Strip Light with 2216 Smd Led
Its ultra-compact chip size (2.2×1.6mm) makes the light strip extremely thin and flexible, allowing it to bend freely around narrow corners, curved surfaces, or small spaces (e.g., gaps in furniture, edge of thin displays).
Product Overview
A thin, flexible LED strip with 2216 SMD chips designed for tight spaces and curved surfaces where standard strips cannot fit. The 2.2×1.6mm chip size enables a profile thickness of 2-3mm, allowing installation in narrow gaps, behind thin displays, or along the edges of furniture. It is cuttable at 5cm or 10cm intervals and can be bent at any angle up to 180 degrees without damaging the circuit. Available in 5mm, 8mm, or 10mm widths with 60 to 300 LEDs per metre, it operates on 12V or 24V DC and supports PWM dimming. IP20 to IP68 protection levels allow use in dry, damp, or fully submerged environments depending on the version selected.
Key Benefits
- 2.2×1.6mm chip size enables a 2-3mm profile thickness for tight space installation
- Bendable at any angle up to 180 degrees for curved surfaces and narrow corners
- Cuttable at 5cm or 10cm intervals without damaging the circuit or affecting performance
- Available in 5mm, 8mm, or 10mm widths to match different mounting constraints
- 60 to 300 LEDs per metre allows brightness adjustment to the project’s needs
- IP20 to IP68 protection levels cover dry, damp, and fully submerged environments
- 12V or 24V DC input supports both short runs and longer continuous installations
- PWM dimming compatible with standard dimmers for adjustable brightness control
Problems It Solves
- Standard LED strips are too thick to fit in narrow gaps or behind thin panels
- Fixed cut intervals or rigid profiles prevent installation on curved or irregular surfaces
- Lack of flexibility leads to visible gaps or forced straight runs in curved designs
- High-profile strips cannot be hidden in thin display edges or furniture joints
- Inconsistent brightness across runs due to fixed LED density and no customization
- No option for IP68 in small-profile strips for fully submerged or washdown environments
Application Scenarios
- Under-cabinet lighting in kitchen drawers or narrow shelves where space is limited
- Edge lighting on thin electronic devices, such as tablets, monitors, or audio equipment
- Hidden lighting in furniture gaps, such as between cabinet panels or behind display frames
- Curved surface lighting on rounded furniture, shelves, or display cases
- Ambient lighting in tight spaces like behind thin LED panels or inside thin wall cavities
- Low-brightness decorative lighting in display cases or showcase edges
- Installation in damp environments like bathrooms or kitchens with IP65 or higher protection
Who It Is For
- Electrical wholesalers sourcing thin LED strips for compact lighting applications
- OEM brands integrating LED strips into thin consumer electronics or furniture
- Lighting contractors installing hidden or curved lighting in tight architectural spaces
- Distributors stocking flexible strips for DIY or retail projects with space constraints
- Project buyers needing a cuttable, bendable strip for non-standard shapes or tight gaps
Engineering Detail
Technical Features
- 2216 SMD LED chip size of 2.2×1.6mm for ultra-compact profile
- Profile thickness of 2-3mm for installation in tight spaces
- Bendable at any angle up to 180 degrees without circuit damage
- Cuttable at 5cm or 10cm marked intervals with no impact on functionality
- LED quantity per metre customizable from 60 to 300
- Available in 5mm, 8mm, or 10mm PCB widths
- Input voltage DC 12V or 24V
- PWM dimming compatible with standard dimmers
- IP20 to IP68 protection level depending on version
- Beam angle 120 degrees for wide, even light spread
- Lumens per LED 7-8 lm
- Power consumption per metre 3.8W to 21W depending on LED count
Materials
- 2216 SMD LED packages with 2.2×1.6mm chip size
- Flexible PCB substrate with 5mm, 8mm, or 10mm width options
- Solder pads and conductive traces for circuit continuity
- Encapsulant or coating material depending on IP rating (IP20 to IP68)
Specifications
Technical Data
Values taken from our product datasheet. Anything not listed here is confirmed per order.
