Stainless Steel Stone Wall Decorations Irregular Pebbles
A custom irregular pebble-shaped wall decoration in 304 or 316 stainless steel, fabricated to your specified size and form rather than a fixed catalogue dimension. The piece is built as a welded shell over an internal frame, then
What This Piece Is
A custom irregular pebble-shaped wall decoration in 304 or 316 stainless steel, fabricated to your specified size and form rather than a fixed catalogue dimension. The piece is built as a welded shell over an internal frame, then ground and polished to a smooth finish so the seams are not visible. Because stainless steel resists corrosion and high temperature, the same piece works in an indoor atrium, a hotel corridor, or an outdoor plaza without a protective enclosure. Kapur builds it from your photo, drawing, or 3D file, and inspects it at every stage from fabrication through to loading on the vessel.
Key Benefits
- Made to your dimensions instead of a fixed catalogue size so it fits the actual wall space and sightlines
- 304 or 316 stainless steel selected against the installation environment rather than defaulted to one grade
- Mirror or brushed finish carried across every curved face so welds are not visible in daylight
- Corrosion and high temperature resistance allow permanent indoor or outdoor installation without seasonal removal
- Built from a photo, drawing or 3D file so an architect’s concept can be produced directly
- Inspected at each production stage with digital photos sent before shipment
Buyers and Specifiers
- Interior designers specifying a textured wall feature in a modern building
- Property developers commissioning wall art for high-end residential or commercial units
- Hotel chains standardising a design language across multiple locations
- Landscape architects integrating metal wall art into garden or plaza designs
- Sculpture galleries sourcing custom wall pieces from China
- Importers sourcing large metal wall decor for international distribution
What It Fixes
- Fixed catalogue sizes rarely suit a real wall so the piece is made to your dimension
- Painted steel fades and needs recoating while stainless steel keeps its finish outdoors
- Welded seams on curved forms often show under light so joints are ground back and repolished
- Buyers cannot inspect an overseas factory so digital photos are supplied at each stage
- Large wall sculptures are damaged in transit so each piece ships in a wooden crate with foam or plastic lining
Where This Sculpture Is Installed
Hotel lobbies and reception areas needing a textured wall feature with reflective surface
Shopping mall corridors and atriums with curved or irregular wall surfaces
Residential building foyers and private homes with modern interior design
Outdoor plazas and garden walls where the piece must withstand weather
Corporate office lobbies and business centre entrances with high foot traffic
Public art installations in urban parks and civic spaces
How It Is Built
- Welded shell construction over an internal support frame for structural stability
- Grade selected between 304 and 316 according to indoor or outdoor exposure
- Surface ground and polished after welding so seam lines are removed
- Curvature and overall height set by the customer rather than fixed
- Any shape reproduced from a supplied sample drawing or reference photo
- Base plate and fixing detail prepared for the installation surface
Materials
- 304 stainless steel for inland gardens, plazas and interior installations
- 316 stainless steel where coastal salt air or de-icing salt is a factor
- Internal steel frame carrying the load behind the visible shell
- Material grade confirmed with you before cutting rather than assumed
Specification Table
| Material | 304 or 316 stainless steel |
|---|---|
| Size | Custom size |
| Shape | Any shape, curvature and height made to order |
| Finish | Polished stainless steel surface |
| Packing | Outer standard wooden crate, inner in plastic or foam |
| Production Time | 25-30 days |
| Transport Time | 15-20 days |
| Custom Input Accepted | Photo or drawing from customer |
| Application | Indoor and outdoor walls, hotels, malls, plazas |
| Wind Load Rating | TBC |
How We Make It
- Confirm the form from your photo, drawing or 3D file and agree final dimensions
- Build the internal frame and set out the irregular pebble geometry
- Cut and form the stainless steel panels to the developed surface
- Weld the shell to the frame section by section
- Grind the seams flat and polish the whole surface to the agreed finish
- Inspect, photograph and crate for ocean freight
How It Is Checked
- Kapur runs its own QC team rather than relying on the fabrication crew to sign off their work
- Inspection at all stages from production up to loading on vessel
- Digital pictures supplied at each stage so you can approve before the next step
- Weekly reports during the production window
- Your own QC team or third party inspector is welcome to check quality in our factory
Certifications
No certification is claimed for this piece because none is documented on our source records. Tell us what your local authority or main contractor requires and we will confirm per project before you order.
From Your Drawing to the Vessel
Every project runs through the same six stages, and you see photographs at each one before the next begins.
Enquiry
Send dimensions, a reference photo or drawing and the site conditions
Design
Our designers confirm the form, material grade and finish with you
Fabrication
Frame built, panels cut and formed, shell welded section by section
Finishing
Seams ground back and the surface polished or left to weather
Inspection
Our QC team checks each stage and sends digital pictures
Crating
Outer wooden crate, inner plastic or foam, then loading on vessel
What You Can Change
- Overall height and curvature set to your drawing
- Choice of 304 or 316 stainless steel
- Mirror polished or brushed surface finish
- Coloured or coated variants on request
- Base plate and fixing detail adapted to your foundation
- OEM and ODM orders accepted
Ordering and Care
- Send the wall dimensions, viewing distance and a reference photo or drawing when you enquire
- Confirm 304 or 316 based on distance to the sea and exposure to road salt
- Prepare a level concrete or structural wall surface matched to the base plate drawing supplied
- Allow access for a crane or lifting equipment on the installation day for large pieces
- Wash the surface with water and a soft cloth and avoid abrasive pads on a mirror finish
- Rinse more often at coastal sites to stop salt deposits marking the polish
How It Compares With Other Options
An honest read on the trade-offs, so the material decision is made before fabrication starts.
| Corten weathering steel wall decoration | Corten develops a stable rust patina over time and suits natural planting, while stainless steel maintains a bright, reflective surface and resists rust |
|---|---|
| Fiberglass wall decoration | Fiberglass is lighter and cheaper to ship and takes any colour, but it will not last as long outdoors as stainless steel |
| Painted carbon steel wall panel | Painted steel costs less initially but needs recoating, whereas stainless steel keeps its finish without a paint cycle |
| Bronze wall sculpture | Bronze develops a patina and suits figurative or classical work, while stainless steel suits modern, geometric forms and requires less maintenance |
Project Types for This Piece
More From Stainless Steel Wall Decorations
Questions About This Sculpture
Can you make this in a size that is not listed?
Yes. Size is custom on this piece, and both curvature and height are made to your drawing. Send your dimensions and we will confirm feasibility and price.
How long does production and shipping take?
Production takes 25-30 days and ocean transport a further 15-20 days. Some items are held in stock, which shortens the production window.
Should I choose 304 or 316 stainless steel?
304 covers most indoor and inland outdoor installations. 316 is the safer choice near the coast or where de-icing salt is used, because it resists chloride corrosion better.
Can you work from my own design?
Yes. Orders are accepted from your photo or drawing, and OEM and ODM work is welcome. Send a 3D file, a sketch or detail pictures and our design team will work from it.
How is the sculpture packed for sea freight?
Each piece ships in an outer standard wooden crate with plastic or foam lining inside to protect the polished surface during handling.
Can I inspect the sculpture before it ships?
Yes. Our QC team inspects at all stages up to loading on the vessel and supplies digital pictures, and your own QC team is welcome to check quality in our factory.
Do you supply a certificate or load calculation?
Certification and structural documentation are confirmed per project. Tell us what your local authority requires when you send the enquiry.
Request a Quote for This Sculpture
Send your dimensions, the installation site and the finish you want. We will confirm the material grade, price and production window.