Plastic Single Sprocket End Cap for Sprocket type:08B14T-Shaft:15
The Plastic Single Sprocket End Cap for Sprocket Type 08B14T and Shaft Ø15 is a precision-machined plastic housing designed to fit over a roller shaft with a 15 mm diameter and support a 08B14T sprocket. It is made from Nylon66 and integrates a 6804*2 bearing for smooth rotation. The unit is compatible with steel, stainless steel, or PVC tubes and is intended for use in gravity, sprocket, and O-belt roller systems where quiet operation and resistance to wear are required.
Product Overview
The Plastic Single Sprocket End Cap for Sprocket Type 08B14T and Shaft Ø15 is a precision-machined plastic housing designed to fit over a roller shaft with a 15 mm diameter and support a 08B14T sprocket. It is made from Nylon66 and integrates a 6804*2 bearing for smooth rotation. The unit is compatible with steel, stainless steel, or PVC tubes and is intended for use in gravity, sprocket, and O-belt roller systems where quiet operation and resistance to wear are required.
Part of the Single Sprocket Roller Bearings range, used in Warehouse and Distribution Centres.
Key Benefits
- Integrated 6804*2 precision bearing ensures smooth and quiet rotation
- Nylon66 material resists wear and performs well in washdown and humid environments
- Designed for 08B14T sprocket and Ø15 shaft to match existing roller systems
- Available in multiple wall thicknesses (1.2 mm, 1.5 mm, 2.0 mm) for different load and fit requirements
- Housing fits standard tube sizes from Ø46 to Ø50.8 mm for direct replacement or integration
Application Scenarios
- Replacing worn end caps on sprocket rollers in a warehouse conveyor line
- Introducing quiet operation in a production line where noise reduction is required
- Using in washdown areas such as food processing or pharmaceutical lines
- Integrating into O-belt or poly-V roller systems where plastic components prevent damage to belts
- Replacing metal end caps with lighter plastic units to reduce overall roller weight
Who It Is For
- Conveyor system integrators sourcing consistent end caps for sprocket roller assemblies
- Material handling equipment builders requiring plastic components for corrosion resistance
- Industrial distributors stocking plastic roller end caps by shaft and sprocket type
- Assembly line builders using sprocket rollers in automated transfer systems
- Logistics automation contractors installing gravity or powered sprocket rollers in clean environments
Problems It Solves
- Worn or missing end caps that cause sprocket misalignment or bearing failure
- Metal end caps that corrode or damage PVC or stainless steel tubes
- Noisy operation in roller systems due to loose or poorly fitted end caps
- Inconsistent fit between end caps and shafts when sourced from multiple suppliers
- Lack of plastic components in sprocket roller systems where chemical or moisture resistance is needed
Technical Features
- Housing made from Nylon66 for durability and resistance to moisture and chemicals
- Integrated 6804*2 bearing for low-friction, free-running operation
- Designed for sprocket type 08B14T and shaft diameter of 15 mm
- Available in multiple wall thicknesses: 1.2 mm, 1.5 mm, 2.0 mm
- Compatible with tube sizes from Ø46 mm to Ø50.8 mm
- Pre-drilled for shaft mounting with a central bore of Ø15 mm
- Smooth internal bore ensures proper bearing alignment and rotation
Materials
- Nylon66 housing for resistance to moisture, wear and chemical exposure
- 6804*2 precision bearing for smooth and consistent rotation
- Compatible with steel, stainless steel, and PVC tubes for diverse industrial applications
Quality Control
- Bore diameter checked against Ø15 mm to ensure shaft fit
- Wall thickness verified across all variants (1.2 mm, 1.5 mm, 2.0 mm)
- Bearing rotation tested by hand for free movement and smoothness
- Material grade confirmed as Nylon66 before packing
Customization Options
- Special bore sizes available upon request for high-volume orders
- Different wall thicknesses available to suit load and fit requirements
- Alternative materials available for specific environmental conditions (on request)
Use Guide
- Ensure the shaft diameter is exactly Ø15 mm before installation
- Verify the tube size matches the housing diameter (Ø46 to Ø50.8 mm)
- Install the end cap with the bearing properly seated and aligned
- Use only with 08B14T sprockets for correct tooth engagement
- Avoid over-tightening during mounting to prevent housing deformation
Specifications
| Model No | Plastic Single Sprocket End Cap for Sprocket Type 08B14T-Shaft:15 |
|---|---|
| Sprocket Type | 08B14T |
| Shaft Diameter | Ø15 mm |
| Housing Material | Nylon66 |
| Bearing Type | 6804*2 |
| Wall Thickness | 1.2 mm, 1.5 mm, 2.0 mm |
| Tube Size Range | Ø46 mm to Ø50.8 mm |
| Case Diameter | ⌀50 mm, ⌀50.6 mm, ⌀50.8 mm |
Product Images
Manufacturing Process
Step 1
Molding of Nylon66 housing to specified dimensions and tolerances
Step 2
Insertion and alignment of 6804*2 bearing into the housing
Step 3
Final inspection of bore diameter and wall thickness
Step 4
Packaging for shipment with protection against dust and impact
Compared With Other Options
| Metal end caps | Plastic version reduces weight and prevents tube damage, but may have lower load capacity under extreme conditions |
|---|---|
| Standard plastic end caps without bearing | This unit includes a pre-mounted 6804*2 bearing for immediate use and smoother operation |
| Pressed-in plastic housings | This unit is designed with a precise bore and wall thickness for consistent fit and bearing alignment |
Plastic Single Sprocket End Cap for Sprocket type:08B14T-Shaft:15 Questions
What sprocket type does this end cap fit?
It is designed for sprocket type 08B14T.
What shaft size is this end cap for?
It fits a shaft with a diameter of Ø15 mm.
Is the bearing included?
Yes, the end cap integrates a 6804*2 precision bearing.
What material is the housing made from?
The housing is made from Nylon66.
Can I get a different wall thickness?
Yes, available in 1.2 mm, 1.5 mm, and 2.0 mm wall thicknesses.
Is this compatible with PVC tubes?
Yes, it is designed to work with steel, stainless steel, and PVC tubes.
Get a Price for Plastic Single Sprocket End Cap for Sprocket type:08B14T-Shaft:15
Send the quantity and any material or surface option you need, and a quotation comes back against this model number.