SpO2 Sensor 9 Pin for Newtech GMI K2145 Series 0.9M
SpO2 Sensor 9 Pin for Newtech GMI K2145 Series 0.9M is a reusable SpO2 sensor with a 9 pin male connector and a 0.9M cable, built for Newtech GMI monitors.
- Model NoTM-K2145AF-S / TM-K2145AS-S / TM-K2145PF-S (+5 more)
- Connector9 Pin Male
- Cable Length0.9M or Customized
- SpO2 TechnologyDigital
- ColourGray or Blue
- Monitor BrandsMeditech
- Warranty6 months
- CertificationISO 13485 quality system, CE, FDA compliance
- CustomisationOEM and ODM available
Samples, datasheets and certificate copies are sent on request. Tell us the monitor model you are fitting.
Product Overview
It is documented as compatible with monitors from Meditech, with the exact monitor models listed in the compatibility table below. The series carries 8 part numbers covering finger clip, silicone soft tip, neonatal silicone wrap, multi-site Y type, ear clip and veterinary animal clip variants in adult, pediatric and neonatal sizes. The sensor uses Digital SpO2 technology, which is the technology the listed monitors expect. Standard housing colour is gray or blue. Warranty is 6 months.
These are SpO2 Sensors 9 Pin compatible for GMI, Newtech.
Problems It Solves
In a two-part system the expensive half is the extension cable that stays with the monitor, and the half that gets damaged is the probe on the patient. Short sensors let you replace only the damaged probe, so the cost of a drop or a crushed clip is a fraction of a full one piece sensor.
For this item specifically: the part exists so a Newtech GMI monitor already in service can keep being used when its original probe is damaged or discontinued.
Who It Is For
This part suits departments monitoring adult, pediatric and neonatal patients, anyone running Newtech GMI monitors and distributors holding stock against a mixed monitor fleet.
- Wards already standardised on extension adapters
- Transport and ambulance monitors
- Day surgery and dental
- High-turnover departments replacing probes often
Specifications
Every figure below is taken from the product documentation for this item. Where a value is not published we mark it TBC rather than estimating it.
| Name | SpO2 Sensor |
|---|---|
| Instrument Connector | 9 Pin Male |
| Length | 0.9M or Customized |
| Color | Gray or Blue |
| SpO2 Tech | Digital |
| Latex-Free | Yes |
| Sterile | No |
| Warranty | 6 months |
Model Numbers in This Series
Every variant below is a separate part number within the same series. Quote the code that matches the patient size and probe style you need.
| Model No | Description |
|---|---|
TM-K2145AF-S | Adult Finger Clip SpO2 Sensor |
TM-K2145AS-S | Adult Silicone Soft Tip SpO2 Sensor |
TM-K2145PF-S | Pediatric Finger Clip SpO2 Sensor |
TM-K2145PS-S | Pediatric Silicone Soft Tip SpO2 Sensor |
TM-K2145NW-S | Neonatal Silicone Wrap SpO2 Sensor |
TM-K2145MS-S | Multi-Site Y Type SpO2 Sensor |
TM-K2145VS-S | Veterinary Animal Clip SpO2 Sensor |
TM-K2145AE-S | Adult Ear Clip SpO2 Sensor |
Monitor Compatibility
This part is built for the monitors listed below, taken from our product documentation. A matching plug shape alone does not guarantee a matching signal, so confirm your exact model here before ordering.
| Meditech | Inc (GMI) G1A |
|---|
Quality Control
This part is produced under our ISO 13485 quality management system with compliance to CE Mark and FDA regulations. It passes three inspection stages: IQC on the incoming connectors, wires, cables and terminals; IPQC through cutting, stripping, crimping, injection and assembly; and OQC on packing, labels, marks, appearance, dimensions and electrical performance before it is released.
Customisation Options
Cable length on this item is stated as 0.9M or Customized, so a non-standard length can be quoted. Under our OEM and ODM service the product features, branding, packaging and labelling are customised, and we handle the regulatory documentation for your target market.
Comparison With the Alternatives
Against a one piece sensor, this short build costs less to replace because the extension adapter stays on the monitor, at the price of one extra connection in the chain. Against a disposable sensor it is reusable but needs cleaning between patients.
Use Guide
- Confirm the monitor manufacturer and model against the compatibility table above.
- Check the connector on the monitor matches 9 Pin Male.
- Choose the patient size and probe style from the model table, then quote that part number.
- Apply the sensor to a clean, well-perfused site and keep the emitter and detector aligned opposite each other.
- Rotate the measurement site regularly on long recordings to protect skin integrity.
- Between patients, clean and disinfect reusable items under your own protocol; discard single-patient-use items.
What This Range Gives You
Replace the probe not the whole assembly
The extension adapter stays connected to the monitor; only the short probe is consumed.
Lower cost per replacement
Less cable and no monitor connector means a cheaper spare to hold on the ward trolley.
Same probe styles as the one piece range
Finger clip, silicone soft tip, neonatal wrap, Y type and ear clip variants share the part numbering used across our SpO2 line.
Shorter cable in tight spaces
Suits transport, dental chairs and bedside rails where a 3M cable becomes a trip and tangle hazard.
Related Products
Other parts from the same category, often quoted alongside this one.
Questions About This Product
Which monitors does SpO2 Sensor 9 Pin for Newtech GMI K2145 Series 0.9M fit
It is documented for monitors from Meditech. The compatibility table on this page lists the exact model names. If your model is not there, send it to us with a photo of the monitor socket.
What connector does it use
The instrument connector is 9 Pin Male, on a 0.9M or Customized cable.
Which part number should I quote
The series has 8 part numbers. Pick the one matching the patient size and probe style you need from the model table above, and quote that code.
What warranty applies
6 months, as stated in the specification table for this item.
Do short sensors work without an adapter cable
No. A short sensor terminates in a sensor-side connector and needs the matching SpO2 adapter cable to reach the monitor.
Which adapter do I need with it
The adapter is chosen by your monitor, not by the probe. Our SpO2 Adapters category lists adapters by monitor manufacturer and pin count.
Can this be supplied under our own brand
Yes. OEM and ODM covers product features, branding, packaging and labelling, with the regulatory documentation handled for your market.
Quote SpO2 Sensor 9 Pin for Newtech GMI K2145 Series 0.9M
Tell us the quantity and the monitor model you are fitting and we will confirm the part number and price.