MS-285 30 inch Split Cowhide Welding Jacket
The MS-285 is a 30 inch brown split cowhide welding jacket with 9 oz green flame-resistant treated cotton on the back and collar. Leather covers the front and arms that face the arc; cotton on the back keeps the jacket from turning into an oven.
- Leather front and sleeves take spatter where it actually lands
- FR cotton back panel vents heat during long welds
- Snap closure and inside pocket keep the front clean of hardware
- Available to 5XL for sites that need full size coverage
Manufactured by Guangxi Dahua Mingshun Protective Products Co., Ltd in Dahua County, Guangxi, China. OEM and ODM available.
Who It Is For
- Welders in heavy fabrication
- Distributors stocking a mid-weight leather jacket
- Plants issuing jackets to full-time welders
Problems It Solves
- All-leather jackets trap heat against the back during long welds
- Cotton-only jackets do not survive heavy spatter on the front
- Limited size ranges leave larger welders in ill-fitting gear
Technical Data
| Model | MS-285 |
|---|---|
| Category | Leather Welding Jackets/Trousers |
| Size Range | S~5XL |
| Material | 9 oz. green flame-resistant treated cotton on back/collar |
| Standards | ASTM D6413, CE |
| Customisation | OEM and ODM, custom colours, labels and packaging |
Technical Features
- 9 oz. green flame-resistant treated cotton on back/collar
- Brown split cowhide
- Snap closure
- Inside pocket
Applications And Industries
- Welding
Where This Model Is Used
Heavy fabrication welding
Structural steel work
Shipyard welding
Maintenance and repair welding
How This Product Is Made And Checked
Raw Material Inspection
Leather and FR fabric are checked for thickness, grain, colour consistency and defects before cutting.
Cutting Control
Panels are cut to the pattern set for each model, with waste and orientation checked so the leather grain runs correctly.
In-Line Sewing Check
Kevlar thread, stitch density and reinforcement points are checked on the line while the garment is still being built.
Finished Product Inspection
Sizing, closures, snaps, straps and labelling are verified against the model specification.
Packing Inspection
Quantities, size splits, inner packing and carton marks are checked against the order before shipment.
Standards referenced on this model: ASTM D6413, CE. Test reports are supplied with export orders on request.
Use Guide
- Wear with leather sleeves or a cape for overhead work
- Keep the leather dry and brush off slag rather than washing it
- Inspect the cotton back panel for scorch damage before each shift
Customisation Options
- Custom colours and leather combinations
- Own-brand labels, hang tags and cuff branding
- Custom size charts and mixed size splits
- Polybag printing, inner packing and carton marks
How It Compares With Other Models
| MS-386 all-leather jacket | MS-386 gives full leather cover; MS-285 is cooler thanks to the FR cotton back |
|---|---|
| MS-1260 FR cotton body jacket | MS-1260 is lighter again, with leather only on the sleeves |
Questions About The MS-285
What sizes are available?
Which parts are cotton?
What standard does the FR cotton conform to?
How long is the jacket?
Is OEM branding available?
Guides That Cover This Product
Request A Quotation For The MS-285
Send the quantity, size split and any branding requirement. We will reply with pricing, lead time and sample options.