Skip to content
Shenzhen Well King Lighting Co., Ltd. · LED lighting factory since 2009

IP20 IP65 IP67 and IP68 Explained for LED Strip and Fixtures

What each IP rating means for LED strips and fixtures. Which products have IP68, IP67, IP65, or IP20. Practical guidance on installation and use in wet or outdoor environments.

In this guide
  • What IP Ratings Mean in Practice
  • When IP67 and IP68 Are Required
  • Which Products Carry Which Ratings
  • How IP Rating Affects Installation and Use
  • Why Silicone Housing Enables High IP Ratings

What IP Ratings Mean in Practice

IP20 means no protection against dust or water. It is suitable only for dry, indoor environments with no risk of moisture or contact with hands or tools.

IP65 provides full dust protection and resistance to water jets from any direction. It is used on fixtures installed in areas with occasional splashes, such as kitchen backsplashes or outdoor covered patios.

When IP67 and IP68 Are Required

IP67 means the product is dust-tight and can withstand immersion in water up to 1 meter deep for 30 minutes. This rating is used on underwater LED strips and wall washers intended for swimming pools or fountains.

IP68 means the product is dust-tight and can be submerged continuously in water beyond 1 meter. It is used on strips designed for permanent underwater installation, such as in pools or decorative water features.

IP20 IP65 IP67 and IP68 Explained for LED Strip and Fixtures
Product from the range this guide covers

Which Products Carry Which Ratings

The silicone flexible LED strip range includes models with IP65, IP67, and IP68 ratings depending on the application. The underwater version is rated IP68.

The slim LED wall washer and adjustable retrofit downlights are available in IP67 and IP68 variants for outdoor or wet indoor use.

How IP Rating Affects Installation and Use

IP68-rated strips can be installed in full immersion without risk of damage. They are suitable for permanent underwater use in pools, fountains, or landscape water features.

IP65 and IP67 models are suitable for outdoor wall mounting, wet rooms, or areas with high humidity, but not for continuous submersion.

Why Silicone Housing Enables High IP Ratings

The integrated silicone encapsulation in these products forms a complete seal around the LED circuit board and connections. This prevents water and dust from entering the internal components.

The material is corrosion-resistant, UV-stable, and maintains flexibility even at low temperatures, which helps maintain the seal over time.

Buyer Questions

Questions on This Topic

Which products have IP68 rating?

The underwater LED silicone strip light and the silicone flexible wall washing strip with 2835 SMD LED are rated IP68. These are designed for permanent immersion in water.

Can IP65 or IP67 strips be used underwater?

No. IP65 and IP67 are not rated for continuous submersion. Only IP68-rated strips are suitable for underwater use in pools or fountains.

Is IP68 the same as waterproof?

IP68 means the product is dust-tight and can be submerged in water beyond 1 meter for extended periods. It is the highest level of protection against water and dust.

Do IP67 and IP68 strips require special connectors?

Yes. The connectors must be rated for the same IP level. Only IP67 or IP68 rated connectors should be used with these strips to maintain the full protection rating.

Can IP68 strips be cut and spliced?

Yes. The strips are cuttable and spliceable at pre-marked points. However, splicing must be done with IP68-rated connectors to maintain the waterproof seal.

Still Deciding on the Specification

Send us the application and we will tell you which option we would build for it.