200mm Kapoor Modern Art Gold Stainless Steel Mirror Recessed Wall Decor
A recessed wall decor panel in 304 or 316 stainless steel with a concave mirror-polished surface, sized at 200mm as standard but available in any custom dimension. The surface is hand-polished to a mirror finish and can be produce
What This Piece Is
A recessed wall decor panel in 304 or 316 stainless steel with a concave mirror-polished surface, sized at 200mm as standard but available in any custom dimension. The surface is hand-polished to a mirror finish and can be produced in gold or other colours on request. Built to your drawing or reference photo, it is fabricated with a thickness between 1mm and 4mm and shipped in a wooden crate with foam or plastic lining. Kapur Sculpture handles the full production cycle from design to loading, with inspections at every stage and digital photos provided before shipment.
Key Benefits
- Made to your specified size, not limited to standard catalogue dimensions
- 304 or 316 stainless steel selected based on installation environment, not default grade
- Mirror finish hand-polished to eliminate visible tool marks and reflect light evenly
- Corrosion and high temperature resistance allow permanent indoor or outdoor installation
- Recessed form reduces surface exposure to impact and weathering compared to flush-mounted panels
- Digital inspection photos provided at each stage for remote quality verification
Buyers and Specifiers
- Interior designers specifying wall features for luxury residential or commercial spaces
- Hotel and property developers integrating custom art into fit-out programmes
- Architects needing a precise, dimensionally accurate wall panel to match a design detail
- Sculpture galleries and importers sourcing custom-sized metal wall art from China
- Public art consultants commissioning durable, low-maintenance wall features for civic buildings
What It Fixes
- Standard wall decor sizes do not match the exact dimensions of a project’s architectural void
- Painted or coated surfaces degrade over time and require maintenance, while stainless steel retains its finish
- Mirror finishes on metal panels often show tool marks or uneven polish, but this piece is hand-polished
- Buyers cannot inspect a factory in China, so digital photos are sent at each production stage
- Large wall panels are damaged in transit due to poor packaging, but each unit ships in a wooden crate with internal foam or plastic
Where This Sculpture Is Installed
Hotel lobbies and reception areas needing a reflective accent on a feature wall
Shopping mall interiors with high ceilings and long sightlines requiring a subtle visual anchor
Corporate office atriums and executive suites with modern minimalist design
Private residences with contemporary interior finishes and high-end finishes
Public building foyers and civic spaces where a durable, low-maintenance wall feature is needed
Interior design projects requiring a custom-sized reflective panel to fit a specific architectural void
How It Is Built
- Concave form with a recessed profile to reduce surface exposure
- Material grade selected between 304 and 316 based on environmental exposure
- Surface hand-polished to mirror finish after fabrication to remove welds and tool marks
- Thickness between 1mm and 4mm, chosen to balance rigidity and weight
- Any size customised from your drawing or photo, not limited to listed dimensions
- Base plate and fixing detail prepared for mounting on wall or structural frame
Materials
- 304 stainless steel suitable for indoor and inland outdoor environments
- 316 stainless steel recommended for coastal or high-salt exposure areas
- Internal structural support frame if required for large or deep recessed forms
- Material grade confirmed before cutting based on your project location
Specification Table
| Material | 304 or 316 stainless steel |
|---|---|
| Size | Custom size, including 200cm, 180cm, 150cm, 120cm, 100cm, 80cm, 60cm, 40cm, 30cm |
| Thickness | 1mm to 4mm |
| Finish | Hand polished to mirror finish |
| Shape | Concave recessed panel |
| Packing | Outer standard wooden crate, inner in plastic or foam |
| Custom Input Accepted | Photo or drawing from customer |
| Application | Indoor and outdoor walls, hotels, malls, offices, public spaces |
| Wind Load Rating | TBC |
Additional figures quoted elsewhere for this item are still being confirmed with the factory and are marked TBC rather than published here.
