufacturing for over 15 years and offers professional R&D, patented design and manufacturing experience for customised products.

OEM and ODM production with your brand, packaging and carton artwork.
Patented design and manufacturing experience from our own R&D team.
Certification documents issued against your model number where the construction allows.

See The OEM & ODM Service

Certifications For This Range

This model is supplied with ETL / Energy Star documentation.

ETL TUV CE UKCA PSE RoHS Certificates

View All Certificates

FAQ

ETL 4 inch Square LED panel light FAQ

Can a third-party inspection be arranged before delivery?

Yes.BEAUTY STC is quite confident with our products and has passed many international certifications .You can arrange an inspector in you side or we can assist you to do that.

Why your product comes with a high cost performance?

Firstly, our product operated under ETL and CE standards and we test the products one by one to make sure each single unit workswell enough.

Do you accept customize design?

Yes, we are offering OEM and ODM service as well .If you have any good idea, we can help you realize it.

Are the products safe enough?

Our products have been tested thoroughly and are certificated by numerous internationally recognized regulatory bodies and safety organizations, including USA ETL, UL and European TUV, SGS, CE and RoHS.

Do you sell to individual customers directly?

No, we are manufacturer and only for wholesale. We have distributors in many countries, the end users can buy from them.

How can I get the sample from you?

If you are interested on our products, please contact us directly, we can send the free sample for checking the quality, but the custom should pay for the express fee.

How can I make the order?

You can email us or chat to our sales online. We have published our sales team and the contact info on the contact page. You can let us know what would you like to order and we will make PI for your confirmation. After you make the payment, we will process your order.

Are you a truly factory

Yes we are a factory has almost 16 years experience on producing. Welcome to visit us any time you want.