Polished Gold Cube Perfume Cap
Polished Gold Cube Perfume Cap is a clean cube for minimal bottle designs where the cap must not add ornament.
- Flat faces with sharp defined edges
- Mirror polished electroplated surface
- Stepped base that centres the cap on the neck
Made in Dongguan, Guangdong. OEM and ODM, 8 to 12 weeks typical lead time.
Product Overview
A square body with sharp arrises and a polished gold surface on a stepped base. Flat faces on a polished finish are the hardest surface to produce cleanly, because any polishing mark shows across the whole face.
Polished Gold Cube Perfume Cap is produced on the same tooling, decoration and assembly lines as the rest of the perfume caps range, which is what allows its finish to be matched to other parts in your packaging set rather than approximated.
Technical Features
- Body – Zinc alloy exterior with an injection moulded plastic inner
- Construction – Cast zinc alloy
- Finish routes – Electroplating, Anodising, Spray coating, Brushing, Engraving
- Logo treatments – Engraved, Embossed, Laser marked, Printed
Specifications
| Material | Zinc alloy exterior with an injection moulded plastic inner |
|---|---|
| Construction | Cast zinc alloy |
| Surface finishes | Electroplating, Anodising, Spray coating, Brushing, Engraving |
| Logo treatments | Engraved, Embossed, Laser marked, Printed |
| Colour development | Matched to a Pantone reference or a physical sample |
| Tooling | Dedicated tool per shape |
| Bottle compatibility | Developed against your neck finish, TBC per project |
Values marked TBC are confirmed per project against your own bottle or brief.
Problems It Solves
Plating defects read as a cheap bottle
Flow marks and thin edges appear on the part the customer picks up first. Plating runs in house, so a defect is a process correction rather than a supplier conversation.
The inner grips unevenly
A cap that fits three necks out of four is a line stoppage at the filler. The moulded inner is engineered against your neck finish.
Batch two does not match batch one
Colour drift between runs is a tooling and process issue. Batch numbers across cartons and components let a drift be traced to its run.
Who It Is For
- Bottle makers and fillers who need a closure matched to a specific neck finish
- Fragrance brands developing a new bottle where the cap carries the identity
- Attar and oud houses presenting fragrance as an object
- Beauty packaging distributors serving several brands from one tool
Customisation
- Electroplating, anodising, spray coating, brushing and engraving
- Colour developed to a Pantone reference or a physical sample
- Logo engraved, embossed, laser marked or printed
- Custom shapes developed from your 3D model or a reference piece
Quality Control
- Incoming inspection on alloy and plastic materials
- Dimensional checks on critical assembly tolerances during the run
- Appearance inspection on plated and coated surfaces
- Final inspection on fit, appearance and packing before shipment
How It Compares
A square body with sharp arrises and a polished gold surface on a stepped base. Flat faces on a polished finish are the hardest surface to produce cleanly, because any polishing mark shows across the whole face.
If this is not the right fit, the nearest alternatives in the range are listed below; they share the same manufacturing route, so switching between them changes the product without changing the supplier.
Use Guide
- Confirm the neck finish and thread or snap detail of your bottle.
- Send a bottle sample so the inner can be engineered against the real part.
- Approve the finish on a physical sample under your own lighting, not on a screen.
- Release to production once the colour and logo references are signed off.
Polished Gold Cube Perfume Cap Questions
What is the minimum order quantity for the Polished Gold Cube Perfume Cap?
The quantity break depends on the finish and the decoration rather than on a single fixed number. Send this product name through WhatsApp and we will give you the figure that applies to the finish you want.
Can this be produced in our own colour?
Yes. Colour is developed against a Pantone reference or a physical sample you send, and the approved reference is reused on any matching parts in your range.
What is the lead time?
Typical project lead time is 8 to 12 weeks from brief to shipment. A repeat order on this tooling is shorter, because development and colour approval are already complete.
Can we put our logo on it?
Yes. Engraving, embossing, laser marking and printing are all applied in house as part of the same production run.
Is it tested before shipment?
Every unit is leak tested before packing, and appearance, function and packaging are verified at final inspection. Third-party inspection including SGS is supported on request.
Quote the Polished Gold Cube Perfume Cap
Send your target quantity, finish and any bottle details. Quotations come back within 24 hours.