Mini Size Internal SpO2 Module M100
Mini Size Internal SpO2 Module M100 is an OEM measurement module.
- ColourBlue
- Warranty24 months Communication Protocol: Welcome to contact us for details
- CertificationISO 13485 quality system, CE, FDA compliance
- CustomisationOEM and ODM available
Samples, datasheets and certificate copies are sent on request. Tell us the monitor model you are fitting.
Product Overview
Standard housing colour is blue. Warranty is 24 months Communication Protocol: Welcome to contact us for details.
This is a portable mini size SpO2 module, which can be used to measure SpO2 & PR parameters. Model: M100 Definition:.
Problems It Solves
A device manufacturer adding pulse oximetry to a ventilator, a sleep recorder or a telehealth terminal does not want to develop the optical front end from scratch. An external or internal module delivers SpO2 and pulse rate as a data stream over a defined interface.
For this item specifically: it keeps equipment already in service working rather than forcing a replacement of the whole device.
Who It Is For
This part suits distributors holding stock against a mixed monitor fleet.
- Telehealth and remote monitoring terminals
- Sleep and respiratory recorders
- Portable and handheld monitors
- Oxygen delivery equipment needing O2 and SpO2 together
Specifications
Every figure below is taken from the product documentation for this item. Where a value is not published we mark it TBC rather than estimating it.
| Name | SpO2 Module Signal Output USB ( TTL Optional) Size 24.5 mm X 18 mm |
|---|---|
| Color | Blue |
| Latex-Free | No |
| Sterile | No |
| Warranty | 24 months Communication Protocol: Welcome to contact us for details |
Measurement Parameters
Testing Range and Accuracy Range: PR: 30 to 250 bpm, SPO2: 0 to 100% Accuracy: PR (30 to 250BPM) :2bpm normal condition, 3bpm exercise or weak perfusion SPO2 (70 to 100%) : 2% normal condition, 3% exercise or weak perfusion , < 70% undefined Environment: Temperature: Working: 0 to 45 degC, Storage: -20 to 60 degC Humidity: Working: 30 to 95 %, Storage: 10 to 100% Elevation: Working: -500 to 5000 meters, Storage: -500 to 10000 meters Atmospheric Pressure: 76KPA to 106KPA Electrical Characters: Input Voltage: 3.6V - 5.5V Standby Current: About 30mA Testing Current: About 50mA
Quality Control
This part is produced under our ISO 13485 quality management system with compliance to CE Mark and FDA regulations. It passes three inspection stages: IQC on the incoming connectors, wires, cables and terminals; IPQC through cutting, stripping, crimping, injection and assembly; and OQC on packing, labels, marks, appearance, dimensions and electrical performance before it is released.
Customisation Options
Connector, cable length and packaging can be quoted to your specification. Under our OEM and ODM service the product features, branding, packaging and labelling are customised, and we handle the regulatory documentation for your target market.
Comparison With the Alternatives
Against developing an optical front end in house, a module gives you a documented measurement range and accuracy figure from day one. Choose between the internal and external variants on mechanical fit rather than performance.
Use Guide
- Confirm the monitor manufacturer and model against the compatibility table above.
- Check the connector on the monitor matches the connector stated in the specification table.
- Choose the patient size and probe style from the model table, then quote that part number.
- Apply the sensor to a clean, well-perfused site and keep the emitter and detector aligned opposite each other.
- Rotate the measurement site regularly on long recordings to protect skin integrity.
- Between patients, clean and disinfect reusable items under your own protocol; discard single-patient-use items.
What This Range Gives You
Internal and external form factors
M100 mini internal, M110 small external, M120 normal external and M180 for combined O2 and SpO2 measurement.
Published measurement ranges
SpO2 0 to 100% and pulse rate 30 to 250 bpm, with accuracy figures stated on each module page.
Documented operating environment
Working temperature, humidity, elevation and atmospheric pressure limits are published so you can qualify the module against your own enclosure.
Sensor supply from the same manufacturer
The probe that plugs into your finished device comes from the same catalogue as the module inside it.
Related Products
Other parts from the same category, often quoted alongside this one.
Questions About This Product
What warranty applies
24 months Communication Protocol: Welcome to contact us for details, as stated in the specification table for this item.
What accuracy do the modules deliver
The published figures are pulse rate +/-2 bpm in normal conditions and +/-3 bpm under motion or weak perfusion, and SpO2 +/-2% between 70 and 100% in normal conditions and +/-3% under motion or weak perfusion. Below 70% SpO2 is undefined, as with pulse oximetry generally.
What is the difference between M100 M110 and M120
M100 is a mini internal module, M110 a small external module and M120 a normal size external module. They share the same measurement ranges; choose by mechanical fit and interface.
What does the M180 add
The M180 measures oxygen concentration 0 to 100% and oxygen flow 0 to 10 L/min alongside SpO2 and pulse rate.
Do you provide integration support
Yes. Interface details and integration questions go to our engineering team through WhatsApp or email.
Can modules be supplied under our brand
Yes, module supply falls under our OEM and ODM service.
Can this be supplied under our own brand
Yes. OEM and ODM covers product features, branding, packaging and labelling, with the regulatory documentation handled for your market.
Quote Mini Size Internal SpO2 Module M100
Tell us the quantity and the monitor model you are fitting and we will confirm the part number and price.