Super Fulvic Acid 90% — High-Purity Grade For Foliar And Hydroponic Use
A high-purity fulvic grade at ≥ 90% active content on a dry basis, tested by the same method as the 50% grade, for formulators who need more active per kilogram of finished product.
- Active Fulvic Content≥ 90% (dry basis)
- Indicative Use (foliar)0.5 – 2 g/L
- Indicative Use (hydroponic)1 – 3 kg/ha
- Packaging25 kg / 20 kg kraft bags
- SupplyPartner-supplied, consolidated at the Suzhou warehouse
What This Product Is
Super Fulvic Acid 90% is the high-purity end of the fulvic range, at 90% active content on a dry basis as reported in the batch COA, tested by the same method as the 50% grade so the two figures are directly comparable.
The case for it is formulation density: more active ingredient per kilogram of finished product, which matters in foliar concentrates and hydroponic programmes where the dose is measured in grams per litre.
A percentage on its own does not settle the question. Solubility, effective dosage and blend performance are verified against the batch TDS and COA rather than assumed from the active content figure. Like the rest of the complementary range it is partner-supplied and consolidated at our Suzhou warehouse.
What You Get
- ≥ 90% active fulvic content on a dry basis, on the same test method as the 50% grade
- More active per kilogram, which lowers freight per unit of active on long routes
- Suited to foliar concentrates and hydroponic programmes dosed in grams per litre
- Supplier TDS and COA coordinated before the order
- Ships in the same container as the amino acid powder at no consolidation cost
Who Buys It
- Foliar concentrate formulators working to a target active per litre
- Hydroponic and soilless programmes
- Premium product lines where the fulvic claim carries the label
- Buyers already consolidating a mixed-SKU container
What It Fixes
- Two fulvic quotations on different assay bases that cannot be compared
- Freight cost per unit of active on a low-concentration input
- Hydroponic systems that will not tolerate undissolved material
- Claims made from a percentage without a supporting test method
How It Is Made And Supplied
- Same test method as the 50% grade, so the two are directly comparable
- Active content reported on a dry basis in the batch COA
- Solubility and blend performance verified against the batch TDS rather than assumed
- Packed in 25 kg or 20 kg kraft bags
- Partner-supplied, consolidated at the Suzhou warehouse
- Quoted individually with its own documentation
Technical Data
Typical specifications. Every shipment is verified against the agreed values and supplied with a batch-specific COA; where a value is not published it is left out rather than estimated.
| Active Fulvic Content | ≥ 90% (dry basis) |
|---|---|
| Indicative Use (foliar) | 0.5 – 2 g/L |
| Indicative Use (hydroponic) | 1 – 3 kg/ha |
| Packaging | 25 kg / 20 kg kraft bags |
| Supply | Partner-supplied, consolidated at the Suzhou warehouse |
Typical Use Rates
Rates vary by crop, growth stage and formulation target. Our team provides crop-specific recommendations on request.
- Foliar concentrates at 0.5 – 2 g per litre
- Hydroponic programmes at 1 – 3 kg per hectare
- Premium fertigation blends where active density is the constraint
- Micronutrient chelation in low-volume, high-value formulations
How It Compares With The Alternatives
| Against Fulvic Acid 50% | Roughly twice the active per kilogram on the same test method, at a higher price per ton. The choice is a freight and formulation-density calculation. |
|---|---|
| Against an unspecified 'super fulvic' | The assay basis and the test method are both stated, and the same method is used across both grades. |
| Against seaweed extract | Fulvic is a carrier and chelating chemistry; seaweed extract is standardised on alginic acid and used for signalling compounds. |
From Sample To Production Batch
Step 1
Compare the 50% and 90% grades on active per kilogram of finished product, not on price per ton alone.
Step 2
Request the batch TDS and COA and check solubility before designing the concentrate around it.
Step 3
Run a pre-shipment sample in your own water and at your own dose rate.
Step 4
Validate the final dosage by crop, formulation, application method and local regulation.
Step 5
Send the full basket list for a single consolidated quotation.
Product, Packaging And Application
Questions About Super Fulvic Acid 90%
Is the 90% figure comparable with the 50% grade?
Yes. Both are reported on a dry basis and tested by the same method, which is why the two can be compared directly.
Does a higher percentage guarantee better performance?
No. Solubility, effective dosage and blend performance are verified against the batch TDS and COA rather than inferred from the active content figure.
Is it manufactured by Everwell Bio?
No. It is partner-supplied and consolidated at our Suzhou warehouse alongside the amino acid powder.
What packaging is standard?
25 kg or 20 kg kraft bags.
Can I order it without amino acid powder?
It is quoted individually, but the consolidation benefit comes from shipping it in the same container as an amino acid order.
Other Grades In The Range
Fulvic Acid 50%
A mid-grade fulvic acid at ≥ 50% active content on a dry basis, supplied through our qualified partner network and consolidated into the same containe
View specification
Seaweed Extract 30%
A cold-water extract of brown seaweed standardised to 30% alginic acid on a dry basis, carrying alginates, mannitol and betaines, supplied through the
View specification
Potassium Ligno Sulphonate 60%
A refined lignosulphonate at 60% active content, used as a binder, dispersant and complexing agent in water-soluble NPK, micronutrient and suspension
View specificationGet A Quotation For Super Fulvic Acid 90%
Send the monthly volume, the destination port and the documents you need. A 200 to 500 g sample with its batch COA can ship in parallel.