| LED type | 2216 SMD |
|---|---|
| Model number | WK-FP2216-60D/120D/180D/240D/300D |
| PCB width | 5mm / 8mm / 10mm |
| Input voltage | DC 12V / 24V |
| LED quantity | 60 / 120 / 180 / 240 / 300 per metre |
| Power consumption | 3.8W / 9.6W / 14.4W / 19.2W / 21W per metre |
| Colour temperature | 2200-6500K, single colour |
| CRI (Ra) | >80 / 90 / 95 |
| Beam angle | 120° |
| Lumens per LED | 7-8 lm |
| IP grade | IP20 / IP65 / IP66 / IP68 |
| Thickness | 2-3mm |
| Width | 5mm / 8mm / 10mm |
| Length | 1m / 2m / 5m / 10m (customizable) |
Manufacturing Process
- LEDs mounted on flexible PCB at the selected density (60 to 300 per metre)
- PCB cut to the required length (1m, 2m, 5m, 10m or custom)
- Cutting performed at 5cm or 10cm marked intervals to preserve circuit integrity
- IP rating applied based on customer specification (IP20 to IP68)
- Electrical and lighting test performed on each run before packing
Quality Control
- Products are 100% tested before delivery
- Branded LED chips and high quality raw materials used on the production line
- LED density, voltage, and IP rating verified against the order specification
- Cut points tested to ensure no circuit damage after separation
Customization Options
- LED quantity per metre set to 60, 120, 180, 240, or 300 based on brightness needs
- PCB width selected from 5mm, 8mm, or 10mm to match the installation space
- Cut length and cut interval (5cm or 10cm) specified by the buyer
- IP rating selected from IP20, IP65, IP66, or IP68 depending on environment
- Colour temperature from 2200K to 6500K single colour, or red, blue, green, etc.
- Input voltage chosen as 12V or 24V DC based on driver availability
Honest Comparison
How It Compares With the Alternatives
| Standard 5050 SMD strip | 2216 is thinner and more flexible, suitable for tighter spaces where 5050 cannot fit |
|---|---|
| PVC-coated strip | 2216 strip has a thinner profile and better bendability, but PVC may offer higher IP ratings in some cases |
| Fixed-length strip with no cut marks | This strip is cuttable at 5cm or 10cm intervals, allowing on-site adjustment without waste |
Use Guide
Getting the Best Out of It On Site
- Use 24V DC for runs longer than 5m to reduce voltage drop
- Ensure cut points are made only at the marked intervals to avoid circuit damage
- Avoid bending the strip beyond 180 degrees at any single point to prevent stress on the PCB
- Select IP65 or higher for damp or washdown environments such as kitchens or bathrooms
- Use a PWM dimmer compatible with 12V or 24V DC for smooth brightness control
- For fully submerged applications, confirm IP68 version is selected and connections are sealed
Related Products
Others in This Range
Strip Light with 240pcs 3528 Smd Led
Its ultra-compact chip size (2.2×1.6mm) makes the light strip extremely thin and flexible, allowing it to bend freely...
View specifications →
Strip Light with 3528 Smd Led
The chip structure is simple and reliable, with low failure rates and wide compatibility with controllers and power...
View specifications →Strip Light with 2216 Smd Led Double Color
Its ultra-compact chip size (2.2×1.6mm) makes the light strip extremely thin and flexible, allowing it to bend freely...
View specifications →
Strip Light with 120pcs 5050 Smd Led
The preferred choice for high-brightness and RGB color-changing scenarios. Color Options: Single-color (white...
View specifications →Where This Product Is Used
Technical Guides
Choosing Between 12V and 24V LED Strip Light
Compare 12V and 24V LED strip voltage drop, run length limits, driver compatibility, and current draw for commercial and
Read guide →SMD LED Types Compared 2835 3528 5050 and 2216
Compare SMD 2835, 3528, 5050, and 2216 LED types used in flexible strip lights. Learn which is best for space, brightnes
Read guide →IP20 IP65 IP67 and IP68 Explained for LED Strip and Fixtures
What each IP rating means for LED strips and fixtures. Which products have IP68, IP67, IP65, or IP20. Practical guidance
Read guide →Buyer Questions
Questions About Strip Light with 2216 Smd Led
What is the minimum order quantity?
Small order quantities are accepted. Send the run lengths, width, and IP rating you need, and we will confirm the minimum for that configuration.
Can the strip be cut at custom intervals?
No. It is cuttable only at 5cm or 10cm marked intervals to preserve circuit integrity.
Is this strip suitable for underwater use?
Yes, when ordered with IP68 protection, it is suitable for fully submerged applications.
What is the maximum bend angle?
The strip can be bent at any angle up to 180 degrees without damaging the circuit.
Can the LED density be customized?
Yes. LED quantity per metre can be set to 60, 120, 180, 240, or 300 based on the required brightness.
What voltages are available?
12V and 24V DC are both available. 24V is recommended for longer runs to reduce voltage drop.
What payment methods do you accept?
Different payment methods are accepted. Confirm the terms with our sales team when the order is quoted.
Request a Quote for Strip Light with 2216 Smd Led
Send the quantity, colour temperature and any customisation you need. Our sales team will confirm the configuration, lead time and price.