56LED Solar Powered PIR Sensor Flood Light
This product is an energy saving and portable solar powered flood light. Easy to install, wiring free, no electricity needed. Energy saving with three optional working modes.
Product Overview
A portable solar-powered flood light with 56 SMD2835 LEDs, designed for outdoor areas where wiring is impractical or unavailable. The unit charges via a 6V/2.5W solar panel during daylight and stores energy in a 3.7V/2200mAh Li-ion battery. It operates in three selectable modes—motion-sensing, dusk-to-dawn, and manual—offering energy savings and flexibility. The 800LM output at 4000-6000K provides bright, neutral white illumination. IP65 waterproof rating ensures durability in rain and outdoor exposure. No installation wiring required, and the unit is self-contained with a built-in PIR sensor and rechargeable battery.
Key Benefits
- Wiring-free operation with no need for electrical connections or trenching
- Self-charging via 6V/2.5W solar panel, eliminating ongoing electricity costs
- Three working modes—PIR motion sensing, dusk-to-dawn auto-on, and manual override—allow flexible use
- IP65 waterproof rating protects internal components from rain and dust
- 56 SMD2835 LEDs deliver 800LM at 4000-6000K, suitable for clear visibility in outdoor spaces
- 2200mAh Li-ion battery stores enough energy for multiple nights of operation
- Portable and easy to install—mount on wall, pole, or ground with included hardware
- No external power source required, making it ideal for remote or temporary locations
Problems It Solves
- High installation cost and complexity of running electrical wiring to remote outdoor locations
- Reliance on grid power for outdoor lighting, leading to ongoing electricity expenses
- Lack of motion detection in basic solar lights, resulting in wasted energy during non-usage periods
- Inadequate brightness or poor color temperature in low-cost solar flood lights
- Poor weather resistance in non-IP65 rated units, leading to early failure in wet conditions
- Short battery life in solar lights without sufficient storage capacity or efficient charging
Application Scenarios
- County roads and pathways where permanent wiring is not feasible
- Backyard, garden, and patio areas needing automatic lighting after dark
- Garage and shed entrances with no nearby power outlets
- Orchards and farmland for security and visibility during evening hours
- Parks and recreational areas with limited access to electricity
- Temporary event setups or construction sites requiring portable lighting
- Fence lines and property boundaries where motion detection adds security
Who It Is For
- Overseas distributors stocking solar lighting for residential and municipal use
- Contractors installing lighting in remote or off-grid locations
- Property managers needing low-maintenance outdoor lighting for yards and garages
- OEM brands sourcing a ready-to-use solar flood light with PIR sensor
- Project buyers specifying energy-saving, portable lighting for rural or temporary installations
Engineering Detail
Technical Features
- 6V/2.5W solar panel for efficient daylight charging
- 3.7V/2200mAh Li-ion battery for energy storage and night operation
- 56 SMD2835 LEDs at 0.2W/30LM each, totaling 800LM output
- 4000-6000K color temperature for neutral white light
- PIR sensor with 120° viewing angle and 20-32 ft detection range
- IP65 waterproof rating for protection against rain and dust
- Three operating modes: motion-sensing, dusk-to-dawn, manual
- Output power of 5.0W after full charge, with 6-8 hours charging time under direct sunlight
Materials
- SMD2835 LED packages for consistent light output and efficiency
- 6V/2.5W monocrystalline solar panel for reliable charging
- 3.7V/2200mAh Li-ion battery for stable energy storage
- IP65-rated polycarbonate housing with UV-resistant coating
- PIR sensor module with 120° field of view and adjustable sensitivity
Specifications
Technical Data
Values taken from our product datasheet. Anything not listed here is confirmed per order.
