200mm Kapoor Modern Art Stainless Steel Mirror Concave Wall Decoration
A concave mirror-polished stainless steel wall decoration in 304 or 316 grade, with a diameter of 200mm as standard but available in any size from 30cm to 200cm and beyond. The curved surface is formed from a single sheet of metal
What This Piece Is
A concave mirror-polished stainless steel wall decoration in 304 or 316 grade, with a diameter of 200mm as standard but available in any size from 30cm to 200cm and beyond. The curved surface is formed from a single sheet of metal, hand-polished to a mirror finish so reflections are clear and uninterrupted. Because stainless steel resists corrosion and high temperature, the piece maintains its reflective surface in indoor and outdoor environments without requiring protective coating. Kapur builds it from your photo, drawing or 3D file, and inspects it at every stage from fabrication through to loading on the vessel.
Key Benefits
- Available in any size from 30cm to 200cm and beyond, so it fits your wall or space exactly
- 304 or 316 stainless steel selected based on the installation environment rather than defaulting to one grade
- Hand-polished mirror finish across the entire curved surface with no visible seams or tool marks
- Corrosion and high temperature resistance allow permanent indoor or outdoor installation without coating
- Built from your photo, drawing or 3D file so your design concept is reproduced directly
- Inspected at each production stage with digital photos sent before shipment
Buyers and Specifiers
- Interior designers specifying a reflective wall feature for a high-end space
- Hotel and property developers commissioning custom wall art for public areas
- Architects integrating a functional and aesthetic metal panel into a façade or interior
- Sculpture galleries and importers sourcing large mirror-finish metal panels from China
- Public art consultants needing a durable, low-maintenance wall sculpture for civic spaces
What It Fixes
- Fixed catalogue sizes do not fit real wall dimensions so the piece is made to your exact size
- Painted or coated metal fades and requires recoating while stainless steel keeps its finish
- Welded seams on curved surfaces show under light so the entire surface is hand-polished
- Buyers cannot inspect an overseas factory so digital photos are supplied at each stage
- Large wall panels are damaged in transit so each piece ships in a wooden crate with foam lining
Where This Sculpture Is Installed
Hotel lobbies and reception areas where a reflective surface enhances ambient light
Corporate offices and executive suites needing a modern wall feature with visual depth
Shopping mall interiors and atriums where the mirror effect adds scale and light
Residential interiors with large wall spaces that need a focal point with reflective quality
Outdoor courtyards and garden walls where the surface reflects sky and foliage
Sculpture galleries and art installations using reflective geometry as a design element
How It Is Built
- Single sheet of stainless steel formed into a concave curve without seams
- Grade selected between 304 and 316 based on exposure to moisture or salt
- Hand-polished to a mirror finish across the entire curved surface
- Thickness between 1mm and 4mm depending on size and structural needs
- Any diameter made to your drawing or reference photo, including 200mm as standard
- Base plate and fixing detail prepared for mounting on wall or structural support
Materials
- 304 stainless steel for indoor use and inland outdoor environments
- 316 stainless steel for coastal areas or locations with high chloride exposure
- Single sheet of metal formed into a concave shape without welding
- Material grade confirmed with you before cutting rather than assumed
Specification Table
| Material | 304 or 316 stainless steel |
|---|---|
| Size | Custom size, including 200cm, 180cm, 150cm, 120cm, 100cm, 80cm, 60cm, 40cm, 30cm |
| Shape | Concave mirror-polished wall panel |
| Finish | Hand-polished mirror finish |
| Thickness | 1mm to 4mm |
| Packing | Outer standard wooden crate, inner in plastic or foam |
| Custom Input Accepted | Photo or drawing from customer |
| Application | Indoor and outdoor walls, lobbies, gardens, shopping malls, hotels |
| Wind Load Rating | TBC |
Additional figures quoted elsewhere for this item are still being confirmed with the factory and are marked TBC rather than published here.
