Disposable SpO2 Sensor 9 Pin for Nellcor DS-100A I0144 Series 0.9M

Product Overview

It is documented as compatible with monitors from Nellcor, Nellcor, Edan, Goldway, Datascope and Philips and 23 further manufacturers, with the exact monitor models listed in the compatibility table below. The series carries 17 part numbers in adult, pediatric, infant and neonatal sizes. The sensor uses Oximax SpO2 technology, which is the technology the listed monitors expect. Standard housing colour is white. Warranty is 3 months.

These are SpO2 Sensors 9 Pin compatible for Covidien Nellcor, Edan, Goldway, Philips.

Problems It Solves

A reusable sensor moves between patients, and in ICU, theatre and isolation that movement is an infection control problem that reprocessing time does not fully solve. A disposable sensor is used for one patient for a limited period, typically 24 to 72 hours, and then discarded.

For this item specifically: the part exists so a Nellcor DS-100A monitor already in service can keep being used when its original probe is damaged or discontinued.

Who It Is For

This part suits departments monitoring adult, pediatric, infant and neonatal patients, anyone running Nellcor DS-100A monitors and distributors holding stock against a mixed monitor fleet.

• Intensive care with 24-48 hour site rotation
• Operating rooms and post-anaesthesia care
• Neonatal and pediatric intensive care
• Emergency admissions with unknown history
• Sleep studies and home respiratory monitoring

Specifications

Every figure below is taken from the product documentation for this item. Where a value is not published we mark it TBC rather than estimating it.

Model Numbers in This Series

Every variant below is a separate part number within the same series. Quote the code that matches the patient size and probe style you need.

Monitor Compatibility

This part is built for the monitors listed below, taken from our product documentation. A matching plug shape alone does not guarantee a matching signal, so confirm your exact model here before ordering.

Quality Control

This part is produced under our ISO 13485 quality management system with compliance to CE Mark and FDA regulations. It passes three inspection stages: IQC on the incoming connectors, wires, cables and terminals; IPQC through cutting, stripping, crimping, injection and assembly; and OQC on packing, labels, marks, appearance, dimensions and electrical performance before it is released.

Customisation Options

Cable length on this item is stated as 0.9M or Customized, so a non-standard length can be quoted. Under our OEM and ODM service the product features, branding, packaging and labelling are customised, and we handle the regulatory documentation for your target market.

Comparison With the Alternatives

Against a reusable sensor this removes the reprocessing step and the cross-contamination path, at a higher cost per patient. Where infection control leads the decision, that trade is usually worth making.

Use Guide

1. Confirm the monitor manufacturer and model against the compatibility table above.
2. Check the connector on the monitor matches 9 Pin Male.
3. Choose the patient size and probe style from the model table, then quote that part number.
4. Apply the sensor to a clean, well-perfused site and keep the emitter and detector aligned opposite each other.
5. Rotate the measurement site regularly on long recordings to protect skin integrity.
6. Between patients, clean and disinfect reusable items under your own protocol; discard single-patient-use items.