How We Make It
- Confirm the shape, size and finish from your drawing, photo or 3D file
- Select the appropriate stainless steel grade based on environmental exposure
- Cut and form the stainless steel panel to the concave recessed profile
- Hand-polish the surface to achieve a mirror finish across the entire panel
- Inspect the panel for surface quality and dimensional accuracy
- Package in a wooden crate with foam or plastic lining and prepare for ocean freight
How It Is Checked
- Kapur runs its own QC team independent of the fabrication crew
- Inspection at every stage from cutting through to final packing
- Digital photos supplied at each stage for your approval before proceeding
- Weekly production reports sent during the build window
- Your own QC team or third party inspector is welcome to visit the factory
Certifications
No certification is claimed for this piece because none is documented on our source records. Tell us what your local authority or main contractor requires and we will confirm per project before you order.
From Your Drawing to the Vessel
Every project runs through the same six stages, and you see photographs at each one before the next begins.
Enquiry
Send dimensions, a reference photo or drawing and the site conditions
Design
Our designers confirm the form, material grade and finish with you
Fabrication
Frame built, panels cut and formed, shell welded section by section
Finishing
Seams ground back and the surface polished or left to weather
Inspection
Our QC team checks each stage and sends digital pictures
Crating
Outer wooden crate, inner plastic or foam, then loading on vessel
What You Can Change
- Overall size customised to your drawing or site measurement
- Choice of 304 or 316 stainless steel based on location
- Mirror finish hand-polished to eliminate visible marks
- Available in gold or other colours on request
- Base plate and fixing details adapted to your wall or structural support
- OEM and ODM orders accepted from samples, drawings or photos
Ordering and Care
- Send your site dimensions, viewing angle and a reference photo or drawing when enquiring
- Confirm 304 or 316 based on proximity to the sea or exposure to de-icing salt
- Ensure the wall surface is level and structurally sound to support the panel and mounting system
- Allow access for mounting tools and a small crane or lifting device if the panel is large
- Clean with water and a soft cloth; avoid abrasive pads or cleaners on the mirror finish
- Rinse regularly at coastal sites to prevent salt residue from dulling the polish
How It Compares With Other Options
An honest read on the trade-offs, so the material decision is made before fabrication starts.
| Corten weathering steel wall panel | Corten develops a rust patina over time and requires no coating, but it is not reflective and may stain adjacent surfaces |
|---|---|
| Fiberglass wall decor | Fiberglass is lighter and cheaper to ship, takes any colour, but it is not as durable as stainless steel in high-traffic or outdoor environments |
| Painted steel wall panel | Painted steel is lower cost but requires recoating over time; stainless steel maintains its finish without repainting |
| Glass mirror panel | Glass is more fragile and prone to breakage; stainless steel offers the same reflective surface with greater impact resistance |
Project Types for This Piece
More From Stainless Steel Wall Decorations
Questions About This Sculpture
Can you make this in a size that is not listed?
Yes. Size is custom on this piece. Send your dimensions and we will confirm feasibility and price.
How long does production and shipping take?
Production takes 25-30 days and ocean transport a further 15-20 days. Some items are held in stock, which shortens the production window.
Should I choose 304 or 316 stainless steel?
304 covers most indoor and inland outdoor applications. 316 is recommended for coastal areas or where de-icing salt is used.
Can you work from my own design?
Yes. Orders are accepted from your photo or drawing, and OEM and ODM work is welcome. Send a 3D file, sketch or detail pictures.
How is the wall decor packed for sea freight?
Each piece ships in an outer standard wooden crate with plastic or foam lining inside to protect the mirror finish.
Can I inspect the decor before it ships?
Yes. Our QC team inspects at all stages up to loading on the vessel and supplies digital pictures, and your own QC team is welcome in the factory.
Do you supply a certificate or load calculation?
Certification and structural documentation are confirmed per project. Tell us what your local authority requires when you send the enquiry.
Request a Quote for This Sculpture
Send your dimensions, the installation site and the finish you want. We will confirm the material grade, price and production window.