PC Based USB Pulse Oximeter SpO2 Sensor T130-U01

Product Overview

Standard housing colour is gray or blue. Warranty is 6 months Communication Protocol: Welcome to contact us for details.

This is a portable PC based USB type pulse oximeter SpO2 sensor, which is easy to measure your SpO2 & pulse rate on your computer with our software. Model: TM-T130-U01 Language: Chinese, Deutsch, English, Frans, Italiano, Nederlands, Russian, Spanish ( PC Software) Software:.

Problems It Solves

Long recordings and trend analysis are painful on a handheld oximeter with a two-line display. A USB sensor puts the signal straight into a computer where it can be recorded, reviewed and exported.

For this item specifically: it keeps equipment already in service working rather than forcing a replacement of the whole device.

Who It Is For

This part suits distributors holding stock against a mixed monitor fleet.

• Clinical research and data collection
• Occupational health screening
• Education and training
• Telehealth desktop setups

Specifications

Every figure below is taken from the product documentation for this item. Where a value is not published we mark it TBC rather than estimating it.

Measurement Parameters

Testing Range and Accuracy Range: PR: 30 to 250 bpm, SPO2: 0 to 100% Accuracy: PR (30 to 250BPM) :2bpm normal condition, 3bpm exercise or weak perfusion SPO2 (70 to 100%) : 2% normal condition, 3% exercise or weak perfusion , < 70% undefined Environment: Temperature: Working: 0 to 45 degC, Storage: -20 to 60 degC Humidity: Working: 30 to 95 %, Storage: 10 to 100% Elevation: Working: -500 to 5000 meters, Storage: -500 to 10000 meters Atmospheric Pressure: 76KPA to 106KPA Electrical Characters: Input Voltage: 5V +/-0.5V Standby Current: About 60mA Testing Current: About 100mA

Quality Control

This part is produced under our ISO 13485 quality management system with compliance to CE Mark and FDA regulations. It passes three inspection stages: IQC on the incoming connectors, wires, cables and terminals; IPQC through cutting, stripping, crimping, injection and assembly; and OQC on packing, labels, marks, appearance, dimensions and electrical performance before it is released.

Customisation Options

Cable length on this item is stated as 0.9M or Customized, so a non-standard length can be quoted. Under our OEM and ODM service the product features, branding, packaging and labelling are customised, and we handle the regulatory documentation for your target market.

Comparison With the Alternatives

Compared with replacing the complete assembly, this part restores the equipment at a fraction of the cost and without a new qualification exercise.

Use Guide

1. Confirm the monitor manufacturer and model against the compatibility table above.
2. Check the connector on the monitor matches USB A.
3. Choose the patient size and probe style from the model table, then quote that part number.
4. Apply the sensor to a clean, well-perfused site and keep the emitter and detector aligned opposite each other.
5. Rotate the measurement site regularly on long recordings to protect skin integrity.
6. Between patients, clean and disinfect reusable items under your own protocol; discard single-patient-use items.