Dump Trucks
70ton Mining Dump Truck 6*4 Tipper Truck
- ConditionNew
- SteeringZF8098
- Tire14.00-25
Dump Trucks
China 10 Wheel New Dumper Truck Price 371HP 20 Cubic Meters Tipper Dump Truck for Sale - Horsepower 251-350hp
A 6x4 Sinotruk HOWO 10-wheel dump truck with a 371HP WD615.97C turbocharged six-cylinder diesel engine, rated 221kW at 1900rpm and paired with the HW15710 ten-speed manual gearbox. It is designed for short-haul earthwork and material transport in mining and construction sites with rough terrain and high payload demands.
- Condition New
- Horsepower 251-350hp
- Drive Wheel 6x4
- Wheelbase 3225+1350 mm
- Curb Weight 9910 kg
Stock number held for this listing: 10111
Key Benefits
What This Unit Does Well
- 371HP WD615.97C engine is widely available in Chinese repair networks, so filters, injectors and seals are easy to source locally
- HW15710 ten-speed gearbox offers strong low-end torque and usable ratios for loaded climbs and empty return runs
- 300-litre fuel tank supports continuous operation between refuelling points in remote construction zones
- HC16 rear axle with 5.73 gear ratio delivers high traction and load capacity on steep, unpaved haul roads
- 20-cubic-meter tipping body allows for efficient bulk transport of soil, gravel and aggregates in one pass
Application Scenarios
Where It Is Used
- Short-haul earthmoving in open-pit mines with steep, ungraded haul roads and frequent dumping
- Aggregate transport from quarry to construction site on gravel or mud access roads
- Road construction projects where the truck must carry and dump fill material over uneven terrain
- Urban infrastructure work with tight space constraints and frequent stops for loading and unloading
Fit
Who It Is For
- Contractors managing small to medium construction fleets needing reliable dump trucks for local hauls
- Mining operators replacing older dump trucks with a proven engine and chassis combination
- Machinery dealers stocking dump trucks for resale in African and Southeast Asian markets
- Government procurement teams sourcing vehicles for road or infrastructure projects with limited maintenance support
Buyer Pain
Problems It Solves
- Downtime caused by engine parts that are not available locally due to mismatched model numbers
- Trucks that lack sufficient torque for loaded gradients and require excessive gear shifting
- Frequent fuel stops on remote sites due to small tank capacity and high consumption
- Inconsistent axle ratios that cause uneven wear or poor traction on soft or steep surfaces
- Lack of spare parts availability for non-standard or obsolete dump truck models
Engineering
Technical Features
- WD615.97C water-cooled four-stroke six-cylinder in-line diesel engine with turbocharging and intercooling
- Direct injection fuel system rated to EURO 2 emission standard
- HW15710 manual transmission with ten forward gears and two reverse gears
- 430mm clutch with dual-mass flywheel for smooth engagement under heavy load
- HC16 rear axle with 5.73 gear ratio in 6x4 drive layout
- 20-cubic-meter hydraulic tipping body with dual-acting cylinder and safety lock
- Single sleeper cab with factory air conditioning and standard instrument cluster
- 300-litre fuel tank with dual fuel filters and sediment bowl
Specification
Specification Table for This Listing
Taken from the supplier specification we hold. Anything not listed here is confirmed in writing before order rather than assumed.
