Φ113 alloy steel bevel gear ac motorized roller
The Φ113 alloy steel bevel gear AC motorized roller has a 113 mm diameter, 2.5 mm tube thickness, and is designed for three phase 380V power supply with a 60W motor. It delivers a rated speed of 10 meters per minute and is available in galvanized, chrome plated, NR coated, PU coated, SUS304, or SUS201 finishes. The roller is suitable for conveyor lines requiring consistent drive performance and durable construction.
Product Overview
The Φ113 alloy steel bevel gear AC motorized roller has a 113 mm diameter, 2.5 mm tube thickness, and is designed for three phase 380V power supply with a 60W motor. It delivers a rated speed of 10 meters per minute and is available in galvanized, chrome plated, NR coated, PU coated, SUS304, or SUS201 finishes. The roller is suitable for conveyor lines requiring consistent drive performance and durable construction.
Part of the Motor Roller range, used in Warehouse and Distribution Centres.
Key Benefits
- 113 mm diameter with 2.5 mm tube thickness for structural rigidity and load support
- AC motor with 60W power for steady drive performance under continuous operation
- Rated speed of 10 meters per minute for controlled material flow
- Three phase 380V power supply for stable industrial voltage environments
- Available in multiple surface finishes to suit different environmental conditions
Application Scenarios
- Conveyor lines in industrial manufacturing where consistent drive speed is required
- Assembly lines needing reliable motorized rollers for part transfer
- Material handling systems in dry or mildly corrosive environments with galvanized or coated options
- Production lines requiring a fixed drive speed with minimal maintenance
- Integration into existing conveyor systems where tube diameter and shaft size must match
Who It Is For
- Conveyor system integrators building automated lines with consistent drive units
- Industrial equipment builders sourcing motorized rollers with fixed dimensions
- Warehouse automation contractors installing drive rollers in fixed-length conveyors
- Production line designers needing a motorized roller that matches existing tube diameter and shaft size
- Industrial distributors stocking motorized rollers by power, voltage, and finish
Problems It Solves
- Mismatched motorized rollers that do not fit existing conveyor tube diameters or shaft sizes
- Inconsistent drive speed across a conveyor line due to non-standard motorized rollers
- Lack of durable finishes in environments requiring corrosion resistance
- Need for a single supplier for motorized rollers with consistent mechanical and electrical specs
- Difficulty in replacing motorized rollers without redesigning the conveyor frame
Technical Features
- 113 mm diameter with 2.5 mm tube thickness for robust mechanical performance
- Alloy steel bevel gear drive for efficient torque transmission
- AC motor with 60W power and three phase 380V supply for stable operation
- Rated speed of 10 meters per minute for controlled material handling
- Available in multiple surface finishes including galvanized, chrome plated, NR coated, PU coated, SUS304, and SUS201
Materials
- Alloy steel body for high strength and long service life under load
- Galvanized finish for protection in dry or mildly corrosive environments
- Chrome plated surface for wear resistance and appearance in industrial settings
- NR coating for moderate abrasion and chemical resistance
- PU coating for low noise and surface protection in high-speed applications
- SUS304 stainless steel for high corrosion resistance in washdown or food-grade areas
- SUS201 stainless steel for cost-effective corrosion resistance in less aggressive environments
Quality Control
- Motor output verified against 60W rating under 3PH380V supply
- Rated speed checked at 10 meters per minute under no load
- Gear and shaft alignment confirmed for smooth rotation
- Surface finish inspected for uniformity and adherence to specification
- Electrical connections tested for secure fit and insulation
Customization Options
- Roller length available from 170 mm to 1500 mm to match conveyor frame dimensions
- Surface finish selected from galvanized, chrome plated, NR coated, PU coated, SUS304, or SUS201
- Optional drive accessories: Poly V Pulley, V Pulley, Sprocket, Timing Pulley, O Groove, Brake, or Waterproof housing
- Other diameters including 50, 57, 60, 76 mm available, with larger sizes customizable
- Power options available in 60W, 90W, 120W, 150W, 250W, and higher upon request
Use Guide
- Ensure the conveyor frame supports a 113 mm diameter tube with 2.5 mm wall thickness
- Verify that the 3PH380V power supply matches the facility's electrical system
- Select the surface finish based on environmental exposure and maintenance requirements
- Choose the roller length to match the conveyor section between support brackets
- Use the tractive force and torque values in the table to confirm load capacity for the application
Specifications
| Model No | DG113i-250W-3PH380V-265L-10M-S3 |
|---|---|
| Diameter | 113 mm |
| Tube Thickness | 2.5 mm |
| Power Supply | 3PH380V |
| Motor Power | 60W |
| Rated Speed | 10 M/Min |
| Roller Length | 170 mm to 1500 mm |
| Drive Type | AC Motorized |
| Gear Type | Bevel Gear |
| Material | Alloy Steel |
| Surface Finish | X: Galvanized, G: Chrome Plating, J: NR Coating, P: PU Coating, S3: SUS304, S2: SUS201 |
Manufacturing Process
Step 1
Machining of the 113 mm diameter tube with 2.5 mm wall thickness
Step 2
Assembly of the alloy steel bevel gear drive system
Step 3
Installation of the 60W AC motor with three phase 380V connection
Step 4
Finishing of the roller surface with selected coating or plating
Step 5
Final testing of drive speed and motor operation before packing
Compared With Other Options
| Standard roller with external motor | The bevel gear motorized roller integrates the motor and drive into a single unit, reducing space and alignment complexity |
|---|---|
| Lower power motorized rollers | The 60W motor provides higher tractive force and torque at 10 M/Min, suitable for heavier loads than lower power models |
| Single phase motorized rollers | Three phase 380V supply offers more stable power delivery and better performance under continuous load |
Φ113 alloy steel bevel gear ac motorized roller Questions
What is the power supply for this motorized roller?
It operates on three phase 380V, but 3PH220V and 1PH220V options are also available.
What is the rated speed of the roller?
The rated speed is 10 meters per minute under normal load conditions.
Can the roller length be customized?
Yes, the roller length ranges from 170 mm to 1500 mm and can be adjusted to fit the conveyor frame.
What surface finishes are available?
Available finishes include galvanized, chrome plated, NR coated, PU coated, SUS304, and SUS201.
Is a brake option available?
Yes, a brake can be added as a special request during ordering.
Can other diameters be supplied?
Yes, 50, 57, 60, and 76 mm diameters are available, and larger sizes can be customized.
Get a Price for Φ113 alloy steel bevel gear ac motorized roller
Send the quantity and any material or surface option you need, and a quotation comes back against this model number.