Plastic Single Sprocket End Cap for Sprocket type:08B11T-Shaft:15
The Plastic Single Sprocket End Cap for Sprocket type 08B11T and Shaft 15 is a precision-machined plastic housing designed to fit a 08B11T sprocket with a 15 mm shaft. It is made from Nylon66 and integrates a 6804*1 precision bearing to ensure smooth rotation under load. The unit is available in multiple tube size variants and is intended for use in gravity roller, sprocket roller, and conveyor systems where quiet operation and resistance to wear are required.
Product Overview
The Plastic Single Sprocket End Cap for Sprocket type 08B11T and Shaft 15 is a precision-machined plastic housing designed to fit a 08B11T sprocket with a 15 mm shaft. It is made from Nylon66 and integrates a 6804*1 precision bearing to ensure smooth rotation under load. The unit is available in multiple tube size variants and is intended for use in gravity roller, sprocket roller, and conveyor systems where quiet operation and resistance to wear are required.
Part of the Single Sprocket Roller Bearings range, used in Warehouse and Distribution Centres.
Key Benefits
- Integrated 6804*1 precision bearing ensures smooth and consistent rotation
- Nylon66 housing resists wear and operates quietly under load
- Designed for 08B11T sprocket and 15 mm shaft to match existing conveyor components
- Available in multiple tube size variants to fit different tube diameters
- Suitable for washdown and clean environments due to plastic material resistance
Application Scenarios
- Gravity roller systems in packaging lines where quiet operation is required
- Sprocket roller conveyors in assembly lines with frequent start-stop cycles
- Washdown areas in food or pharmaceutical processing where metal components are not allowed
- Conveyor sections where plastic housings prevent damage to painted or coated tubes
- Integration into single sprocket roller assemblies where low noise and low friction are critical
Who It Is For
- Conveyor system integrators building gravity or sprocket roller lines
- Material handling equipment builders requiring consistent end cap fit
- Industrial distributors stocking plastic roller bearings by sprocket type
- Production line builders needing components that match specific shaft and tube sizes
- Manufacturers of conveyor rollers requiring quiet, wear-resistant end caps
Problems It Solves
- Mismatched end caps that cause binding or misalignment in sprocket roller systems
- Noise and vibration from metal housings in high-speed or sensitive environments
- Corrosion or wear in wet or washdown areas where metal parts degrade
- Inconsistent fit between sprocket and tube due to non-standard housing dimensions
- Difficulty sourcing a single supplier for end caps that match a specific sprocket and shaft size
Technical Features
- Precision-machined Nylon66 housing for consistent fit and low friction
- Integrated 6804*1 bearing ensures smooth rotation and long service life
- Designed for 08B11T sprocket with 15 mm shaft to match standard industrial components
- Available in multiple tube size variants including 50*1.2, 50*1.5, 50*2.0, 50.6*1.2, 50.6*1.5, 50.8*1.2, 50.8*1.5, and 60*2
- Housing thickness and bore size vary by model to match specific tube and shaft dimensions
Materials
- Nylon66 housing for wear resistance and quiet operation
- 6804*1 precision bearing for smooth rotation under load
- Plastic housing prevents marking on painted or coated tubes
- Non-corrosive material suitable for washdown and humid environments
Quality Control
- Bore size verified against 15 mm shaft tolerance before packing
- Bearing rotation checked for free movement and smooth operation
- Housing dimensions confirmed against D1, D2, D3, D4 specifications
- Material grade confirmed as Nylon66 for each batch
- Visual inspection for cracks, flash or misalignment in the housing
Customization Options
- Special bore sizes available upon request for large volume orders
- Alternative tube size variants can be produced based on customer drawings
- Different housing thicknesses available to match specific tube wall thickness
- Custom marking or labeling possible for bulk orders
- Multiple model variants available for 08B11T sprocket and 15 mm shaft
Use Guide
- Verify that the shaft diameter is exactly 15 mm before installation
- Check that the tube size matches the D1/D2/D3/D4 dimensions listed for the model
- Ensure the bearing is properly seated and rotates freely after mounting
- Use only in applications where the load does not exceed the bearing and housing rating
- Avoid high-impact or high-temperature environments beyond the material limits
Specifications
| Model No | Plastic Single Sprocket End Cap for Sprocket type 08B11T-Shaft:15 |
|---|---|
| Sprocket Type | 08B11T |
| Shaft Diameter | ⌀15 mm |
| Housing Material | Nylon66 |
| Bearing Type | 6804*1 |
| Tube Size | 50*1.2, 50*1.5, 50*2.0, 50.6*1.2, 50.6*1.5, 50.8*1.2, 50.8*1.5, 60*2 |
| D1 | ⌀50 mm to ⌀60 mm |
| D2 | ⌀47.6 mm to ⌀56 mm |
| D3 | ⌀50 mm to ⌀60 mm |
| D4 | ⌀47 mm to ⌀56 mm |
Product Images
Manufacturing Process
Step 1
Machining of Nylon66 housing to specified D1, D2, D3, D4 dimensions
Step 2
Insertion and alignment of 6804*1 precision bearing into the housing
Step 3
Inspection of bore size and shaft fit to match 15 mm shaft requirement
Step 4
Final assembly and visual check for dimensional consistency
Step 5
Packing according to model variant and quantity
Compared With Other Options
| Metal end caps | Plastic housing reduces noise and prevents marking on coated tubes, while metal offers higher load capacity |
|---|---|
| Standard plastic end caps | This unit has a precision-machined bore and integrated bearing, ensuring consistent fit and rotation |
| Press-fit end caps | This unit is designed for a 15 mm shaft and fits with a press fit, but is not intended for frequent removal |
Plastic Single Sprocket End Cap for Sprocket type:08B11T-Shaft:15 Questions
What sprocket type and shaft size does this end cap fit?
It is designed for 08B11T sprocket with a 15 mm shaft.
What material is the housing made from?
The housing is made from Nylon66 for wear resistance and quiet operation.
Can I get a different tube size than the ones listed?
Yes, special tube sizes are available for large volume orders based on customer drawings.
Is the bearing pre-installed?
Yes, the 6804*1 precision bearing is integrated into the housing before shipping.
Is this end cap suitable for washdown areas?
Yes, Nylon66 is resistant to moisture and chemicals, making it suitable for washdown environments.
How many tube size variants are available?
Eight variants are available: 50*1.2, 50*1.5, 50*2.0, 50.6*1.2, 50.6*1.5, 50.8*1.2, 50.8*1.5, and 60*2.
Get a Price for Plastic Single Sprocket End Cap for Sprocket type:08B11T-Shaft:15
Send the quantity and any material or surface option you need, and a quotation comes back against this model number.