| Solar Panel | 6V / 2.5W |
|---|---|
| Battery | 3.7V / 2200mAh Li-ion |
| LED Type | 56 x SMD2835, 0.2W / 30LM each |
| Total Luminous Flux | 800LM |
| Color Temperature | 4000K - 6000K |
| Sensor Range | 120°, 20-32 ft |
| Waterproof Rating | IP65 |
| Output Power | 5.0W after full charge |
| Charge Time | 6-8 hours under sunshine |
| Operating Modes | Motion-sensing, Dusk-to-dawn, Manual |
| Input Voltage | DC 6V from solar panel |
| Battery Type | Li-ion |
Manufacturing Process
- Solar panel and battery assembly on the main circuit board
- Mounting of 56 SMD2835 LEDs at the specified layout and density
- Integration of PIR sensor and control logic for three operating modes
- Enclosure in IP65-rated polycarbonate housing with sealing gaskets
- Full functional test under simulated sunlight and dark conditions
- Final inspection and packaging before shipment
Quality Control
- Products are 100% tested before delivery
- Branded LED chips and high quality raw materials used on the production line
- Battery charge and discharge cycles verified during testing
- IP65 rating confirmed via water spray test
- PIR sensor range and response time validated against specification
Customization Options
- Operating mode selection (motion, dusk-to-dawn, manual) set at the factory
- Mounting hardware options available upon request (wall, pole, ground)
- Color temperature range 4000K to 6000K fixed per model, not adjustable
- No change to LED quantity or battery capacity in standard configuration
Honest Comparison
How It Compares With the Alternatives
| Grid-powered flood light | No wiring or electricity cost, but lower output and shorter runtime than grid-connected models |
|---|---|
| Basic solar light without PIR | Motion-sensing mode saves energy by only turning on when needed, extending battery life |
| Non-IP65 rated solar light | IP65 protection ensures long-term reliability in outdoor rain and dust exposure |
Use Guide
Getting the Best Out of It On Site
- Install the light in a location with direct sunlight for 6-8 hours daily to ensure full charge
- Position the PIR sensor to face the area of expected motion, avoiding direct exposure to heat sources
- Use the manual mode to test the light output before setting to motion or dusk-to-dawn
- Avoid covering the solar panel with dirt, leaves, or snow to maintain charging efficiency
- Do not disassemble the unit—IP65 seal is compromised if opened
- Replace the battery only after full degradation, as it is not user-replaceable
Related Products
Others in This Range
Smiley Solar Garden Wall Light
This product is an energy-efficient & cost-saving outdoor solar led garden light. Private design and small size. There...
View specifications →
36LED Solar Led Wall Light
This product is an energy-efficient & cost-saving outdoor solar led wall light. Elegant design and small size. There...
View specifications →
6LED Side Walk Solar Led Light
This product is an energy saving and portable solar powered flood light. Easy to install, wiring free, no electricity...
View specifications →
Adjustable and Retrofit Led Downlight WK-RE-C-XW
Light output is focused through small round holes, delivering strong directivity, ideal for accent lighting on walls,...
View specifications →Buyer Questions
Questions About 56LED Solar Powered PIR Sensor Flood Light
What is the minimum order quantity?
Small order quantities are accepted. Send the required units and mounting preference and we will confirm the minimum for that configuration.
Can the operating mode be changed after purchase?
The operating mode is set at the factory. Custom configurations are available for bulk orders.
How long does the battery last on a full charge?
The battery provides operation for multiple nights depending on usage mode and sunlight exposure.
Is the solar panel replaceable?
No. The solar panel is integrated into the housing and not designed for user replacement.
Can this light be used in cold climates?
Yes. The Li-ion battery operates within standard temperature ranges, but performance may reduce below 0°C.
What is the charge time under cloudy conditions?
Charge time increases to 10-12 hours under overcast or low-light conditions.
What payment methods do you accept?
Different payment methods are accepted. Confirm the terms with our sales team when the order is quoted.
Request a Quote for 56LED Solar Powered PIR Sensor Flood Light
Send the quantity, colour temperature and any customisation you need. Our sales team will confirm the configuration, lead time and price.