Verified to 1000 h neutral salt spray — architectural LED built for coastal projects

Home/Products

Product centre

Six families built on one outdoor housing programme. The wattages, beam angles and colour temperatures below are the standard options — non-standard combinations are routine, so ask rather than assume.

01 — Floodlights

LED Floodlights

Architectural, pole, large-area, billboard, narrow-beam and colour-changing floodlights — the workhorse family for facade and site lighting.

Full datasheet 10W RGBW colour changing narrow beam LED floodlight

10 W RGBW Narrow Beam Floodlight

RF remote control, colour changing, narrow beam for tall facade elements, columns and feature walls.

IP65RGBWCoastal spec
View specification
Architectural LED floodlight lighting a building facade

15 W RGBW Floodlight / Spotlight

AC100–240 V direct mains with RF remote control, IP67 — for exposed positions and combined wash-and-accent duty.

IP67AC100–240 VRGBW
RGB and RGBW LED wall washer floodlights

24 / 36 / 54 W 4-in-1 RGBW Floodlight

AC100–240 V with a 4-in-1 RGBW chip and RF remote, IP65 — full-colour facade schemes without an external driver box.

IP6524–54 W4-in-1
Large area LED display sign floodlight installation

20–120 W Display & Sign Floodlight

Arm-mounted floodlight for billboards, signage and large-area lighting, IP66, in seven wattage steps.

IP6620–120 WArm mount
Square CREE COB LED landscape spot light

10 / 12 / 20 W Square COB Spot

CREE COB landscape and garden spot, IP65, square housing — tree uplighting, planting beds and low-level accent.

IP65CREE COB10–20 W
Salt resistant coastal LED floodlight

Coastal-specification housings

Any floodlight in this family can be ordered on the housing and finish specification verified to 1000 hours of neutral salt spray.

1000 h salt sprayMade to order
See the test scope

02 — Ambient & accent

Ambient & Accent Lighting

Wall lamps, wall washers, garden spots, in-ground uplights, step lights and underwater fixtures — the landscape and podium-level toolkit.

10W 15W architectural outdoor wall light

10 / 15 W Architectural Wall Light

Surface-mounted outdoor wall light for commercial and residential security and amenity lighting, IP65.

IP65Surface mount
12W 14W 20W up and down architectural wall light

12 / 14 / 20 W Up-Down Wall Light

CREE LED with direct and indirect distribution in one body — the standard facade rhythm fixture for entrances and corridors.

IP65Up / downCREE
14W 20W 32W round single direction wall downlight

14 / 20 / 32 W Single-Direction Downlight

Round architectural wall downlight, single direction, IP65 — a clean scallop on walls and soffits.

IP6514–32 W
LED garden spot light with spike mount

Garden spots & in-ground uplights

Spike, surface and recessed in-ground formats for planting, tree and hardscape uplighting. Drive-over versions on request.

IP65 / IP67Spike / recessed
Linear LED wall washer light

Linear wall washers

RGB and RGBW linear wall washers under DMX512 control for even facade grazing and colour scenes.

DMX512RGB / RGBW
Step and underwater lighting for waterside areas

Step lights & underwater

Recessed step and wall markers, plus IP68 underwater fixtures for pools, fountains and water features.

StepIP68 underwater

03 — Control

Control Systems, Dimmers & Accessories

The layer most facade projects decide last and regret first. Pick the control method, then the fixtures.

4 channel DMX512 RDM decoder

4-Channel DMX Decoder (RDM)

Constant voltage DC12–48 V, four channels, RDM addressing — the standard decoder behind RGBW strip and wall-washer runs.

DC12–48 VRDM4 ch
RGB RGBW RGB+CCT 3-in-1 DMX512 master controller

3-in-1 DMX512 Master Controller

Drives RGB, RGBW and RGB+CCT systems from one master, with optional Tuya WiFi and voice control.

DMX512Tuya WiFi
Dual knob constant voltage LED dimmer with breathing mode

Dual-Knob CV Dimmer

Two-knob constant voltage dimmer with breathing mode and an optional wireless remote — for tunable white and simple accent circuits.

DC12–24 VBreathing mode
Control options at a glance
Control methodBest forTypical fixturesNotes
DMX512 / RDMFacade schemes, colour scenes, long runsWall washers, RGBW floodlights, stripAddressable; RDM removes most commissioning guesswork
Constant-voltage dimmingCove, accent, tunable whiteStrip, neon, wall lightsKnob or remote, breathing mode available
RF remoteSmall sites, retrofit, no data cablingRGBW floodlights and spotsGroup control without a cable run
Casambi (Bluetooth)Retail interiors, phased fit-outsMotorised-zoom track spotsApp commissioning, no gateway required
Tuya WiFi / voiceResidential and light commercialControllers, strip systemsApp and voice assistant support

04 — Linear

Strip & Neon

Silicone flexible strip and neon profile for cove, cornice, handrail and signage detail.

Flexible LED neon strip light for signage

18 W/m Wall Wash Strip — 30°

DC24 V, IP65, 30° optic for an even wash out of a shallow cove.

DC24 VIP6530°
Silicone flexible wall washer stripe light

24 W/m Silicone Wall Washer — 25×45°

DC24 V, IP65, asymmetric 25×45° optic in a silicone body for tight-offset grazing and exterior runs.

DC24 VIP6525×45°

05 — Interior

Commercial Lighting

Track, magnetic track, recessed and surface ceiling luminaires for retail and hospitality interiors.

Track spot lighting in a commercial interior

20 / 30 / 40 W Motorised-Zoom Track Spot

3-phase track head with motorised zoom and Casambi dimming — beam angle adjusted from the app after the scaffold has gone.

3-phaseCasambiZoom
Track wall washer light head

20 / 36 W Track Wall Washer

Dimmable, tunable white wall washer head for gallery walls and merchandise backdrops.

Tunable whiteDimmable
Recessed and surface mounted ceiling lights

48 V magnetic track & ceiling range

48 V magnetic track modules plus recessed and surface-mounted ceiling luminaires and spot / bulb lamps.

48 VMagneticRecessed

06 — OEM

LED Modules & Custom Builds

Modules and sub-assemblies for signage and custom enclosures, plus full ODM work.

  • OEM: our fixture, your branding, packaging and manual.
  • ODM: your housing design — we handle optics, thermal, driver selection and assembly.
  • Modules: constant-voltage LED modules for channel letters, light boxes and custom profiles.
  • Sampling: samples before tooling, with photometric data on request.
LED control hardware assembly

Next step

Send the project, not just the part number.

Mounting height, throw distance, colour temperature, control method and distance from the sea — give us those and you get a fixture schedule and a price, usually within one working day.

WhatsApp Email Phone Request a quote
WhatsApp Email Request a quote