Other Food & Beverage Equipment
Centrifugal Separator
Model HTK-FLJ-01 separator with a working capacity of 1000 to 30,000 litres per hour, built in SUS304 or SUS316L. It is used for dairy purification and milk and fat separation, and in fruit juice, tea drinks, coffee and beer production.
- SUS304 stainless steel
- SUS316L stainless steel
Product Overview
Model HTK-FLJ-01 separator with a working capacity of 1000 to 30,000 litres per hour, built in SUS304 or SUS316L. It is used for dairy purification and milk and fat separation, and in fruit juice, tea drinks, coffee and beer production. It separates extremely fine solid particles below one micron that are highly dispersed in suspension, while keeping the active ingredients, nutritional value, freshness and aroma of the product intact. Inlet pressure is 0.05 to 0.1 MPa, outlet pressure 0.1 to 0.4 MPa and motor power 4 to 30 kW.
Key Benefits
- Separates solids finer than one micron from the liquid phase
- Works without damaging active ingredients, nutrition, freshness or aroma
- Capacity from 1000 to 30,000 litres per hour
- Used across dairy, juice, tea, coffee and beer production
- Published pressure and power figures so the duty can be checked
Problems It Solves
- Fine particles that filtration cannot remove economically
- Fat content that varies between batches of milk
- Sediment in finished juice or tea drinks
- Clarification processes that strip aroma and nutritional value
Where It Is Used
Applications And Buyers
Application Scenarios
- Purifying raw milk before pasteurisation
- Separating cream from milk to standardise fat content
- Clarifying fruit juice and tea drinks
- Clarifying coffee extract and beer
Who It Is For
- Dairy processors standardising milk fat
- Juice and tea beverage producers
- Breweries clarifying beer
- Coffee extract producers
Technical Features And Specifications
Technical Features
- Working capacity 1000 L/H to 30,000 L/H
- SUS304 or SUS316L construction
- Separation of solid particles below 1 micron
- Inlet pressure 0.05 to 0.1 MPa
- Outlet pressure 0.1 to 0.4 MPa
- Motor power 4 kW to 30 kW
| Product Model | HTK-FLJ-01 |
|---|---|
| Working Capacity | 1000 L/H to 30,000 L/H, customised |
| Material | SUS304 / SUS316L |
| Particle Separation | Below 1 micron |
| Inlet Pressure | 0.05 to 0.1 MPa |
| Outlet Pressure | 0.1 to 0.4 MPa |
| Motor Power | 4 kW to 30 kW |
| Minimum Order | One unit |
| Factory Output | 50 units per month |
How It Is Made And Checked
Materials Process And Quality Control
Materials
- SUS304 stainless steel
- SUS316L stainless steel
Manufacturing Process
- Precision machining
- Balancing
- Assembly
- Performance testing
Quality Control
- Specification agreed in writing before production starts
- First article or sample approved against the agreed specification
- Goods inspected and photographed at the factory before loading
- Inspection report sent to you before the container sails
Customisation Options
What Can Be Varied
- Capacity from 1000 to 30,000 litres per hour
- Configuration for purification or fat separation
- SUS304 or SUS316L construction
- Motor power within the 4 to 30 kW range
- Control and discharge arrangement
Compared With The Alternatives
| Filtration | Filters need replacing and struggle with very fine particles at volume; a centrifugal separator handles sub micron solids continuously. |
|---|---|
| Homogeniser | The separator removes or splits phases; the homogeniser breaks fat globules down so they stay dispersed. Dairy lines usually run both. |
Use Guide
- State whether the duty is purification or fat separation, since the bowl configuration differs
- Check inlet pressure against the published 0.05 to 0.1 MPa range
- Keep feed flow steady, since separation efficiency depends on it
- Follow the balancing and bowl inspection schedule in the manual
Questions
Questions Buyers Ask About This Product
How fine a particle can it separate?
Extremely fine solid particles below one micron that are highly dispersed in the suspension.
What capacity is available?
1000 to 30,000 litres per hour, customised to your line.
Which products is it used with?
Dairy purification and milk and fat separation, plus fruit juice, tea drinks, coffee and beer.
What motor power is required?
Between 4 kW and 30 kW depending on the capacity.
Does separation damage the product?
The process is designed so active ingredients, nutritional value, freshness and the original aroma remain intact.
Related Products
Others In Other Food & Beverage Equipment
Plant Utility EquipmentSteam Boiler For Food And Beverage Plants
Model HTK-GL-01 boiler supplying process steam to food and beverage production. It is available as an electrical…
View Product
Plant Utility EquipmentCooling Tower
Model HTK-LQT-01 cooling tower for food and beverage plants, available as a circular flow inverse cooling tower of…
View Product
Plant Utility EquipmentOil Free Air Compressor
Model HTK-KYJ-01 air compressor for food and beverage production, available as an oil free screw compressor or as a…
View Product
Plant Utility EquipmentChilling Unit
Model HTK-C-01 chilling unit supplying chilled water or glycol to a processing line, available as an air cooler type…
View Product
Crate Washing MachinesCrate Washing Machine
Model HTK-XXJ-01 crate washing machine built in SUS304 stainless steel, with a working capacity from 150 to 1200…
View Product
Other Food & Beverage EquipmentFreeze Dryer
Model HTK-DGJ-01 freeze dryer with input capacities from 3 kg, 5 kg and 10 kg through to 1000 kg, 2000 kg and 5000…
View ProductFurther Reading
Guides And Industries That Cover This
Get A Price For Centrifugal Separator
Send the duty figures, the material if it is fixed, and the quantity. We will confirm the specification and quote against it.