LED Specification Guides
Seven guides covering the decisions that actually change what gets delivered: voltage, IP rating, CRI, beam angle, dimming protocol, LED package and encapsulation.
Understanding CRI Ra 80 90 and 95 in LED Lighting
What CRI Ra measures, where Ra>90 and Ra>95 are worth specifying, and how CRI trades against efficacy above 90 lm/W on LED strip and downlights.
Read guide →IP20 IP65 IP67 and IP68 Explained for LED Strip and Fixtures
What each IP rating means for LED strips and fixtures. Which products have IP68, IP67, IP65, or IP20. Practical guidance on installation and use in we
Read guide →
Choosing Between 12V and 24V LED Strip Light
Compare 12V and 24V LED strip voltage drop, run length limits, driver compatibility, and current draw for commercial and residential lighting applicat
Read guide →
How to Choose LED Beam Angle 15 24 36 and 50 Degrees
How to select the right beam angle for LED spot lights, downlights, and wall washers based on ceiling height and target surface size. Includes beam an
Read guide →Silicone Encapsulated Neon Flex for Wet and Outdoor Installations
Silicone neon flex offers IP68 waterproofing, UV resistance, and superior flexibility for underwater and outdoor applications. Compare with PVC for du
Read guide →
LED Dimming Compared Triac DALI 0-10V and PWM
Which dimming protocols are supported on your LED downlights, spot lights, and silicone flexible strips. Triac, DALI, 0-10V, and PWM explained for ret
Read guide →SMD LED Types Compared 2835 3528 5050 and 2216
Compare SMD 2835, 3528, 5050, and 2216 LED types used in flexible strip lights. Learn which is best for space, brightness, and thermal performance.
Read guide →Buyer Questions
About the Knowledge Center
Who writes these guides?
They are written from our own product data by the team that builds the fixtures, so every figure quoted matches a datasheet on this site.
Can you advise on a specification before we order?
Yes. Send the application and the constraint you are working to and our engineers will tell you what we would specify.
Do the guides cover installation?
They cover the decisions made before installation: voltage, IP rating, CRI, beam angle, dimming protocol and LED package choice.
Ask an Engineer Directly
If the guide does not answer it, message us. We answer specification questions before there is an order on the table.