How We Make It
- Confirm the form from your photo, drawing or 3D file and agree final dimensions
- Select the material grade (304 or 316) based on installation environment
- Cut the stainless steel sheet to the required diameter and thickness
- Form the sheet into a concave curve using mechanical or hand techniques
- Hand-polish the entire surface to a mirror finish to remove tool marks
- Inspect, photograph and crate for ocean freight
How It Is Checked
- Kapur runs its own QC team rather than relying on the fabrication crew to sign off their work
- Inspection at all stages from production up to loading on vessel
- Digital pictures supplied at each stage so you can approve before the next step
- Weekly reports during the production window
- Your own QC team or third party inspector is welcome to check quality in our factory
Certifications
No certification is claimed for this piece because none is documented on our source records. Tell us what your local authority or main contractor requires and we will confirm per project before you order.
From Your Drawing to the Vessel
Every project runs through the same six stages, and you see photographs at each one before the next begins.
Enquiry
Send dimensions, a reference photo or drawing and the site conditions
Design
Our designers confirm the form, material grade and finish with you
Fabrication
Frame built, panels cut and formed, shell welded section by section
Finishing
Seams ground back and the surface polished or left to weather
Inspection
Our QC team checks each stage and sends digital pictures
Crating
Outer wooden crate, inner plastic or foam, then loading on vessel
What You Can Change
- Overall diameter and curvature set to your drawing
- Choice of 304 or 316 stainless steel
- Mirror polished finish across the entire surface
- Coloured or coated variants on request
- Base plate and fixing detail adapted to your wall or structure
- OEM and ODM orders accepted
Ordering and Care
- Send the wall dimensions, viewing angle and a reference photo or drawing when you enquire
- Confirm 304 or 316 based on distance to the sea and exposure to road salt
- Prepare a solid wall or structural support matched to the base plate drawing supplied
- Allow access for mounting tools and a level surface during installation
- Clean the surface with water and a soft cloth; avoid abrasive pads on the mirror finish
- Rinse more often at coastal sites to prevent salt deposits from marking the polish
How It Compares With Other Options
An honest read on the trade-offs, so the material decision is made before fabrication starts.
| Corten weathering steel wall panel | Corten develops a stable rust patina and suits natural or industrial settings, while stainless steel maintains a bright, reflective surface in modern interiors and outdoor plazas |
|---|---|
| Fiberglass wall panel | Fiberglass is lighter and cheaper to ship and takes any colour, but it is not as durable as stainless steel in high-traffic or outdoor environments |
| Painted steel wall panel | Painted steel costs less initially but requires recoating; stainless steel keeps its finish without a paint cycle |
| Glass mirror panel | Glass is more fragile and prone to breakage during transport; stainless steel is impact-resistant and survives ocean freight better |
Project Types for This Piece
More From Stainless Steel Wall Decorations
Questions About This Sculpture
Can you make this in a size that is not listed?
Yes. Size is custom on this piece, and any diameter from 30cm to 200cm and beyond is available. Send your dimensions and we will confirm feasibility and price.
How long does production and shipping take?
Production takes 25-30 days and ocean transport a further 15-20 days. Some items are held in stock, which shortens the production window.
Should I choose 304 or 316 stainless steel?
304 covers most indoor and inland outdoor environments. 316 is the safer choice near the coast or where de-icing salt is used, because it resists chloride corrosion better.
Can you work from my own design?
Yes. Orders are accepted from your photo or drawing, and OEM and ODM work is welcome. Send a 3D file, a sketch or detail pictures and our design team will work from it.
How is the decoration packed for sea freight?
Each piece ships in an outer standard wooden crate with plastic or foam lining inside to protect the polished surface during handling.
Can I inspect the decoration before it ships?
Yes. Our QC team inspects at all stages up to loading on the vessel and supplies digital pictures, and your own QC team is welcome to check quality in our factory.
Do you supply a certificate or load calculation?
Certification and structural documentation are confirmed per project. Tell us what your local authority requires when you send the enquiry.
Request a Quote for This Sculpture
Send your dimensions, the installation site and the finish you want. We will confirm the material grade, price and production window.