Home / Knowledge

Mill notes, not brochure copy

Rewritten from Weiye’s own posts on yarn types, shade control, cotton counts and book headbands. Numbers below appear on those posts.

Article

Classification of Polypropylene Filament

Polypropylene filament is one of the three major synthetic fibers. Density is lower than water; it is hydrophobic and chemically resistant. It is used in webbin

Article

Classification of Polyester DTY

DTY is the standard low-elastic polyester yarn used as weaving yarn for webbing. Intermingling types named on the mill note: NIM (normal), SIM (semi) and HIM (

Article

Headbands for Hardcover Bookbinding

Headbands, also called bookbinding tape or book edge tape, are processed webbing with decorative stitching along the edges. Materials named: cotton headbands a

Article

Introduction of Cotton Yarn Count

Cotton yarn thickness is expressed as count, written as S: 10s, 18S, 21s, 32S, 40s, and rarely 60 and 80. Higher count means finer yarn. The British system sti

Article

Polyester Properties

Figures published on the mill note: amorphous density 1.333 g/cm³, crystalline 1.455, typical 1.38–1.40. Moisture regain 0.4%. Softening 230–240°C, melting 255–

Article

Ribbon Classification by Weaving Process

The mill note splits ribbon into woven belt and knitted belt. On jacquard ribbon the weft is fixed and the pattern is expressed by the warp — the opposite of a

Article

Ring Spinning vs Rotor Spinning

Ring spinning: fibers lie close and even, less hairiness, smoother fabric. Rotor spinning: looser fiber arrangement, more hairiness, a plump soft hand, and larg