Strip Light with 5050 Smd Led
The preferred choice for high-brightness and RGB color-changing scenarios. Color Options: Single-color (white 2200-6500K, red, blue, green, etc.), RGB (16 million color combinations), RGBW (RGB + warm white dual-mode).
Product Overview
A flexible LED strip light with 5050 SMD LEDs designed for high-brightness applications and dynamic color-changing effects. The strip is bendable at any angle up to 180 degrees, allowing installation on curved surfaces without damage. It is cuttable at 5cm or 10cm intervals, with the circuit intact after cutting. Available in single-color white (2200K to 6500K), red, blue, green, RGB, or RGBW configurations. Supports PWM dimming and remote, app, or voice control via Alexa and Google Assistant. Rated from IP20 to IP68 depending on the version, suitable for indoor and outdoor use. Input voltage is DC 12V or 24V, with LED quantity customizable per metre. The strip is 8-12mm wide and 2-3mm thick, available in standard lengths of 1m, 2m, 5m, 10m, or custom lengths.
Key Benefits
- High-brightness output from 5050 SMD LEDs suitable for large commercial and task lighting
- Full color range with 16 million combinations in RGB and RGBW models for dynamic effects
- Bendable at any angle up to 180 degrees, enabling installation on curved surfaces
- Cuttable at 5cm or 10cm intervals without damaging the circuit, allowing custom run lengths
- IP20 to IP68 protection levels available, supporting indoor, outdoor, and wet environments
- PWM dimming compatibility allows smooth brightness control without flicker
- RGB/RGBW models work with remote, app, or voice control systems like Alexa and Google Assistant
- Customizable LED quantity per metre to match brightness and power requirements
Problems It Solves
- Fixed-length strips force over-ordering or multiple joins; cuttable design allows exact run lengths
- Non-dimmable strips limit brightness control; PWM dimming enables smooth adjustment
- Standard strips lack color change capability; RGB/RGBW models support dynamic lighting
- Rigid strips cannot follow curves; bendable design fits curved surfaces without damage
- Low IP ratings fail in damp or outdoor environments; IP65/IP68 versions survive water exposure
- Low brightness limits use in large spaces; 5050 SMDs deliver higher output than smaller LEDs
- Lack of voice or app control reduces automation; compatible with Alexa and Google Assistant
Application Scenarios
- Stage lighting where high brightness and color changes are needed for performances
- Festival and event decoration requiring dynamic RGB effects and flexible installation
- Outdoor signage using waterproof versions (IP65/IP68) to withstand weather exposure
- Living rooms and party spaces using RGB/RGBW for mood lighting and entertainment
- Workshops and large commercial spaces needing high-brightness task lighting
- Architectural accents on curved walls, ceilings, or furniture with bendable design
- Retail displays using color-changing effects to highlight products or create visual interest
Who It Is For
- Lighting distributors sourcing flexible strips for event and stage markets
- Event planners needing RGB strips with remote or app control for temporary installations
- Retail and commercial contractors specifying high-brightness task lighting
- OEM brands integrating customizable strips into furniture or display units
- Project buyers requiring IP65 or IP68 versions for outdoor signage or wet locations
Engineering Detail
Technical Features
- 5050 SMD LEDs arranged for high brightness and color consistency
- Bendable at any angle up to 180 degrees without damaging the circuit
- Cuttable at 5cm or 10cm marked intervals with no risk of circuit failure
- Supports PWM dimming for flicker-free brightness control
- RGB/RGBW models compatible with remote, app, or voice control (Alexa/Google Assistant)
- Beam angle of 120 degrees for wide light spread
- Efficacy of 18-20 lumens per LED
- IP20 to IP68 protection levels depending on the version selected
Materials
- 5050 SMD LED packages for high brightness and color output
- Flexible PCB with 10mm width to carry the LED array
- Encapsulated circuit with solder joints and conductive traces
- Insulating and protective layer over the PCB for durability
- Optional waterproof coating or sleeve for IP65/IP68 versions
Specifications
Technical Data
Values taken from our product datasheet. Anything not listed here is confirmed per order.
