Ac taper motorized roller
The DGT60-AS-3PH380V-265L-10M-X is a three phase 380V AC taper motorized roller with a 60mm diameter, 1.5mm tube thickness, and a 265mm tube face length. It is rated for a 10 meters per minute speed and features a galvanized finish. The unit is designed for use in powered roller conveyors where consistent drive performance and reliable operation are required under continuous load conditions.
Product Overview
The DGT60-AS-3PH380V-265L-10M-X is a three phase 380V AC taper motorized roller with a 60mm diameter, 1.5mm tube thickness, and a 265mm tube face length. It is rated for a 10 meters per minute speed and features a galvanized finish. The unit is designed for use in powered roller conveyors where consistent drive performance and reliable operation are required under continuous load conditions.
Part of the Motor Roller range, used in Warehouse and Distribution Centres.
Key Benefits
- 30W motor power with three phase 380V supply for stable operation in industrial environments
- Tapered roller design with 60mm diameter and 1.5mm tube thickness for structural rigidity
- Rated speed of 10 meters per minute for consistent product handling
- Galvanized finish provides corrosion resistance for dry or mildly humid environments
- Available in standard, short, accumulation, and high torque types to match application needs
Application Scenarios
- Powered roller conveyors in warehouse automation where products move at a steady pace
- Assembly lines requiring consistent drive speed for part transfer between stations
- Material handling systems in manufacturing where a reliable motorized roller is needed
- Conveyor sections where a tapered roller improves alignment and reduces belt tracking issues
- Integration into larger conveyor systems where a fixed speed and consistent drive are required
Who It Is For
- Conveyor system integrators building powered roller sections
- Industrial equipment builders requiring motorized rollers with defined drive characteristics
- Logistics automation contractors installing conveyors with fixed speed control
- Production line designers needing consistent roller speed for part handling
- Industrial distributors sourcing motorized rollers with standard specifications
Problems It Solves
- Inconsistent product movement caused by non-uniform drive forces in powered conveyors
- Misalignment of products on flat rollers due to lack of taper design
- Need for a fixed speed motorized roller that matches a specific voltage and drive type
- Reliance on multiple suppliers for different roller types and drive configurations
- Difficulty in matching roller length and drive voltage to existing conveyor system design
Technical Features
- Tapered roller with 60mm diameter and 1.5mm tube thickness for strength and alignment
- Three phase 380V power supply with 30W motor for stable continuous operation
- Rated speed of 10 meters per minute for predictable conveyor performance
- 265mm tube face length for consistent mounting and alignment in conveyor frames
- Galvanized finish for protection in dry or mildly corrosive environments
Materials
- Galvanized steel tube for general industrial use in dry or mildly humid environments
- Chrome plated tube (G) for improved wear resistance in high-friction applications
- NR coating (J) for non-marking and low-friction surface in sensitive product handling
- PU coating (P) for noise reduction and surface protection in high-speed conveyors
- SUS304 (S3) and SUS201 (S2) stainless steel options for corrosive or washdown environments
Quality Control
- Motor power verified against 30W specification during assembly
- Rated speed of 10 M/Min checked under no-load and load conditions
- Finish type confirmed against the order specification (e.g., galvanized, chrome, etc.)
- Tube face length measured to ensure 265mm tolerance
- Taper alignment verified to prevent misalignment during conveyor operation
Customization Options
- Available in multiple types: Standard (AS), Short (ASs), Accumulation (AU), High Torque (BP, BPs)
- Optional pulley types: Poly V, V, Sprocket, Timing, O Groove, Brake, Waterproof
- Roller length customizable from 200mm to 1500mm
- Diameter options available: 50mm, 57mm, 60mm, 76mm, and larger sizes on request
- Material finish options: Galvanized (X), Chrome Plating (G), NR Coating (J), PU Coating (P), SUS304 (S3), SUS201 (S2)
Use Guide
- Ensure the conveyor frame supports the 60mm diameter and 1.5mm tube thickness
- Verify that the power supply matches three phase 380V before installation
- Use the 265mm tube face length to align mounting holes with the conveyor frame
- Select the appropriate finish (e.g., galvanized, chrome, stainless) based on environmental conditions
- Match the roller length to the conveyor section width, with options from 200mm to 1500mm
Specifications
| Model No | DGT60-AS-3PH380V-265L-10M-X |
|---|---|
| Motor Type | AC Taper Motorized Roller |
| Diameter | 60 mm |
| Tube Thickness | 1.5 mm |
| Tube Face Length | 265 mm |
| Rated Speed | 10 M/Min |
| Power Supply | Three Phase 380V |
| Motor Power | 30W |
| Finish | Galvanized |
| Type | Standard Type (AS) |
Manufacturing Process
Step 1
Tapered tube fabrication with 60mm diameter and 1.5mm thickness
Step 2
Galvanizing or coating application based on finish selection
Step 3
Motor and gear assembly with 30W AC motor and drive mechanism
Step 4
Mounting of end caps and shafts for alignment and drive connection
Step 5
Final testing of speed and torque under load before packing
Compared With Other Options
| Standard flat motorized roller | Taper design improves product alignment and reduces tracking issues on the conveyor |
|---|---|
| Single phase motorized roller | Three phase 380V offers more stable power delivery and higher efficiency in industrial settings |
| Short type (ASs) | Standard type has longer tube face for better mounting stability and load distribution |
| High torque type (BP) | Standard type is lighter and faster, while high torque is better for heavy or sticky loads |
| Non-galvanized roller | Galvanized finish adds corrosion resistance, suitable for longer life in humid or variable environments |
Ac taper motorized roller Questions
What is the rated speed of this motorized roller?
The rated speed is 10 meters per minute.
What power supply does it require?
It requires a three phase 380V power supply.
What finish is included in the standard model?
The standard model has a galvanized finish.
Can I get a different roller length?
Yes, roller length can be customized from 200mm to 1500mm.
Are other materials available?
Yes, options include chrome plating, NR coating, PU coating, SUS304, and SUS201.
What types are available besides standard?
Other types include short (ASs), accumulation (AU), and high torque (BP, BPs).
Can I add a pulley or brake?
Yes, optional accessories include Poly V Pulley, V Pulley, Sprocket, Timing Pulley, O Groove, Brake, and Waterproof features.
Get a Price for Ac taper motorized roller
Send the quantity and any material or surface option you need, and a quotation comes back against this model number.