Other Food & Beverage Equipment
Spray Dryer
Model HTK-GZT-01 spray dryer with a working capacity of 1000 to 30,000 litres per hour in SUS304, used to make milk powder, fruit juice powder and similar products. Product recovery is no less than 97% and finished particle size is 80 to 120 mesh.
- SUS304 stainless steel
Product Overview
Model HTK-GZT-01 spray dryer with a working capacity of 1000 to 30,000 litres per hour in SUS304, used to make milk powder, fruit juice powder and similar products. Product recovery is no less than 97% and finished particle size is 80 to 120 mesh. The spray tower's inner cylinder is SUS304 mirror plate no less than 2.5 mm thick, the tower body is insulated, and product contact surfaces are mirror polished to Ra 0.8 µm or better. A stainless steel platform, stairs and railings are fitted outside the tower.
Key Benefits
- Product recovery of no less than 97%
- Finished particle size of 80 to 120 mesh
- Mirror polished product contact surfaces at Ra 0.8 µm or better
- Inner cylinder in SUS304 mirror plate of at least 2.5 mm with an insulated tower body
- Access platform, stairs and railings supplied with the tower
Problems It Solves
- Product loss in drying, where a few percent of recovery is significant money
- Particle size that does not meet customer specification
- Powder sticking to tower walls that are not properly finished or insulated
- Access difficulties for cleaning and maintaining a tall tower
Where It Is Used
Applications And Buyers
Application Scenarios
- Producing milk powder from concentrated milk
- Making fruit juice powder from concentrate
- Converting liquid product into a stable, shippable powder
- Producing instant products for reconstitution
Who It Is For
- Dairy powder producers
- Juice powder and instant drink manufacturers
- Food ingredient producers
- Plants adding powder production to a liquid line
Technical Features And Specifications
Technical Features
- Working capacity 1000 L/H to 30,000 L/H
- Product recovery rate no less than 97%
- Finished particle size 80 to 120 mesh
- Inner cylinder SUS304 mirror plate, thickness no less than 2.5 mm
- Product contact surfaces mirror polished to Ra 0.8 µm or better
- Insulated tower body with external stainless steel platform, stairs and railings
- Feeding system, medium circulation, air dehumidification and heating systems
| Product Model | HTK-GZT-01 |
|---|---|
| Working Capacity | 1000 L/H to 30,000 L/H, customised |
| Material | SUS304 |
| Product Recovery | Not less than 97% |
| Particle Size | 80 to 120 mesh |
| Inner Cylinder | SUS304 mirror plate, not less than 2.5 mm |
| Internal Surface Finish | Mirror polished, Ra 0.8 µm or better |
| Minimum Order | One unit |
| Factory Output | 10 units per month |
How It Is Made And Checked
Materials Process And Quality Control
Materials
- SUS304 stainless steel
Manufacturing Process
- Stainless steel fabrication
- Mirror polishing
- Welding
- Insulation
- Assembly
- Testing
Quality Control
- Specification agreed in writing before production starts
- First article or sample approved against the agreed specification
- Goods inspected and photographed at the factory before loading
- Inspection report sent to you before the container sails
Customisation Options
What Can Be Varied
- Capacity from 1000 to 30,000 litres per hour
- Tower dimensions for the product and drying time
- Atomiser type for the required particle size
- Air heating and dehumidification arrangement
- Powder collection and conveying system
Compared With The Alternatives
| Freeze dryer | Spray drying is far cheaper per kilogram and much faster; freeze drying preserves colour, aroma and structure better and is used for premium products. |
|---|---|
| Drying without pre-concentration | Removing water in an evaporator first is much cheaper than removing it in the dryer, which is why powder lines normally run both. |
Use Guide
- Concentrate the product in an evaporator before spray drying to reduce energy cost
- Set the atomiser for the particle size the customer specification requires
- Keep the tower insulated and the inlet air dehumidified to limit wall deposits
- Plan cleaning access using the supplied platform and stairs
Questions
Questions Buyers Ask About This Product
What recovery rate can be expected?
No less than 97% product recovery.
What particle size does it produce?
80 to 120 mesh after spray drying.
What is the tower built from?
The inner cylinder is SUS304 mirror plate of no less than 2.5 mm, with an insulated tower body and external stainless steel platform, stairs and railings.
How smooth are the product contact surfaces?
Mirror polished to Ra 0.8 µm or better on the inner surface, with the outer surface polished as well.
What capacity is available?
1000 to 30,000 litres per hour, customised to your production.
Related Products
Others In Other Food & Beverage Equipment
Plant Utility EquipmentSteam Boiler For Food And Beverage Plants
Model HTK-GL-01 boiler supplying process steam to food and beverage production. It is available as an electrical…
View Product
Plant Utility EquipmentCooling Tower
Model HTK-LQT-01 cooling tower for food and beverage plants, available as a circular flow inverse cooling tower of…
View Product
Plant Utility EquipmentOil Free Air Compressor
Model HTK-KYJ-01 air compressor for food and beverage production, available as an oil free screw compressor or as a…
View Product
Plant Utility EquipmentChilling Unit
Model HTK-C-01 chilling unit supplying chilled water or glycol to a processing line, available as an air cooler type…
View Product
Crate Washing MachinesCrate Washing Machine
Model HTK-XXJ-01 crate washing machine built in SUS304 stainless steel, with a working capacity from 150 to 1200…
View Product
Other Food & Beverage EquipmentFreeze Dryer
Model HTK-DGJ-01 freeze dryer with input capacities from 3 kg, 5 kg and 10 kg through to 1000 kg, 2000 kg and 5000…
View ProductFurther Reading
Guides And Industries That Cover This
Get A Price For Spray Dryer
Send the duty figures, the material if it is fixed, and the quantity. We will confirm the specification and quote against it.