SUZUKI EN125 Cylinder 11210-12F60-0F0
SUZUKI EN125 Cylinder 11210-12F60-0F0 is supplied against OEM reference 11210-12F60-0F0 for SUZUKI EN125.
Cylinder Barrel for SUZUKI EN125
SUZUKI EN125 Cylinder 11210-12F60-0F0 is supplied against OEM reference 11210-12F60-0F0 for SUZUKI EN125. The motorcycle cylinder barrel carries the bore the piston runs in and the fins that carry combustion heat away, so bore condition decides compression and oil consumption on a small commuter engine. Our Cylinder perform well, are of the high quality and last a long time. The minimum order is one piece, packed neutral or under your own brand, with ISO9001 certification.
- OEM 11210-12F60-0F0
- Category: Motorcycle Spare Parts
- ISO9001
- MOQ 1 piece
What You Get With This Reference
- Listed against OEM reference 11210-12F60-0F0 so the part is confirmed before it is packed
- Restores compression without sourcing local rebore work
- Can be ordered with the matching piston and rings
Why Buyers Order It
- A seized engine usually damages both piston and bore beyond a simple hone
- Oversize rebore work is not available in every market
- Barrels bought by bike name alone can have the wrong stud spacing
- Finding this reference for SUZUKI EN125 locally often means a long wait or a used part of unknown history.
Where This Part Is Used and Who Buys It
Application Scenarios
- Rebuilding a seized commuter motorcycle engine
- Restoring compression on a high mileage bike
- Workshop stock for common commuter engines
Who It Is For
- Motorcycle repair shops serving commuter and delivery riders
- Parts retailers covering SUZUKI EN125
- Fleet operators running delivery motorcycles
- Traders building a commuter parts range for export markets
Technical Data From the Product Record
| Part No. | 11210-12F60-0F0 |
|---|---|
| Matched Model | SUZUKI EN125 |
| Place of Origin | China |
| MOQ | 1 Pc |
| Certification | ISO9001 |
| Packing | Neutral or custom packaging |
Only values recorded against this reference are listed. Send the number from your old part if you need a dimension that is not shown.
What the Part Is Built To Do
- Bore finished for the standard piston
- Stud holes and base gasket face to the OEM pattern
- Cooling fins to the original casting
- Individually packed
Symptoms That Point Here
- Blue smoke and rising oil consumption
- Compression too low to start easily
- Scoring visible in the bore
- Piston slap on a cold engine
How It Compares With the Alternatives
Compared with boring the original barrel oversize
A rebore needs machining capacity and an oversize piston, which is not available everywhere.
Compared with a used barrel
A used barrel arrives with unknown bore wear and no measurement record.
Fitting and Service Notes
- Replace the base and head gaskets when the barrel is changed.
- Check ring end gap in the new bore before assembly.
- Clean the oil ways in the crankcase before fitting.
- Run the engine in gently for the first tankful and avoid sustained full throttle.
Parts Usually Ordered With It
SUZUKI GN125 Brake Pedal 43110-05302-000
View details →
HONDA XR150L Clutch Lever 53178-KRH-900
View details →
SUZUKI GN125H Front Disc Brake Upper Pump 59609-H05300H-000
View details →
SUZUKI GN125 Race Kit,Steering 51622-45FA0-KIT
View details →Guides for This Kind of Job
How To Read and Verify an OEM Number Before You Order
Most wrong-part shipments start with an order placed on a vehicle name. This guide shows where the number is, how to read it and what to send a supplier.
Read →Maintenance GuideWhen To Change Fuel and Oil Filters in Hard Service
Service book intervals assume clean fuel and light duty. This guide explains how to set a realistic interval for pickups, light trucks and delivery motorcycles.
Read →Troubleshooting GuideDiagnosing Clutch Slip on a 125cc to 250cc Commuter Motorcycle
How to tell the difference between cable adjustment, a worn friction stack and a notched basket before ordering parts.
Read → IndustryMotorcycle Repair Shops
Commuter and delivery motorcycles run high mileage on poor roads, so a shop lives on fast moving consumables and crash parts.
Read →Questions About SUZUKI EN125 Cylinder 11210-12F60-0F0
Which vehicles does 11210-12F60-0F0 fit?
Is a piston included with the barrel?
Which model does it fit?
What is the minimum order?
What is the minimum order and how is it packed?
Need This Part Confirmed For Your Vehicle
Send the OEM number, the engine code or a photograph of the old part. The reference and the matched models are confirmed in writing before you pay anything.