6LED Side Walk Solar Led Light
This product is an energy saving and portable solar powered flood light. Easy to install, wiring free, no electricity needed. Energy saving with three optional working modes.
Product Overview
A portable solar-powered flood light with six 0.2W 2835 LEDs and a Taiwan Epistar chip, designed for low-maintenance outdoor lighting in stairs, trails, courtyard walls and hotel passages. The unit charges during the day via a 5.5V/0.5W solar panel and operates automatically at night on a constant mode. It uses a 1.2V/600mAh Ni-MH battery and is rated IP65 for dust and water resistance. No wiring or electricity cost is required, and the light runs for more than 10 to 15 hours after a full charge. Available in white or warm white, it is suitable for decorative and functional lighting in semi-outdoor areas.
Key Benefits
- Wiring free installation with no electricity cost, reducing site preparation and ongoing energy use
- Solar charging during the day enables automatic operation at night without external power
- IP65 rating provides protection against dust and water jets, suitable for outdoor use
- 6 x 0.2W 2835 LEDs with Taiwan Epistar chips deliver consistent brightness and long life
- 1.2V/600mAh Ni-MH battery supports over 10 to 15 hours of operation after full charge
- Monocolor output in white or warm white for consistent visual appearance in decorative settings
- Portable and easy to install, ideal for temporary or permanent placement without electrical infrastructure
- Constant working mode ensures steady light output without flicker or cycling
Problems It Solves
- High installation cost and complexity from running wires to remote or outdoor locations
- Ongoing electricity charges for outdoor lighting in areas with no grid access
- Frequent battery replacement in non-rechargeable solar lights due to short cycle life
- Inconsistent lighting from lights with multiple modes that require manual switching
- Poor durability in wet or dusty environments from non-IP65 rated fixtures
- Visible LED dots or uneven brightness from low-quality LED arrays or poor diffusers
Application Scenarios
- Staircases in residential buildings, hotels or public walkways needing night-time visibility
- Garden trails and pathways where buried wiring is not feasible
- Courtyard walls and garden edges requiring low-profile decorative lighting
- Hotel corridors and entrance passages with limited access to power sources
- Temporary installations at events or construction sites where power is unavailable
- Fence lines and boundary markers in outdoor spaces with no electrical supply
- Rural or off-grid locations where grid power is not available or too costly to extend
Who It Is For
- Overseas distributors stocking solar lighting for outdoor residential and commercial use
- Contractors installing lighting in stairwells, pathways and courtyards without electrical access
- Property managers seeking low-maintenance, no-cost lighting for common areas
- OEM brands sourcing a solar flood light with fixed LED count and standard battery
- Project buyers needing a portable, self-contained light for temporary or semi-permanent use
Engineering Detail
Technical Features
- 6 x 0.2W 2835 LEDs with Taiwan Epistar chip for consistent output and reliability
- 5.5V/0.5W solar panel for daytime charging under direct sunlight
- 1.2V/600mAh Ni-MH battery for energy storage and night-time operation
- Constant working mode with no cycling or motion sensing
- IP65 rating for protection against dust and water jets
- Operating time of more than 10 to 15 hours after full charge
- Automatic on/off function triggered by ambient light levels
- Monocolor output in white or warm white, no RGB or multi-mode options
Materials
- Silicon-based solar panel with 5.5V/0.5W output
- 1.2V/600mAh Ni-MH rechargeable battery
- 6 x 0.2W 2835 SMD LEDs with Taiwan Epistar chip
- IP65-rated housing material for outdoor durability
- Plastic or polymer casing for structural support and weather resistance
Specifications
Technical Data
Values taken from our product datasheet. Anything not listed here is confirmed per order.