| Condition | New |
|---|---|
| Horsepower | 251-350hp |
| Drive Wheel | 6x4 |
| Wheelbase | 3225+1350 mm |
| Curb Weight | 9910 kg |
| Engine Model | WD615.97C |
| Net Power | 221 kW at 1900 rpm |
| Maximum Torque | 1190 Nm at 1100-1600 rpm |
| Emission | EURO 2 |
| Fuel Type | Diesel |
| Fuel Tank Capacity | 300 L |
| Transmission | HW15710, 10 forward / 2 reverse |
| Clutch Size | 430 mm |
| Rear Axle | HC16 |
| Gear Ratio | 5.73 |
| Cab | Single sleeper with air conditioner |
| Gross Vehicle Weight | 20000 kg |
| Tipping Body Volume | 20 cubic meters |
| Minimum Ground Clearance | 314 mm |
| Maximum Speed | 75 km/h |
| Economic Speed | 60 km/h |
| Maximum Gradability | 70% |
| Minimum Turning Diameter | 15 m |
| Place of Origin | Shandong, China (Mainland) |
| Capacity (Load) | 21 - 30t |
| Transmission Type | Manual |
Materials
Materials and Build
- Steel cab shell with factory paint finish, white by default
- Cast steel HC16 rear axle housing
- Hydraulic tipping body made from 6mm wear-resistant steel plate
Process
How an Order Is Handled
- You send the site terrain, haul distance, material type and frequency of use
- We match the chassis code, axle ratio and tyre size to what is available in stock or from the plant
- You confirm the final specification sheet including cab colour, body type and tyre brand before deposit
- Unit is prepared, photographed and video recorded before loading
- We book RoRo or container shipment and issue the export documents your customs needs
Quality Control
Checks Before Loading
- Chassis, engine and gearbox numbers are photographed and matched to the specification sheet you approved
- Engine start, gear engagement and hydraulic lift cycle are recorded on video before loading
- Paint, glass and cab trim are checked for transport damage at the loading port
- Loading and lashing photos are sent before the vessel departs
Customisation
What Can Be Changed
- Cab colour other than the default white
- Sleeper layout, single or double bunk
- Left hand or right hand drive as your registration requires
- Tyre brand and spare wheel count
- Additional fuel tank, tool box or fifth wheel height change
- Tipping body material thickness or wear plate upgrade
Honest Comparison
How It Compares With the Alternatives
| 8-wheel dump truck | The 10-wheel model has higher load capacity and better stability on soft ground but costs more to maintain and has higher fuel consumption |
|---|
Use Guide
Using It Well
- Keep the hydraulic cylinder seals and hoses inspected monthly in dusty or wet environments
- Order the clutch plate, injector set and axle seals with the truck so the first service does not wait on shipping
Photographs
More Views of This Unit
Photographs held for this listing. Current yard photographs of the specific unit you shortlist are taken fresh before any balance is paid.
Source Specification
Manufacturer Text We Hold for This Listing
China 10 Wheel New Dumper Truck Price 371HP 20 Cubic Meters Tipper Dump Truck For Sale It is a mature model with the reliable and stable structure design, high bearing capacity, excellent engine force and highly stable performance, with its fame forged in construction and mining industries with adverse operating environments, available for the short-range earthwork transportation tasks for mines and construction projects. Mass Parameter Curb Weight(kg ) 9910 Maximum Allowable Total Mass(kg ) 20000 Towable Total Mass(kg ) Dimensions Overall Dimensions(mm) Length 7934,7634 Width 2496 Height 3170,3450 Wheel Base(mm) 3225+1350 Minimum Ground Clearance(mm) 314 Performance Parameters Maximum Speed(km/h) 75 Economic Speed(km/h) 60 Maximum Gradability(%) 70 Minimum Turning Diameter(m) 15 Recommended Engine Model WD615.92,WD615.93,WD615.92C,WD615.93C,WD615.97C Net Power(kW)/ Rotating Speed(r/min)
Reproduced from the supplier specification. Figures are confirmed in writing on the proforma invoice before any deposit.
Related Listings
Other Dump Trucks Buyers Compare With This
Dump Trucks
2023 NEW 371 Hp 6x4 Mining Dump Truck 70 Ton Tipper Truck
- ConditionNew
- CabHOWO7D,withAirconditioner
- Tire14.00-25
Dump Trucks
China Wholesale Dump Truck 6*4 for Sands/coal Minerals
- ConditionNew
- CabHOWO70(nobed),withAircondi
- Tire12.00R20(Radial)
Dump Trucks
Chinese Low Fuel Consumption Dump Truck Factory Price
- ConditionNew
- CabL2000,withAirconditioner
- Tire11.00R20(Radial)
Dump Trucks
China 336hp 6x4 Construction Sand and Gravel Loading Dump Truck
- ConditionNew
- Horsepower336HP
- Truck ModelSX3256DV384C
Dump Trucks
China 8*4 New and Used Dump Truck 50t for Afirica
- ConditionNew
- ColorRed
- Horsepower351-450hp
Buyer Questions
Questions About This Unit
Is this unit new or used
New. All units are built to order or sourced from current stock. We provide photos and chassis numbers before you commit.
What is the lead time
Units in stock can be loaded within 10 days. A build to your specification depends on the plant schedule and we confirm a date in writing with the proforma invoice.
Do you ship by container or RoRo
Dump trucks normally go RoRo. Container shipment is possible with the cab lowered on some routes. We quote both so you can compare landed cost.
What documents do I get for customs
Commercial invoice, packing list, bill of lading and certificate of origin as standard, plus any pre-shipment inspection certificate your country requires.
Price This Unit Against Your Port
Send the destination and quantity. A written specification, landed cost and shipping option comes back.