Three phase ac motorized roller with shaft ends flat milling
The DG60-AS-3PH380V-265L-10M-X is a three phase AC motorized roller with a 60 mm diameter, 1.5 mm tube thickness, and shaft ends featuring flat milling. It operates on 380V three phase power, has a rated speed of 10 meters per minute, and is available in galvanized finish. The roller is designed for integration into conveyor lines requiring consistent drive performance and precise shaft alignment.
Product Overview
The DG60-AS-3PH380V-265L-10M-X is a three phase AC motorized roller with a 60 mm diameter, 1.5 mm tube thickness, and shaft ends featuring flat milling. It operates on 380V three phase power, has a rated speed of 10 meters per minute, and is available in galvanized finish. The roller is designed for integration into conveyor lines requiring consistent drive performance and precise shaft alignment.
Part of the Motor Roller range, used in Warehouse and Distribution Centres.
Key Benefits
- Three phase AC motor provides stable and efficient drive performance at 380V
- Shaft ends with flat milling allow for secure mounting with set screws or keyways
- 60 mm diameter and 1.5 mm tube thickness offer robust construction for industrial use
- Rated speed of 10 meters per minute ensures consistent product flow
- Galvanized finish resists corrosion in humid or outdoor environments
Application Scenarios
- Integration into a gravity roller conveyor line where powered drive is needed at specific points
- Assembly line sections requiring precise, consistent product movement without manual push
- Material handling systems where shaft alignment must be maintained through flat milled ends
- Conveyor sections in high humidity or washdown environments where corrosion resistance is required
- Lines where multiple rollers are driven in sync and require uniform speed and torque
Who It Is For
- Conveyor system integrators building powered sections into existing lines
- Material handling equipment builders requiring reliable motorized rollers with flat shaft ends
- Industrial distributors sourcing motor rollers with consistent drive voltage and shaft features
- Production line builders needing rollers with fixed speed and reliable motor performance
- Warehouse automation contractors installing conveyors with synchronized drive sections
Problems It Solves
- Inconsistent drive performance when using multiple uncoordinated rollers in a line
- Shaft slippage or misalignment due to round shaft ends without flat milling
- Corrosion damage in humid or washdown areas when using non-galvanized rollers
- Difficulty in synchronizing multiple rollers when drive voltage or speed varies
- Need for a standard motor roller with fixed shaft geometry for consistent mounting
Technical Features
- Three phase AC motor with 380V power input and 50Hz frequency
- 60 mm diameter with 1.5 mm tube thickness for structural rigidity
- Shaft ends with flat milling for secure mechanical attachment
- Rated speed of 10 meters per minute for controlled product handling
- Galvanized finish for protection against moisture and surface corrosion
Materials
- Galvanized steel tube for corrosion resistance in humid or outdoor environments
- Steel shaft with flat milled ends for secure mounting with set screws or keys
- Internal motor and winding assembly designed for continuous 380V three phase operation
- Standard steel casing with galvanized coating for durability and surface protection
Quality Control
- Motor operation tested under 380V three phase supply to confirm rated speed
- Shaft flat milling verified for correct depth and alignment
- Galvanized coating inspected for uniformity and coverage
- Roller length measured to ensure it falls within 200 mm to 1500 mm range
- Motor winding resistance checked to confirm 30W power rating
Customization Options
- Roller length available from 200 mm to 1500 mm in custom increments
- Alternative finishes available: chrome plating, NR coating, PU coating, SUS304, SUS201
- Optional accessories: poly V pulley, V pulley, sprocket, timing pulley, O groove, brake, waterproof housing
- Other diameters available: 50 mm, 57 mm, 76 mm, and larger sizes on request
- Different speed ratings and torque outputs available based on model type
Use Guide
- Ensure the mounting surface allows for secure attachment of the flat milled shaft ends
- Verify that the 380V three phase power supply matches the motor input requirements
- Check that the roller length fits within the conveyor frame dimensions
- Use the rated speed of 10 meters per minute for consistent product flow
- Select galvanized finish for use in humid, washdown, or outdoor environments
Specifications
| Model No | DG60-AS-3PH380V-265L-10M-X |
|---|---|
| Power Supply | Three phase 380V |
| Motor Power | 30W |
| Diameter | 60 mm |
| Tube Thickness | 1.5 mm |
| Rated Speed | 10 M/Min |
| Shaft Feature | Flat milling on both ends |
| Roller Length | 200 mm to 1500 mm |
| Finish | Galvanized |
| Type | Standard Type |
Manufacturing Process
Step 1
Tube forming and welding of the 60 mm diameter steel tube with 1.5 mm thickness
Step 2
Shaft end machining with flat milling for mechanical attachment
Step 3
Motor assembly and connection to the roller shaft
Step 4
Galvanizing of the entire roller body for corrosion protection
Step 5
Final inspection and testing under 380V three phase power
Compared With Other Options
| Rollers with round shaft ends | Flat milled shaft ends allow secure mounting with set screws, reducing slippage under load |
|---|---|
| Single phase motor rollers | Three phase AC motors offer smoother operation and better torque at startup compared to single phase |
| Non-galvanized rollers | Galvanized finish provides better resistance to rust and moisture in harsh environments |
Three phase ac motorized roller with shaft ends flat milling Questions
What is the power supply requirement for this motor roller?
It operates on three phase 380V power with a frequency of 50Hz.
What does the flat milling on the shaft ends mean?
It allows for secure mechanical attachment using set screws or keys, preventing rotation during operation.
Can I get this roller in a different length?
Yes, roller lengths are available from 200 mm to 1500 mm, and custom lengths can be requested.
Is the roller available in finishes other than galvanized?
Yes, alternative finishes include chrome plating, NR coating, PU coating, SUS304, and SUS201.
What other diameters are available?
Other diameters include 50 mm, 57 mm, 76 mm, and larger sizes can be customized.
Can I add a pulley or brake to this roller?
Yes, optional accessories include poly V pulley, V pulley, sprocket, timing pulley, O groove, brake, and waterproof housing.
What is the rated speed of this roller?
The rated speed is 10 meters per minute, suitable for controlled product movement.
Get a Price for Three phase ac motorized roller with shaft ends flat milling
Send the quantity and any material or surface option you need, and a quotation comes back against this model number.