| LED type | 6 x 0.2W 2835 with Taiwan Epistar chip |
|---|---|
| Solar panel | 5.5V / 0.5W |
| Battery | 1.2V / 600mAh Ni-MH |
| Working mode | Constant |
| Waterproof grade | IP65 |
| Working hours | More than 10-15 hours after fully charged |
| Colour | White / Warm White |
| Input voltage | 5.5V DC |
| Output voltage | 1.2V DC |
| LED quantity | 6 pcs |
| Chip brand | Taiwan Epistar |
| Battery type | Ni-MH |
Manufacturing Process
- LEDs assembled on the circuit board at the specified quantity and configuration
- Solar panel and battery integrated into the housing with proper wiring
- Housing sealed to achieve IP65 rating using gaskets or sealing compounds
- Automatic on/off sensor calibrated to ambient light thresholds
- Full charge and operation test under simulated daylight and night conditions
- Final inspection and packing before shipment
Quality Control
- Products are 100% tested before delivery
- Branded LED chips (Taiwan Epistar) used on the production line
- Battery capacity and solar panel output verified against specification
- IP65 sealing tested under water spray conditions
- Working hours measured after full charge to confirm 10-15 hour operation
Customization Options
- Colour output in white or warm white only; no RGB or multi-colour options
- Fixed LED count of 6 pcs; not adjustable per unit
- No variation in battery size or solar panel rating
- No option to change working mode from constant
- No custom packaging or branding unless specified in a bulk order
Honest Comparison
How It Compares With the Alternatives
| Grid-powered LED flood light | No wiring or electricity cost, but lower light output and shorter runtime than mains-powered units |
|---|---|
| Solar light with motion sensor | Constant mode provides steady light without relying on motion detection, but consumes more battery than motion-activated models |
| Solar light with multiple modes | Simpler operation with no user input needed, but less flexibility in power management compared to selectable modes |
Use Guide
Getting the Best Out of It On Site
- Install the light in a location with direct sunlight during the day for full battery charge
- Avoid placing the solar panel under shade, overhangs or obstructions
- Ensure the unit is not covered by snow, dirt or debris that blocks sunlight
- Use only in outdoor areas where the IP65 rating is sufficient for the environment
- Do not submerge the unit in water; IP65 protects against jets, not immersion
- Replace the Ni-MH battery only when performance drops below 10 hours of operation
Related Products
Others in This Range
Smiley Solar Garden Wall Light
This product is an energy-efficient & cost-saving outdoor solar led garden light. Private design and small size. There...
View specifications →
36LED Solar Led Wall Light
This product is an energy-efficient & cost-saving outdoor solar led wall light. Elegant design and small size. There...
View specifications →
56LED Solar Powered PIR Sensor Flood Light
This product is an energy saving and portable solar powered flood light. Easy to install, wiring free, no electricity...
View specifications →
Adjustable and Retrofit Led Downlight WK-RE-C-XW
Light output is focused through small round holes, delivering strong directivity, ideal for accent lighting on walls,...
View specifications →Buyer Questions
Questions About 6LED Side Walk Solar Led Light
What is the minimum order quantity?
Small order quantities are accepted. Send the required quantity and we will confirm the minimum for this model.
Can the LED count or colour be changed?
No. The LED count is fixed at 6 pcs and the colour is available only in white or warm white.
What is the working mode?
The light operates in constant mode, turning on automatically at night and staying on until dawn.
How long does the battery last on a full charge?
The battery provides more than 10 to 15 hours of operation after a full charge under normal conditions.
Is the light suitable for outdoor use?
Yes. It is rated IP65, which protects against dust and water jets, making it suitable for outdoor use in covered or sheltered areas.
Can the solar panel be replaced?
The solar panel is integrated into the housing and not replaceable by the user. Replacement requires factory service.
What payment methods do you accept?
Different payment methods are accepted. Confirm the terms with our sales team when the order is quoted.
Request a Quote for 6LED Side Walk Solar Led Light
Send the quantity, colour temperature and any customisation you need. Our sales team will confirm the configuration, lead time and price.