Pendant Light Project in Australia
Ring pendants at different heights over bar and table seating meant several drop lengths in one room.
The Project
An Australian hospitality interior using ring pendants over a dining and bar area.
Project ChallengeWhat Made It Difficult
Ring pendants at different heights over bar and table seating meant several drop lengths in one room.
What The Buyer Was Worried About
- Several drop lengths in one order invite mistakes
- Ring pendants over a bar are seen close up
- Finish marks show under close inspection
What We Supplied
One ring model with a wide drop range, cut per zone at the factory, in a matt finish that does not show handling marks.
Drop schedule per zone confirmed
Cables cut at the factory to the schedule
Matt finish sprayed in one batch
Cartons marked per zone
Getting It To Site
Cartons marked by zone so the installer could work zone by zone.
What We Checked
Drop lengths verified against the schedule before packing.
How It Ended
Each zone was installed at the intended height with no cable cutting on site.
What The Buyer Gained
A single model covered several ceiling heights, which kept the order simple.
Related Products
Chandeliers and Pendant LightsHigh Purity Alu Pendant Light SD2237-RM600 mm matt gold ring pendant with acrylic diffuser, 36 W, drop 110 to 1500 mmView specification
Chandeliers and Pendant LightsHigh Purity Alu Pendant Light SD2169-A1200 mm straight linear pendant, 120 mm wide, 34 W, sand blackView specificationHow This Kind Of Order Runs
SolutionProject Lighting SupplyProject orders fail on coordination more often than on product. This is how we run a project order, from the fixture schedule through to a container that can be unpacked floor by floor.Read more
SolutionWholesale and Private LabelFor distributors the problem is rarely the first container. It is the second one, eighteen months later, when the finish has drifted, the driver has been swapped and the model code no longer means the same thing.Read more
Questions About This Project
Can you supply a project of this type again?
Yes. This is normal project work for us and runs through our hotels and hospitality process.
What do you need to quote a project like this?
A fixture schedule with quantities, finishes and colour temperatures, plus measured ceiling heights if drops are to be cut at the factory.
How long would production take?
20 days or less on the models in this catalogue. Transit is quoted separately and depends on the shipping mode.
Is the client named?
No. We describe projects by type and destination rather than naming clients, unless the client has asked us to.
Have A Similar Project
Send the fixture schedule or a photograph of the space and we tell you which models fit and what it costs.