[email protected]Landline +86 23 4146 1065Bishan District, Chongqing, China · Mon-Fri 09:00-18:00 China Standard Time (GMT+8)
  1. Home
  2. Products
  3. Roof Binoculars (DCF)
  4. Roof Binoculars WD76 10x42 Black/Green

Roof Binoculars WD76 10x42 Black/Green

The WD76 10x42 is a roof prism binocular with optional nitrogen filling and IPX7 waterproofing. It shares the same optical system and appearance with the non-waterproof version. Standard build uses BK7 prisms and green+blue coating. Available in 8x and 10x magnification, with black or green+black housing. Designed for brands that need a compact, customisable roof prism model with optional waterproof performance.

Specification as published on the Shinyzen source data for this model
ModelWD76
Magnification10x
Objective Diameter42 mm
Prism SystemRoof, BK7 or BAK4 optional
CoatingGreen+blue standard, all blue or all green available
Waterproof and FogproofOptional, nitrogen filled, IPX7
Focus SystemCentre focus
EyecupsTwist-up
Tripod AdaptableNo
Net Weight0.610 kg
Carton Dimensions18x15x7 cm
Manufactured InChongqing, China
Standard Quotation BasisFOB Chongqing Port
Why It Sells

Key Benefits

Optional nitrogen filling makes the model fully waterproof and fogproof, suitable for wet conditions

Same optical system and appearance as the non-waterproof version, so only the sealing differs

10x magnification with a 42 mm objective gives a clear image at moderate distance

Roof Binoculars WD76 10x42 Black/Green: Twist-up eyecups allow use with or without glasses

Available in both 8x and 10x magnification for different use cases

Carton dimensions of 18x15x7 cm are fixed, which supports predictable freight and FBA cartonisation

Application Scenarios

Where It Is Used

Roof Binoculars WD76 10x42 Black/Green: Birdwatching in wet forest or coastal areas where rain and spray are common

Hiking and outdoor use in variable weather where internal fogging must be avoided

Marine observation from shore or boat where salt spray and sudden dampness occur

Hunting in cold or humid seasons where temperature shifts cause fogging

General outdoor use where a durable, sealed optical system is needed

Buyer Fit

Who It Is For

  • Optics brands that need a 10x42 roof prism model under their own label with optional waterproofing
  • Importers replacing a non-waterproof 42 mm model that fails in rainy conditions
  • Amazon and e-commerce sellers who need a defendable IPX7 claim
  • Outdoor and hunting retail chains building a mid-tier house brand
  • Buyers who already stock the 8x version and want a higher magnification option
Pain Points

Problems It Solves

01

Roof Binoculars WD76 10x42 Black/Green: Internal fogging caused by temperature changes in non-waterproof models

02

Returns from customers who expose non-waterproof models to rain or immersion

03

The need to develop a new optical system when only the sealing or housing changes

04

Eye relief issues for customers who wear glasses

05

Unpredictable carton sizing that disrupts freight or FBA planning

Build

Technical Features

  • Roof Binoculars WD76 10x42 Black/Green: Roof prism (DCF) layout with optional BAK4 or BK7 prisms
  • Green+blue coating across the optical train as standard
  • Optional nitrogen purge and sealing for IPX7 waterproofing
  • Centre focus system with right eye dioptre adjustment
  • Twist-up eyecups for use with or without glasses
  • No tripod adapter thread, so not tripod adaptable
  • Fixed carton dimensions of 18x15x7 cm
  • Net weight of 0.610 kg
Materials

Materials

  • BK7 prisms as the standard specification, BAK4 available as option
  • Green+blue coating on optical elements, with custom coating options
  • Nitrogen fill inside a sealed body for waterproof models
  • Black or green+black rubber housing
Manufacturing Process

How It Is Made

Roof Binoculars WD76 10x42 Black/Green: Optical element grinding and coating to the agreed green+blue recipe

Prism cementing and alignment with optional BAK4 or BK7

Body assembly on the roof binocular line in the Chongqing factory

Nitrogen purge and sealing for waterproof models

Collimation and image check on every unit

IPX7 immersion verification for waterproof versions before packing

Checks Before Packing

Quality Control

  • Roof Binoculars WD76 10x42 Black/Green: Collimation checked on every assembled unit before it leaves the line
  • Waterproof verification against the IPX7 rating after nitrogen filling
  • In-process checks by Shinyzen staff based twenty minutes from the factory
  • Buyer led factory audit and pre shipment inspection can be arranged on request
OEM and ODM

Customisation Options

  • Coating changed from green+blue to all blue or all green
  • Prism specification changed between BK7 and BAK4
  • Coating on prisms and penta prisms specified separately
  • Own logo, brand name, private label and packing method on body and packaging
  • Rubber housing colour in black or green+black, the only visible external change
  • Different customisation changes the cost, so artwork must be sent for quoting
Honest Comparison

Compared With Other Models

WD76 8x42
The 8x version has lower magnification but a steadier hand-held image in low light; both share the same optical system and appearance
Non-waterproof WD76 10x42
The non-waterproof version has no nitrogen fill and is only daily-life water resistant; it will fog in sudden temperature changes
Porro prism models such as WP48 10x50
The porro gathers more light through a 50 mm objective but is bulkier and not waterproof
WD76 10x42 with tripod adapter
This model has no tripod adapter thread; a separate adapter is needed for tripod use
Setting It Up

Use Guide

  • Roof Binoculars WD76 10x42 Black/Green: Set the barrel spacing until the two images merge into one circle
  • Close the right eye and focus the centre wheel until the left image is sharp
  • Close the left eye and turn the right dioptre ring until that side matches
  • Twist the eyecups down when wearing glasses and up when not
  • Rinse salt spray off with fresh water and dry the body before storage
  • Do not submerge non-waterproof versions in water; they are not designed for immersion
FAQ

Questions About the Roof Binoculars WD76 10x42 Black/Green

Is the WD76 10x42 really waterproof or only water resistant?

It is nitrogen filled and rated IPX7, which is full waterproof and fogproof. Non-waterproof versions have no nitrogen fill and are only daily-life water resistant.

What is the difference between the waterproof and non-waterproof version?

They share the same optical system and appearance. The difference is nitrogen filling and sealing; only the waterproof version is rated IPX7.

Can we change the coating and prism?

Yes. The standard coating is green+blue. All blue or all green is available. The standard prism is BK7; BAK4 is also available. Prism and penta prism coatings can be specified separately.

Can we put our own brand on it?

Yes. Logo, brand name, private label and packing method are all customisable. Send your artwork and we will quote based on the changes.

Where is it made and on what terms do you quote?

It is produced in our own factory in Chongqing, China. Quotations are normally based on FOB Chongqing Port unless otherwise requested.

What are the packing dimensions and weight?

Net weight is 0.610 kg and the box measures 18x15x7 cm. Send your destination and we will work the cartonisation and freight with you.

Can you ship straight to an Amazon warehouse?

Yes. Shipping direct to Amazon warehouses is supported alongside sea freight, air freight and courier.

Quote the Roof Binoculars WD76 10x42 Black/Green

Send the quantity, the branding you need and the destination. We reply with a specification sheet and an FOB Chongqing price.