| LED type | 5050 SMD |
|---|---|
| Model number | WK-FP5050-30D/60D/72D... |
| PCB width | 10mm |
| Input voltage | DC 12V / 24V |
| LED quantity | 30pcs / 60pcs / 72pcs / customizable |
| Power consumption | 7.2W / 14.4W / 17.2W / customizable |
| Color temperature | 2200K - 6500K (white), R/G/B, RGB, RGBW |
| CRI (Ra) | >80 / 90 |
| Beam angle | 120° |
| Lumens per LED | 18-20 lm |
| IP grade | IP20 / IP65 / IP66 / IP68 |
| Thickness | 2-3mm |
| Width | 8-12mm |
| Length | 1m / 2m / 5m / 10m / customizable |
| Cutting interval | 5cm / 10cm marked intervals |
Manufacturing Process
- LEDs mounted on flexible PCB at the specified density (30/60/72 per metre)
- PCB assembled and tested for continuity and electrical function
- Optional waterproofing applied for IP65/IP68 versions
- Strip cut to the requested length at 5cm or 10cm intervals
- Ends terminated with connectors or solder points as per order
- Final electrical and lighting test performed before packing
Quality Control
- Products are 100% tested before delivery
- Branded LED chips and high quality raw materials used on the production line
- Color temperature and CRI verified against the ordered specification
- IP rating tested according to the version selected (IP20 to IP68)
Customization Options
- LED quantity per metre customizable to match brightness and power needs
- Cut length and end termination to the buyer’s run drawing
- Color temperature from 2200K to 6500K, or RGB/RGBW for color-changing
- IP rating selected based on environment (IP20 for indoor, IP65/IP68 for outdoor/wet)
- Input voltage set to 12V or 24V depending on the driver and run length
Honest Comparison
How It Compares With the Alternatives
| PVC flexible strip | Silicone or polymer-based strips offer better UV and heat resistance, but this product uses standard flexible PCB with no encapsulation beyond the base layer |
|---|---|
| 3528 SMD strip | 5050 SMDs provide higher brightness and better color output than 3528, but consume more power and generate more heat |
| Fixed-length strip | This strip is cuttable at 5cm/10cm intervals, allowing exact run lengths without waste, unlike fixed-length models |
Use Guide
Getting the Best Out of It On Site
- Cut only at marked 5cm or 10cm intervals to avoid damaging the circuit
- Use 24V for runs longer than 5m to reduce voltage drop across the line
- Select IP65 or IP68 for outdoor or wet locations; IP20 is for dry indoor use only
- Use PWM dimmers for smooth brightness control without flicker
- For RGB/RGBW models, ensure the controller supports remote, app, or voice commands
- Avoid bending the strip beyond 180 degrees to prevent stress on the PCB
- Do not expose the strip to direct immersion in water unless rated IP68
Related Products
Others in This Range
Strip Light with 240pcs 3528 Smd Led
Its ultra-compact chip size (2.2×1.6mm) makes the light strip extremely thin and flexible, allowing it to bend freely...
View specifications →
Strip Light with 3528 Smd Led
The chip structure is simple and reliable, with low failure rates and wide compatibility with controllers and power...
View specifications →
Strip Light with 2216 Smd Led Double Color
Its ultra-compact chip size (2.2×1.6mm) makes the light strip extremely thin and flexible, allowing it to bend freely...
View specifications →
Strip Light with 2216 Smd Led
Its ultra-compact chip size (2.2×1.6mm) makes the light strip extremely thin and flexible, allowing it to bend freely...
View specifications →Where This Product Is Used
Technical Guides
Choosing Between 12V and 24V LED Strip Light
Compare 12V and 24V LED strip voltage drop, run length limits, driver compatibility, and current draw for commercial and
Read guide →SMD LED Types Compared 2835 3528 5050 and 2216
Compare SMD 2835, 3528, 5050, and 2216 LED types used in flexible strip lights. Learn which is best for space, brightnes
Read guide →IP20 IP65 IP67 and IP68 Explained for LED Strip and Fixtures
What each IP rating means for LED strips and fixtures. Which products have IP68, IP67, IP65, or IP20. Practical guidance
Read guide →Buyer Questions
Questions About Strip Light with 5050 Smd Led
What is the minimum order quantity?
Small order quantities are accepted. Send the run lengths and configuration you need and we will confirm the minimum for that setup.
Can the LED quantity and cut length be customized?
Yes. LED quantity per metre is customizable, and the strip is cut and terminated to your specified run lengths.
Which IP rating should I choose for outdoor use?
For outdoor or wet locations, select IP65 or IP68. IP20 is only for dry indoor environments.
Is this strip compatible with voice control?
Yes. RGB and RGBW models are compatible with remote, app, or voice control via Alexa and Google Assistant.
What voltage should I use for a 10m run?
For runs over 5m, use 24V DC to reduce voltage drop and maintain consistent brightness along the line.
Can I dim this strip?
Yes. It supports PWM dimming. Use a compatible dimmer to adjust brightness from 10% to 100%.
What payment methods do you accept?
Different payment methods are accepted. Confirm the terms with our sales team when the order is quoted.
Request a Quote for Strip Light with 5050 Smd Led
Send the quantity, colour temperature and any customisation you need. Our sales team will confirm the configuration, lead time and price.