Indicating Life Signals and Caring for People's Health
Short Cable SpO2 Sensors for Use With Extension Adapter Cables - Trumor Ltd

Short Cable SpO2 Sensors for Use With Extension Adapter Cables

Short-cable probes designed to plug into an SpO2 extension adapter rather than straight into the monitor.

20 products

Every Short SpO2 Sensor We Make

SpO2 Sensor 16 Pin for Nonin WristOx2 K0336 Series 0.3M with 16 pin male connector manufactured by Trumor Ltd

SpO2 Sensor 16 Pin for Nonin WristOx2 K0336 Series 0.3M

16 Pin Male · 0.3M or Customized
SpO2 Sensor 11 Pin for Masimo M-LNCS K0240 Series 0.9M with 11 pin male connector manufactured by Trumor Ltd

SpO2 Sensor 11 Pin for Masimo M-LNCS K0240 Series 0.9M

11 Pin Male · 0.9M or Customized
SpO2 Sensor 8 Pin for Masimo LNOP K0261 Series 0.9M with 8 pin male connector manufactured by Trumor Ltd

SpO2 Sensor 8 Pin for Masimo LNOP K0261 Series 0.9M

8 Pin Male · 0.9M or Customized
SpO2 Sensor 6 Pin for Novametrix K0204 Series 0.9M with 6 pin male connector manufactured by Trumor Ltd

SpO2 Sensor 6 Pin for Novametrix K0204 Series 0.9M

6 Pin Male · 0.9M or Customized
SpO2 Sensor 6 Pin for Novametrix K1101 Series 0.9M with 6 pin male connector manufactured by Trumor Ltd

SpO2 Sensor 6 Pin for Novametrix K1101 Series 0.9M

6 Pin Male · 0.9M or Customized
SpO2 Sensor 6 Pin for MEK K0133 Series 0.9M with 6 pin male connector manufactured by Trumor Ltd

SpO2 Sensor 6 Pin for MEK K0133 Series 0.9M

6 Pin Male · 0.9M or Customized
SpO2 Sensor 6 Pin for Konica Minolta K0168 Series 0.9M with 6 pin male connector manufactured by Trumor Ltd

SpO2 Sensor 6 Pin for Konica Minolta K0168 Series 0.9M

6 Pin Male · 0.9M or Customized
SpO2 Sensor 9 Pin for Newtech GMI K2145 Series 0.9M with 9 pin male connector manufactured by Trumor Ltd

SpO2 Sensor 9 Pin for Newtech GMI K2145 Series 0.9M

9 Pin Male · 0.9M or Customized
SpO2 Sensor 9 Pin for Dolphin K1170 Series 0.9M with 9 pin male connector manufactured by Trumor Ltd

SpO2 Sensor 9 Pin for Dolphin K1170 Series 0.9M

9 Pin Male · 0.9M or Customized
SpO2 Sensor 8 Pin for Datex Ohmeda K0107 Series 0.9M with 8 pin male connector manufactured by Trumor Ltd

SpO2 Sensor 8 Pin for Datex Ohmeda K0107 Series 0.9M

8 Pin Male · 0.9M or Customized
SpO2 Sensor 9 Pin for BCI K0102 Series 0.9M with 9 pin male connector manufactured by Trumor Ltd

SpO2 Sensor 9 Pin for BCI K0102 Series 0.9M

9 Pin Male · 0.9M or Customized
SpO2 Sensor Rd Set for Masimo K3166 Series 0.9M with rd set connector manufactured by Trumor Ltd

SpO2 Sensor Rd Set for Masimo K3166 Series 0.9M

RD SET · 0.9M or Customized
SpO2 Sensor 9 Pin for Masimo K2131 LNCS Series 0.9M with 9 pin male connector manufactured by Trumor Ltd

SpO2 Sensor 9 Pin for Masimo K2131 LNCS Series 0.9M

9 Pin Male · 0.9M or Customized
SpO2 Sensor 6 Pin for Masimo LNOP K1131 Series 0.9M with 6 pin male connector manufactured by Trumor Ltd

SpO2 Sensor 6 Pin for Masimo LNOP K1131 Series 0.9M

6 Pin Male · 0.9M or Customized
SpO2 Sensor 9 Pin for Biolight K0228 Series 0.9M with 9 pin male connector manufactured by Trumor Ltd

SpO2 Sensor 9 Pin for Biolight K0228 Series 0.9M

9 Pin Male · 0.9M or Customized
SpO2 Sensor 7 Pin for Ninon K0149 Series 0.9M with 7 pin male connector manufactured by Trumor Ltd

