Plastic Single Sprocket End Cap for Sprocket type:08B9T-Shaft:15
The Plastic Single Sprocket End Cap for Sprocket type 08B9T with shaft diameter 15 mm is a plastic housing designed to fit over the end of a roller shaft. It supports a 6804*1 bearing and mates with an 08B9TEETH sprocket. The unit is made from Nylon66 and is available in multiple tube size and wall thickness variants to match standard roller tube dimensions. It is intended for use in gravity and motor-driven roller systems where quiet operation and resistance to moisture are required.
Product Overview
The Plastic Single Sprocket End Cap for Sprocket type 08B9T with shaft diameter 15 mm is a plastic housing designed to fit over the end of a roller shaft. It supports a 6804*1 bearing and mates with an 08B9TEETH sprocket. The unit is made from Nylon66 and is available in multiple tube size and wall thickness variants to match standard roller tube dimensions. It is intended for use in gravity and motor-driven roller systems where quiet operation and resistance to moisture are required.
Part of the Single Sprocket Roller Bearings range, used in Warehouse and Distribution Centres.
Key Benefits
- Fits 08B9TEETH sprocket and 15 mm shaft with precision alignment
- Nylon66 housing resists moisture and wear in washdown environments
- Pre-assembled with 6804*1 bearing for smooth rotation
- Available in multiple tube size and wall thickness options
- Reduces noise and vibration in conveyor roller systems
Application Scenarios
- Gravity roller conveyors in food processing where washdown is required
- Assembly lines using sprocket-driven rollers with plastic end caps
- Material handling systems in packaging plants with frequent cleaning
- Conveyor sections where quiet operation is needed near workstations
- Roller tracks with 08B9T sprockets and 15 mm shafts in automated lines
Who It Is For
- Conveyor system integrators building sprocket-driven roller lines
- Material handling equipment builders using plastic roller bearings
- Warehouse automation contractors installing low-noise conveyor sections
- Industrial distributors stocking sprocket end caps by shaft and tube size
- Production line builders requiring washdown-resistant components
Problems It Solves
- Mismatched end caps that do not align with sprocket and shaft dimensions
- Metal end caps that cause noise and wear on plastic or coated tubes
- Lack of consistent plastic end caps for sprocket roller systems
- Inconsistent bearing fit due to poor tolerance in low-cost housings
- Need for a single source for sprocket end caps that match tube and shaft sizes
Technical Features
- Housing made from Nylon66 for durability and low friction
- Designed for 08B9TEETH sprocket and 15 mm shaft with precise bore
- Integrated 6804*1 bearing ensures smooth rotation
- Multiple variants available for different tube sizes and wall thicknesses
- Pre-drilled for mounting with standard fasteners
Materials
- Nylon66 housing for resistance to moisture and wear
- 6804*1 precision bearing for consistent rotation
- Plastic housing compatible with steel, stainless, and PVC tubes
Quality Control
- Bore diameter checked against 15 mm shaft tolerance
- Sprocket alignment verified with 08B9TEETH profile
- Bearing rotation tested by hand for free movement
- Material grade confirmed as Nylon66 before packing
Customization Options
- Special bore sizes available upon request for large volume orders
- Different wall thicknesses and tube sizes offered to match existing roller dimensions
- Custom labeling or packaging available for bulk buyers
Use Guide
- Verify that the tube size and wall thickness match the selected model
- Ensure the 15 mm shaft fits freely into the bore without binding
- Check that the sprocket aligns with the 08B9TEETH profile before assembly
- Use only with compatible 6804*1 bearings to maintain performance
- Avoid overloading the unit beyond the intended roller system load
Specifications
| Model No | Plastic Single Sprocket End Cap for Sprocket type 08B9T-Shaft:15 |
|---|---|
| Sprocket Type | 08B9TEETH |
| Shaft Diameter | 15 mm |
| Bearing Type | 6804*1 |
| Material | Nylon66 |
| Tube Size | ⌀50, ⌀50.6, ⌀50.8, ⌀60 |
| Wall Thickness | 1.2 mm, 1.5 mm, 2.0 mm |
Product Images
Manufacturing Process
Step 1
Molding of Nylon66 housing to specified tube and wall dimensions
Step 2
Insertion and press-fit of 6804*1 bearing
Step 3
Final inspection of bore and sprocket alignment
Step 4
Packaging for shipment
Compared With Other Options
| Metal end caps | Plastic housing reduces noise and protects coated or plastic tubes from damage |
|---|---|
| Standard plastic end caps | This model includes a precision 6804*1 bearing and is designed for 08B9TEETH sprocket alignment |
| Unbraced end caps | Integrated bearing ensures consistent rotation and longer service life |
Plastic Single Sprocket End Cap for Sprocket type:08B9T-Shaft:15 Questions
What sprocket type does this end cap fit?
It is designed for 08B9TEETH sprocket type.
What shaft size is compatible?
The end cap fits a 15 mm shaft.
What material is the housing made from?
The housing is made from Nylon66.
Are there different tube size options?
Yes, available for tube sizes ⌀50, ⌀50.6, ⌀50.8, and ⌀60 with varying wall thicknesses.
Can I get a custom bore size?
Yes, special bore sizes are available for large volume orders.
Is the bearing pre-installed?
Yes, the end cap comes with a 6804*1 bearing already installed.
Get a Price for Plastic Single Sprocket End Cap for Sprocket type:08B9T-Shaft:15
Send the quantity and any material or surface option you need, and a quotation comes back against this model number.