SpO2 Sensor 7 Pin for Ninon K0149 Series 0.9M

7 Pin Male · 0.9M or Customized
SpO2 Sensor 9 Pin for Nihon Kohden K1173 Series 0.9M with 9 pin male connector manufactured by Trumor Ltd

SpO2 Sensor 9 Pin for Nihon Kohden K1173 Series 0.9M

9 Pin Male · 0.9M or Customized
SpO2 Sensor 9 Pin for Datex Ohmeda K0215 Series 0.9M with 9 pin male connector manufactured by Trumor Ltd

SpO2 Sensor 9 Pin for Datex Ohmeda K0215 Series 0.9M

9 Pin Male · 0.9M or Customized
SpO2 Sensor 9 Pin for Nellcor DS-100A K0144 Series 0.9M with 9 pin male connector manufactured by Trumor Ltd

SpO2 Sensor 9 Pin for Nellcor DS-100A K0144 Series 0.9M

9 Pin Male · 0.9M or Customized
SpO2 Sensor 7 Pin for Nellcor K0145 Series 0.9M with 7 pin male connector manufactured by Trumor Ltd

SpO2 Sensor 7 Pin for Nellcor K0145 Series 0.9M

7 Pin Male · 0.9M or Customized
The Problem

What This Category Is For

In a two-part system the expensive half is the extension cable that stays with the monitor, and the half that gets damaged is the probe on the patient. Short sensors let you replace only the damaged probe, so the cost of a drop or a crushed clip is a fraction of a full one piece sensor.

Key Benefits

Why Buyers Choose This Range

  • Replace the probe not the whole assembly

    The extension adapter stays connected to the monitor; only the short probe is consumed.

  • Lower cost per replacement

    Less cable and no monitor connector means a cheaper spare to hold on the ward trolley.

  • Same probe styles as the one piece range

    Finger clip, silicone soft tip, neonatal wrap, Y type and ear clip variants share the part numbering used across our SpO2 line.

  • Shorter cable in tight spaces

    Suits transport, dental chairs and bedside rails where a 3M cable becomes a trip and tangle hazard.

Application

Where These Are Used

  • Wards already standardised on extension adapters
  • Transport and ambulance monitors
  • Day surgery and dental
  • High-turnover departments replacing probes often
Compatibility

Monitor Brands Covered in This Category

Taken from the compatibility tables of the 20 products below. Open a product to see the exact monitor models.

  • BCI
  • Biocare
  • Biolight
  • Bionet
  • Biosys
  • CAS Med
  • Choice
  • Colin
  • Criticare
  • Critikon
  • Datascope
  • Datex
  • Digicare
  • Dolphin
  • Draeger
  • Edan
  • Fukuda
  • GE
  • Goldway
  • Healthdyne
  • Hellige
  • Huntleigh
  • Infinium
  • Invivo
  • Konica Minolta
  • MEK
  • Masimo
  • Meditech
  • Medtronic
  • Mennen
  • Mortara
  • Nellcor
  • Nihon Kohden
  • Nonin
  • Novametrix
  • Philips
  • ResMed
  • Respironics
  • Schiller
  • Siemens
  • Smiths
  • SpO2 Sensor
  • Spacelabs
  • Suntech
  • Welch Allyn
  • Zoll
Quality

Every Item in This Category Passes Three Inspection Stages

IQC on incoming connectors, wires, cables and terminals; IPQC across cutting, stripping, crimping, injection and assembly; OQC on packing, labelling, dimensions and electrical performance.

FAQ

Questions About Short SpO2 Sensors

Do short sensors work without an adapter cable

No. A short sensor terminates in a sensor-side connector and needs the matching SpO2 adapter cable to reach the monitor.

Which adapter do I need with it

The adapter is chosen by your monitor, not by the probe. Our SpO2 Adapters category lists adapters by monitor manufacturer and pin count.

How long is a short sensor cable

Typically under 1 metre. The exact figure is in the specification table on each product page.

Can I order short sensors and adapters together

Yes, they ship on one order. Tell us the monitor model and we will confirm the matching pair.

Are they reusable

These are reusable sensors, cleaned and disinfected between patients under your own protocol. For single-patient-use items see Disposable SpO2 Sensors.

Quote the Exact Part You Need

Send the monitor brand, model and connector pin count and we will confirm the part number from this category and price it.